forked from Minki/linux
2296e5a013
Move the entry about CAPI 2.0 to the beginning and add a URL. Incorporate changes suggested by Randy Dunlap, thanks for proofreading. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
214 lines
8.2 KiB
Plaintext
214 lines
8.2 KiB
Plaintext
Kernel CAPI Interface to Hardware Drivers
|
|
-----------------------------------------
|
|
|
|
1. Overview
|
|
|
|
From the CAPI 2.0 specification:
|
|
COMMON-ISDN-API (CAPI) is an application programming interface standard used
|
|
to access ISDN equipment connected to basic rate interfaces (BRI) and primary
|
|
rate interfaces (PRI).
|
|
|
|
Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
|
|
hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
|
|
lingo) with Kernel CAPI to indicate their readiness to provide their service
|
|
to CAPI applications. CAPI applications also register with Kernel CAPI,
|
|
requesting association with a CAPI device. Kernel CAPI then dispatches the
|
|
application registration to an available device, forwarding it to the
|
|
corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
|
|
directions between the application and the hardware driver.
|
|
|
|
Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
|
|
This standard is freely available from http://www.capi.org.
|
|
|
|
|
|
2. Driver and Device Registration
|
|
|
|
CAPI drivers optionally register themselves with Kernel CAPI by calling the
|
|
Kernel CAPI function register_capi_driver() with a pointer to a struct
|
|
capi_driver. This structure must be filled with the name and revision of the
|
|
driver, and optionally a pointer to a callback function, add_card(). The
|
|
registration can be revoked by calling the function unregister_capi_driver()
|
|
with a pointer to the same struct capi_driver.
|
|
|
|
CAPI drivers must register each of the ISDN devices they control with Kernel
|
|
CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
|
|
struct capi_ctr before they can be used. This structure must be filled with
|
|
the names of the driver and controller, and a number of callback function
|
|
pointers which are subsequently used by Kernel CAPI for communicating with the
|
|
driver. The registration can be revoked by calling the function
|
|
detach_capi_ctr() with a pointer to the same struct capi_ctr.
|
|
|
|
Before the device can be actually used, the driver must fill in the device
|
|
information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
|
|
structure of the device, and signal its readiness by calling capi_ctr_ready().
|
|
From then on, Kernel CAPI may call the registered callback functions for the
|
|
device.
|
|
|
|
If the device becomes unusable for any reason (shutdown, disconnect ...), the
|
|
driver has to call capi_ctr_reseted(). This will prevent further calls to the
|
|
callback functions by Kernel CAPI.
|
|
|
|
|
|
3. Application Registration and Communication
|
|
|
|
Kernel CAPI forwards registration requests from applications (calls to CAPI
|
|
operation CAPI_REGISTER) to an appropriate hardware driver by calling its
|
|
register_appl() callback function. A unique Application ID (ApplID, u16) is
|
|
allocated by Kernel CAPI and passed to register_appl() along with the
|
|
parameter structure provided by the application. This is analogous to the
|
|
open() operation on regular files or character devices.
|
|
|
|
After a successful return from register_appl(), CAPI messages from the
|
|
application may be passed to the driver for the device via calls to the
|
|
send_message() callback function. The CAPI message to send is stored in the
|
|
data portion of an skb. Conversely, the driver may call Kernel CAPI's
|
|
capi_ctr_handle_message() function to pass a received CAPI message to Kernel
|
|
CAPI for forwarding to an application, specifying its ApplID.
|
|
|
|
Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
|
|
forwarded as calls to the release_appl() callback function, passing the same
|
|
ApplID as with register_appl(). After return from release_appl(), no CAPI
|
|
messages for that application may be passed to or from the device anymore.
|
|
|
|
|
|
4. Data Structures
|
|
|
|
4.1 struct capi_driver
|
|
|
|
This structure describes a Kernel CAPI driver itself. It is used in the
|
|
register_capi_driver() and unregister_capi_driver() functions, and contains
|
|
the following non-private fields, all to be set by the driver before calling
|
|
register_capi_driver():
|
|
|
|
char name[32]
|
|
the name of the driver, as a zero-terminated ASCII string
|
|
char revision[32]
|
|
the revision number of the driver, as a zero-terminated ASCII string
|
|
int (*add_card)(struct capi_driver *driver, capicardparams *data)
|
|
a callback function pointer (may be NULL)
|
|
|
|
|
|
4.2 struct capi_ctr
|
|
|
|
This structure describes an ISDN device (controller) handled by a Kernel CAPI
|
|
driver. After registration via the attach_capi_ctr() function it is passed to
|
|
all controller specific lower layer interface and callback functions to
|
|
identify the controller to operate on.
