Thomas Gleixner 8b0e195314 ktime: Cleanup ktime_set() usage ... ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>		2016-12-25 17:21:22 +01:00
..
accel	iio: accel: st_accel: inline per-sensor data	2016-11-19 12:25:36 +00:00
adc	iio: adc: Add support for STM32 ADC	2016-11-19 12:18:33 +00:00
amplifiers
buffer	iio: add resource managed triggered buffer init helpers	2016-09-04 15:42:46 +01:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	Third set of IIO new device support, features and cleanup for the 4.10 cycle.	2016-11-16 17:20:40 +01:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dpot-dac: DAC driver based on a digital potentiometer	2016-11-13 13:07:15 +00:00
dummy	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: gyro: st_gyro: inline per-sensor data	2016-11-12 15:38:09 +00:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: si7020: Add devicetree support and trivial bindings	2016-11-01 18:49:53 +00:00
imu	iio: imu: inv_mpu6050: inform the i2c mux core about how it is used	2016-11-12 14:44:45 +00:00
light	iio: tsl2583: make array large enough	2016-11-24 20:09:55 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: pressure: st_pressure: inline per-sensor data	2016-11-12 15:50:10 +00:00
proximity	iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management	2016-10-23 19:34:26 +01:00
temperature	iio: maxim_thermocouple: detect invalid storage size in read()	2016-11-13 10:08:32 +01:00
trigger	ktime: Cleanup ktime_set() usage	2016-12-25 17:21:22 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio: Use kmalloc_array() in iio_scan_mask_set()	2016-09-24 16:35:24 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: add a callback to allow drivers to provide _available attributes	2016-11-13 11:40:25 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: add helpers to query available values from channels	2016-11-13 11:40:26 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00