forked from Minki/linux
8536239e37
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
263 lines
5.6 KiB
Plaintext
263 lines
5.6 KiB
Plaintext
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
/ {
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_2p5v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "2P5V";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6-wandboard-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx6-wandboard-sgtl5000";
|
|
ssi-controller = <&ssi1>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <1>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
|
|
sound-spdif {
|
|
compatible = "fsl,imx-audio-spdif";
|
|
model = "imx-spdif";
|
|
spdif-controller = <&spdif>;
|
|
spdif-out;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
codec: sgtl5000@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clks 201>;
|
|
VDDA-supply = <®_2p5v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
|
|
imx6qdl-wandboard {
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
|
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
|
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_spdif: spdifgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
|
|
MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
|
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
|
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii";
|
|
phy-reset-gpios = <&gpio3 29 0>;
|
|
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spdif>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
disable-over-current;
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
cd-gpios = <&gpio1 2 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
cd-gpios = <&gpio3 9 0>;
|
|
status = "okay";
|
|
};
|