forked from Minki/linux
9eb0e5f9b2
The DAI mode is and should be configured by the sound card driver as codec and ssi have to be in the right modes to communicate with each other. It is possible to operate the ssi unit or the codec in master mode, sometimes even on the same board in different configurations. With the latest changes in the fsl-ssi driver, the 'fsl,mode' property is only handled as a fallback property. If the sound card sets the DAI mode correctly, this fallback configuration is dropped. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
274 lines
5.5 KiB
Plaintext
274 lines
5.5 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "imx27-eukrea-cpuimx27.dtsi"
|
|
|
|
/ {
|
|
model = "Eukrea MBIMXSD27";
|
|
compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
|
|
|
|
display0: CMO-QVGA {
|
|
model = "CMO-QVGA";
|
|
native-mode = <&timing0>;
|
|
bits-per-pixel = <16>;
|
|
fsl,pcr = <0xfad08b80>;
|
|
|
|
display-timings {
|
|
timing0: 320x240 {
|
|
clock-frequency = <6500000>;
|
|
hactive = <320>;
|
|
vactive = <240>;
|
|
hback-porch = <20>;
|
|
hsync-len = <30>;
|
|
hfront-porch = <38>;
|
|
vback-porch = <4>;
|
|
vsync-len = <3>;
|
|
vfront-porch = <15>;
|
|
};
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "gpio-backlight";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_backlight>;
|
|
gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpioleds>;
|
|
|
|
led1 {
|
|
label = "system::live";
|
|
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led2 {
|
|
label = "system::user";
|
|
gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "simple-bus";
|
|
|
|
reg_lcd: regulator@0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcdreg>;
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "LCD";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cspi1 {
|
|
pinctrl-0 = <&pinctrl_cspi1>;
|
|
fsl,spi-num-chipselects = <1>;
|
|
cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
ads7846 {
|
|
compatible = "ti,ads7846";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_touch>;
|
|
reg = <0>;
|
|
interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
|
|
spi-cpol;
|
|
spi-max-frequency = <1500000>;
|
|
ti,keep-vref-on;
|
|
};
|
|
};
|
|
|
|
&fb {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_imxfb>;
|
|
display = <&display0>;
|
|
lcd-supply = <®_lcd>;
|
|
fsl,dmacr = <0x00040060>;
|
|
fsl,lscr1 = <0x00120300>;
|
|
fsl,lpccr = <0x00a903ff>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
codec: codec@1a {
|
|
compatible = "ti,tlv320aic23";
|
|
reg = <0x1a>;
|
|
};
|
|
};
|
|
|
|
&kpp {
|
|
linux,keymap = <
|
|
MATRIX_KEY(0, 0, KEY_UP)
|
|
MATRIX_KEY(0, 1, KEY_DOWN)
|
|
MATRIX_KEY(1, 0, KEY_RIGHT)
|
|
MATRIX_KEY(1, 1, KEY_LEFT)
|
|
>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdhc1>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ssi1>;
|
|
codec-handle = <&codec>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
fsl,uart-has-rtscts;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
fsl,uart-has-rtscts;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
fsl,uart-has-rtscts;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
imx27-eukrea-cpuimx27-baseboard {
|
|
pinctrl_cspi1: cspi1grp {
|
|
fsl,pins = <
|
|
MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
|
|
MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
|
|
MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
|
|
MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_backlight: backlightgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_PWMO__GPIO5_5 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpioleds: gpioledsgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_PC_PWRON__GPIO6_16 0x0
|
|
MX27_PAD_PC_CD2_B__GPIO6_19 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_imxfb: imxfbgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_LD0__LD0 0x0
|
|
MX27_PAD_LD1__LD1 0x0
|
|
MX27_PAD_LD2__LD2 0x0
|
|
MX27_PAD_LD3__LD3 0x0
|
|
MX27_PAD_LD4__LD4 0x0
|
|
MX27_PAD_LD5__LD5 0x0
|
|
MX27_PAD_LD6__LD6 0x0
|
|
MX27_PAD_LD7__LD7 0x0
|
|
MX27_PAD_LD8__LD8 0x0
|
|
MX27_PAD_LD9__LD9 0x0
|
|
MX27_PAD_LD10__LD10 0x0
|
|
MX27_PAD_LD11__LD11 0x0
|
|
MX27_PAD_LD12__LD12 0x0
|
|
MX27_PAD_LD13__LD13 0x0
|
|
MX27_PAD_LD14__LD14 0x0
|
|
MX27_PAD_LD15__LD15 0x0
|
|
MX27_PAD_LD16__LD16 0x0
|
|
MX27_PAD_LD17__LD17 0x0
|
|
MX27_PAD_CONTRAST__CONTRAST 0x0
|
|
MX27_PAD_OE_ACD__OE_ACD 0x0
|
|
MX27_PAD_HSYNC__HSYNC 0x0
|
|
MX27_PAD_VSYNC__VSYNC 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdreg: lcdreggrp {
|
|
fsl,pins = <
|
|
MX27_PAD_CLS__GPIO1_25 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_sdhc1: sdhc1grp {
|
|
fsl,pins = <
|
|
MX27_PAD_SD1_CLK__SD1_CLK 0x0
|
|
MX27_PAD_SD1_CMD__SD1_CMD 0x0
|
|
MX27_PAD_SD1_D0__SD1_D0 0x0
|
|
MX27_PAD_SD1_D1__SD1_D1 0x0
|
|
MX27_PAD_SD1_D2__SD1_D2 0x0
|
|
MX27_PAD_SD1_D3__SD1_D3 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ssi1: ssi1grp {
|
|
fsl,pins = <
|
|
MX27_PAD_SSI4_CLK__SSI4_CLK 0x0
|
|
MX27_PAD_SSI4_FS__SSI4_FS 0x0
|
|
MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1
|
|
MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1
|
|
>;
|
|
};
|
|
|
|
pinctrl_touch: touchgrp {
|
|
fsl,pins = <
|
|
MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX27_PAD_UART1_TXD__UART1_TXD 0x0
|
|
MX27_PAD_UART1_RXD__UART1_RXD 0x0
|
|
MX27_PAD_UART1_CTS__UART1_CTS 0x0
|
|
MX27_PAD_UART1_RTS__UART1_RTS 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX27_PAD_UART2_TXD__UART2_TXD 0x0
|
|
MX27_PAD_UART2_RXD__UART2_RXD 0x0
|
|
MX27_PAD_UART2_CTS__UART2_CTS 0x0
|
|
MX27_PAD_UART2_RTS__UART2_RTS 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX27_PAD_UART3_TXD__UART3_TXD 0x0
|
|
MX27_PAD_UART3_RXD__UART3_RXD 0x0
|
|
MX27_PAD_UART3_CTS__UART3_CTS 0x0
|
|
MX27_PAD_UART3_RTS__UART3_RTS 0x0
|
|
>;
|
|
};
|
|
};
|
|
};
|