linux/sound/soc/cirrus/ep93xx-ac97.c
Lars-Peter Clausen 453807f300 ASoC: ep93xx: Use ep93xx_dma_params instead of ep93xx_pcm_dma_params
Currently the ep93xx_dma_params struct which is passed to the dmaengine driver
is constructed at runtime from the ep93xx_pcm_dma_params that gets passed to the
ep93xx PCM driver from one of the ep93xx DAI drivers. The ep93xx_pcm_dma_params
struct is almost identical to the ep93xx_dma_params struct. The only missing
field is the 'direction' field, which is computed at runtime in the PCM driver
based on the current substream. Since we know in advance which
ep93xx_pcm_dma_params struct is being used for which substream at compile time,
we also already know which direction to use at compile time. So we can easily
replace all instances of ep93xx_pcm_dma_params with their ep93xx_dma_params
counterpart. This allows us to simplify the code in the ep93xx pcm driver quite
a bit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26 14:16:52 +00:00

438 lines
11 KiB
C

/*
* ASoC driver for Cirrus Logic EP93xx AC97 controller.
*
* Copyright (c) 2010 Mika Westerberg
*
* Based on s3c-ac97 ASoC driver by Jaswinder Singh.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/ac97_codec.h>
#include <sound/soc.h>
#include <linux/platform_data/dma-ep93xx.h>
/*
* Per channel (1-4) registers.
*/
#define AC97CH(n) (((n) - 1) * 0x20)
#define AC97DR(n) (AC97CH(n) + 0x0000)
#define AC97RXCR(n) (AC97CH(n) + 0x0004)
#define AC97RXCR_REN BIT(0)
#define AC97RXCR_RX3 BIT(3)
#define AC97RXCR_RX4 BIT(4)
#define AC97RXCR_CM BIT(15)
#define AC97TXCR(n) (AC97CH(n) + 0x0008)
#define AC97TXCR_TEN BIT(0)
#define AC97TXCR_TX3 BIT(3)
#define AC97TXCR_TX4 BIT(4)
#define AC97TXCR_CM BIT(15)
#define AC97SR(n) (AC97CH(n) + 0x000c)
#define AC97SR_TXFE BIT(1)
#define AC97SR_TXUE BIT(6)
#define AC97RISR(n) (AC97CH(n) + 0x0010)
#define AC97ISR(n) (AC97CH(n) + 0x0014)
#define AC97IE(n) (AC97CH(n) + 0x0018)
/*
* Global AC97 controller registers.
*/
#define AC97S1DATA 0x0080
#define AC97S2DATA 0x0084
#define AC97S12DATA 0x0088
#define AC97RGIS 0x008c
#define AC97GIS 0x0090
#define AC97IM 0x0094
/*
* Common bits for RGIS, GIS and IM registers.
*/
#define AC97_SLOT2RXVALID BIT(1)
#define AC97_CODECREADY BIT(5)
#define AC97_SLOT2TXCOMPLETE BIT(6)
#define AC97EOI 0x0098
#define AC97EOI_WINT BIT(0)
#define AC97EOI_CODECREADY BIT(1)
#define AC97GCR 0x009c
#define AC97GCR_AC97IFE BIT(0)
#define AC97RESET 0x00a0
#define AC97RESET_TIMEDRESET BIT(0)
#define AC97SYNC 0x00a4
#define AC97SYNC_TIMEDSYNC BIT(0)
#define AC97_TIMEOUT msecs_to_jiffies(5)
/**
* struct ep93xx_ac97_info - EP93xx AC97 controller info structure
* @lock: mutex serializing access to the bus (slot 1 & 2 ops)
* @dev: pointer to the platform device dev structure
* @regs: mapped AC97 controller registers
* @done: bus ops wait here for an interrupt
*/
struct ep93xx_ac97_info {
struct mutex lock;
struct device *dev;
void __iomem *regs;
struct completion done;
};
/* currently ALSA only supports a single AC97 device */
static struct ep93xx_ac97_info *ep93xx_ac97_info;
static struct ep93xx_dma_data ep93xx_ac97_pcm_out = {
.name = "ac97-pcm-out",
.dma_port = EP93XX_DMA_AAC1,
.direction = DMA_MEM_TO_DEV,
};
static struct ep93xx_dma_data ep93xx_ac97_pcm_in = {
.name = "ac97-pcm-in",
.dma_port = EP93XX_DMA_AAC1,
.direction = DMA_DEV_TO_MEM,
};
static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info,
unsigned reg)
{
return __raw_readl(info->regs + reg);
}
static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info,
unsigned reg, unsigned val)
{
__raw_writel(val, info->regs + reg);
}
static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
{
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
unsigned short val;
mutex_lock(&info->lock);
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID);
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) {
dev_warn(info->dev, "timeout reading register %x\n", reg);
mutex_unlock(&info->lock);
return -ETIMEDOUT;
}
val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA);
mutex_unlock(&info->lock);
return val;
}
static void ep93xx_ac97_write(struct snd_ac97 *ac97,
unsigned short reg,
unsigned short val)
{
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
mutex_lock(&info->lock);
/*
* Writes to the codec need to be done so that slot 2 is filled in
* before slot 1.
*/
ep93xx_ac97_write_reg(info, AC97S2DATA, val);
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE);
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
dev_warn(info->dev, "timeout writing register %x\n", reg);
mutex_unlock(&info->lock);
}
static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
mutex_lock(&info->lock);
/*
* We are assuming that before this functions gets called, the codec
* BIT_CLK is stopped by forcing the codec into powerdown mode. We can
* control the SYNC signal directly via AC97SYNC register. Using
* TIMEDSYNC the controller will keep the SYNC high > 1us.
