linux/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
Daniel T. Lee 6e32a74a6f samples: pktgen: allow to specify destination port
Currently, kernel pktgen has the feature to specify udp destination port
for sending packet. (e.g. pgset "udp_dst_min 9")

But on samples, each of the scripts doesn't have any option to achieve this.

This commit adds the DST_PORT option to specify the target port(s) in the script.

    -p : ($DST_PORT)  destination PORT range (e.g. 433-444) is also allowed

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 11:02:20 -07:00

101 lines
3.0 KiB
Bash
Executable File

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Benchmark script:
# - developed for benchmarking ingress qdisc path
#
# Script for injecting packets into RX path of the stack with pktgen
# "xmit_mode netif_receive". With an invalid dst_mac this will only
# measure the ingress code path as packets gets dropped in ip_rcv().
#
# This script don't really need any hardware. It benchmarks software
# RX path just after NIC driver level. With bursting is also
# "removes" the SKB alloc/free overhead.
#
# Setup scenarios for measuring ingress qdisc (with invalid dst_mac):
# ------------------------------------------------------------------
# (1) no ingress (uses static_key_false(&ingress_needed))
#
# (2) ingress on other dev (change ingress_needed and calls
# handle_ing() but exit early)
#
# config: tc qdisc add dev $SOMEDEV handle ffff: ingress
#
# (3) ingress on this dev, handle_ing() -> tc_classify()
#
# config: tc qdisc add dev $DEV handle ffff: ingress
#
# (4) ingress on this dev + drop at u32 classifier/action.
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"
# Parameter parsing via include
source ${basedir}/parameters.sh
# Using invalid DST_MAC will cause the packets to get dropped in
# ip_rcv() which is part of the test
if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$BURST" ] && BURST=1024
[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
if [ -n "$DST_PORT" ]; then
read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
validate_ports $DST_MIN $DST_MAX
fi
# Base Config
DELAY="0" # Zero means max speed
# General cleanup everything since last run
pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
# The device name is extended with @name, using thread number to
# make then unique, but any name will do.
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Base config of dev
pg_set $dev "flag QUEUE_MAP_CPU"
pg_set $dev "count $COUNT"
pg_set $dev "pkt_size $PKT_SIZE"
pg_set $dev "delay $DELAY"
pg_set $dev "flag NO_TIMESTAMP"
# Destination
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
if [ -n "$DST_PORT" ]; then
# Single destination port or random port range
pg_set $dev "flag UDPDST_RND"
pg_set $dev "udp_dst_min $DST_MIN"
pg_set $dev "udp_dst_max $DST_MAX"
fi
# Inject packet into RX path of stack
pg_set $dev "xmit_mode netif_receive"
# Burst allow us to avoid measuring SKB alloc/free overhead
pg_set $dev "burst $BURST"
done
# start_run
echo "Running... ctrl^C to stop" >&2
pg_ctrl "start"
echo "Done" >&2
# Print results
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
echo "Device: $dev"
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
done