|
|
|
|
It contains the following non-private fields:
|
|
|
|
- to be set by the driver before calling attach_capi_ctr():
|
|
|
|
struct module *owner
|
|
pointer to the driver module owning the device
|
|
|
|
void *driverdata
|
|
an opaque pointer to driver specific data, not touched by Kernel CAPI
|
|
|
|
char name[32]
|
|
the name of the controller, as a zero-terminated ASCII string
|
|
|
|
char *driver_name
|
|
the name of the driver, as a zero-terminated ASCII string
|
|
|
|
int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
|
|
(optional) pointer to a callback function for sending firmware and
|
|
configuration data to the device
|
|
|
|
void (*reset_ctr)(struct capi_ctr *ctrlr)
|
|
pointer to a callback function for performing a reset on the device,
|
|
releasing all registered applications
|
|
|
|
void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
|
|
capi_register_params *rparam)
|
|
void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
|
|
pointers to callback functions for registration and deregistration of
|
|
applications with the device
|
|
|
|
u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
|
|
pointer to a callback function for sending a CAPI message to the
|
|
device
|
|
|
|
char *(*procinfo)(struct capi_ctr *ctrlr)
|
|
pointer to a callback function returning the entry for the device in
|
|
the CAPI controller info table, /proc/capi/controller
|
|
|
|
read_proc_t *ctr_read_proc
|
|
pointer to the read_proc callback function for the device's proc file
|
|
system entry, /proc/capi/controllers/<n>; will be called with a
|
|
pointer to the device's capi_ctr structure as the last (data) argument
|
|
|
|
- to be filled in before calling capi_ctr_ready():
|
|
|
|
u8 manu[CAPI_MANUFACTURER_LEN]
|
|
value to return for CAPI_GET_MANUFACTURER
|
|
|
|
capi_version version
|
|
value to return for CAPI_GET_VERSION
|
|
|
|
capi_profile profile
|
|
value to return for CAPI_GET_PROFILE
|
|
|
|
u8 serial[CAPI_SERIAL_LEN]
|
|
value to return for CAPI_GET_SERIAL
|
|
|
|
|
|
5. Lower Layer Interface Functions
|
|
|
|
(declared in <linux/isdn/capilli.h>)
|
|
|
|
void register_capi_driver(struct capi_driver *drvr)
|
|
void unregister_capi_driver(struct capi_driver *drvr)
|
|
register/unregister a driver with Kernel CAPI
|
|
|
|
int attach_capi_ctr(struct capi_ctr *ctrlr)
|
|
int detach_capi_ctr(struct capi_ctr *ctrlr)
|
|
register/unregister a device (controller) with Kernel CAPI
|
|
|
|
void capi_ctr_ready(struct capi_ctr *ctrlr)
|
|
void capi_ctr_reseted(struct capi_ctr *ctrlr)
|
|
signal controller ready/not ready
|
|
|
|
void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
|
|
void capi_ctr_resume_output(struct capi_ctr *ctrlr)
|
|
signal suspend/resume
|
|
|
|
void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
|
|
struct sk_buff *skb)
|
|
pass a received CAPI message to Kernel CAPI
|
|
for forwarding to the specified application
|
|
|
|
|
|
6. Helper Functions and Macros
|
|
|
|
Library functions (from <linux/isdn/capilli.h>):
|
|
|
|
void capilib_new_ncci(struct list_head *head, u16 applid,
|
|
u32 ncci, u32 winsize)
|
|
void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
|
|
void capilib_release_appl(struct list_head *head, u16 applid)
|
|
void capilib_release(struct list_head *head)
|
|
void capilib_data_b3_conf(struct list_head *head, u16 applid,
|
|
u32 ncci, u16 msgid)
|
|
u16 capilib_data_b3_req(struct list_head *head, u16 applid,
|
|
u32 ncci, u16 msgid)
|
|
|
|
|
|
Macros to extract/set element values from/in a CAPI message header
|
|
(from <linux/isdn/capiutil.h>):
|
|
|
|
Get Macro Set Macro Element (Type)
|
|
|
|
CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16)
|
|
CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16)
|
|
CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8)
|
|
CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8)
|
|
CAPIMSG_CMD(m) - Command*256
|
|
+ Subcommand (u16)
|
|
CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16)
|
|
|
|
CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI
|
|
(u32)
|
|
CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16)
|
|
|