*/
ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC);
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
dev_warn(info->dev, "codec warm reset timeout\n");
mutex_unlock(&info->lock);
}
static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
mutex_lock(&info->lock);
/*
* For doing cold reset, we disable the AC97 controller interface, clear
* WINT and CODECREADY bits, and finally enable the interface again.
*/
ep93xx_ac97_write_reg(info, AC97GCR, 0);
ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT);
ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE);
/*
* Now, assert the reset and wait for the codec to become ready.
*/
ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET);
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
dev_warn(info->dev, "codec cold reset timeout\n");
/*
* Give the codec some time to come fully out from the reset. This way
* we ensure that the subsequent reads/writes will work.
*/
usleep_range(15000, 20000);
mutex_unlock(&info->lock);
}
static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id)
{
struct ep93xx_ac97_info *info = dev_id;
unsigned status, mask;
/*
* Just mask out the interrupt and wake up the waiting thread.
* Interrupts are cleared via reading/writing to slot 1 & 2 registers by
* the waiting thread.
*/
status = ep93xx_ac97_read_reg(info, AC97GIS);
mask = ep93xx_ac97_read_reg(info, AC97IM);
mask &= ~status;
ep93xx_ac97_write_reg(info, AC97IM, mask);
complete(&info->done);
return IRQ_HANDLED;
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = ep93xx_ac97_read,
.write = ep93xx_ac97_write,
.reset = ep93xx_ac97_cold_reset,
.warm_reset = ep93xx_ac97_warm_reset,
};
EXPORT_SYMBOL_GPL(soc_ac97_ops);
static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
unsigned v = 0;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
* Enable compact mode, TX slots 3 & 4, and the TX FIFO
* itself.
*/
v |= AC97TXCR_CM;
v |= AC97TXCR_TX3 | AC97TXCR_TX4;
v |= AC97TXCR_TEN;
ep93xx_ac97_write_reg(info, AC97TXCR(1), v);
} else {
/*
* Enable compact mode, RX slots 3 & 4, and the RX FIFO
* itself.
*/
v |= AC97RXCR_CM;
v |= AC97RXCR_RX3 | AC97RXCR_RX4;
v |= AC97RXCR_REN;
ep93xx_ac97_write_reg(info, AC97RXCR(1), v);
}
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
* As per Cirrus EP93xx errata described below:
*
* http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf
*
* we will wait for the TX FIFO to be empty before
* clearing the TEN bit.
*/
unsigned long timeout = jiffies + AC97_TIMEOUT;
do {
v = ep93xx_ac97_read_reg(info, AC97SR(1));
if (time_after(jiffies, timeout)) {
dev_warn(info->dev, "TX timeout\n");
break;
}
} while (!(v & (AC97SR_TXFE | AC97SR_TXUE)));
/* disable the TX FIFO */
ep93xx_ac97_write_reg(info, AC97TXCR(1), 0);
} else {
/* disable the RX FIFO */
ep93xx_ac97_write_reg(info, AC97RXCR(1), 0);
}
break;
default:
dev_warn(info->dev, "unknown command %d\n", cmd);
return -EINVAL;
}
return 0;
}
static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct ep93xx_dma_data *dma_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
dma_data = &ep93xx_ac97_pcm_out;
else
dma_data = &ep93xx_ac97_pcm_in;
snd_soc_dai_set_dma_data(dai, substream, dma_data);
return 0;
}
static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
.startup = ep93xx_ac97_startup,
.trigger = ep93xx_ac97_trigger,
};
static struct snd_soc_dai_driver ep93xx_ac97_dai = {
.name = "ep93xx-ac97",
.id = 0,
.ac97_control = 1,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
.capture = {
.stream_name = "AC97 Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
.ops = &ep93xx_ac97_dai_ops,
};
static int ep93xx_ac97_probe(struct platform_device *pdev)
{
struct ep93xx_ac97_info *info;
struct resource *res;
unsigned int irq;
int ret;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
info->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
irq = platform_get_irq(pdev, 0);
if (!irq)
return -ENODEV;
ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt,
IRQF_TRIGGER_HIGH, pdev->name, info);
if (ret)
goto fail;
dev_set_drvdata(&pdev->dev, info);
mutex_init(&info->lock);
init_completion(&info->done);
info->dev = &pdev->dev;
ep93xx_ac97_info = info;
platform_set_drvdata(pdev, info);
ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai);
if (ret)
goto fail;
return 0;
fail:
platform_set_drvdata(pdev, NULL);
ep93xx_ac97_info = NULL;
dev_set_drvdata(&pdev->dev, NULL);
return ret;
}
static int ep93xx_ac97_remove(struct platform_device *pdev)
{
struct ep93xx_ac97_info *info = platform_get_drvdata(pdev);
snd_soc_unregister_dai(&pdev->dev);
/* disable the AC97 controller */
ep93xx_ac97_write_reg(info, AC97GCR, 0);
platform_set_drvdata(pdev, NULL);
ep93xx_ac97_info = NULL;
dev_set_drvdata(&pdev->dev, NULL);
return 0;
}
static struct platform_driver ep93xx_ac97_driver = {
.probe = ep93xx_ac97_probe,
.remove = ep93xx_ac97_remove,
.driver = {
.name = "ep93xx-ac97",
.owner = THIS_MODULE,
},
};
module_platform_driver(ep93xx_ac97_driver);
MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ep93xx-ac97");