forked from Minki/linux
cb15dff479
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
423 lines
12 KiB
C
423 lines
12 KiB
C
/*
|
|
* arch/arm/mach-kirkwood/netxbig_v2-setup.c
|
|
*
|
|
* LaCie 2Big and 5Big Network v2 board setup
|
|
*
|
|
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/leds.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/kirkwood.h>
|
|
#include <mach/leds-netxbig.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
#include "lacie_v2-common.h"
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
|
|
static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* SATA
|
|
****************************************************************************/
|
|
|
|
static struct mv_sata_platform_data netxbig_v2_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* GPIO keys
|
|
****************************************************************************/
|
|
|
|
#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13
|
|
#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15
|
|
#define NETXBIG_V2_GPIO_FUNC_BUTTON 34
|
|
|
|
#define NETXBIG_V2_SWITCH_POWER_ON 0x1
|
|
#define NETXBIG_V2_SWITCH_POWER_OFF 0x2
|
|
|
|
static struct gpio_keys_button netxbig_v2_buttons[] = {
|
|
[0] = {
|
|
.type = EV_SW,
|
|
.code = NETXBIG_V2_SWITCH_POWER_ON,
|
|
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
|
|
.desc = "Back power switch (on|auto)",
|
|
.active_low = 1,
|
|
},
|
|
[1] = {
|
|
.type = EV_SW,
|
|
.code = NETXBIG_V2_SWITCH_POWER_OFF,
|
|
.gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
|
|
.desc = "Back power switch (auto|off)",
|
|
.active_low = 1,
|
|
},
|
|
[2] = {
|
|
.code = KEY_OPTION,
|
|
.gpio = NETXBIG_V2_GPIO_FUNC_BUTTON,
|
|
.desc = "Function button",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data netxbig_v2_button_data = {
|
|
.buttons = netxbig_v2_buttons,
|
|
.nbuttons = ARRAY_SIZE(netxbig_v2_buttons),
|
|
};
|
|
|
|
static struct platform_device netxbig_v2_gpio_buttons = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &netxbig_v2_button_data,
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* GPIO extension LEDs
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* The LEDs are controlled by a CPLD and can be configured through a GPIO
|
|
* extension bus:
|
|
*
|
|
* - address register : bit [0-2] -> GPIO [47-49]
|
|
* - data register : bit [0-2] -> GPIO [44-46]
|
|
* - enable register : GPIO 29
|
|
*/
|
|
|
|
static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
|
|
static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
|
|
|
|
static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
|
|
.addr = netxbig_v2_gpio_ext_addr,
|
|
.num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
|
|
.data = netxbig_v2_gpio_ext_data,
|
|
.num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
|
|
.enable = 29,
|
|
};
|
|
|
|
/*
|
|
* Address register selection:
|
|
*
|
|
* addr | register
|
|
* ----------------------------
|
|
* 0 | front LED
|
|
* 1 | front LED brightness
|
|
* 2 | SATA LED brightness
|
|
* 3 | SATA0 LED
|
|
* 4 | SATA1 LED
|
|
* 5 | SATA2 LED
|
|
* 6 | SATA3 LED
|
|
* 7 | SATA4 LED
|
|
*
|
|
* Data register configuration:
|
|
*
|
|
* data | LED brightness
|
|
* -------------------------------------------------
|
|
* 0 | min (off)
|
|
* - | -
|
|
* 7 | max
|
|
*
|
|
* data | front LED mode
|
|
* -------------------------------------------------
|
|
* 0 | fix off
|
|
* 1 | fix blue on
|
|
* 2 | fix red on
|
|
* 3 | blink blue on=1 sec and blue off=1 sec
|
|
* 4 | blink red on=1 sec and red off=1 sec
|
|
* 5 | blink blue on=2.5 sec and red on=0.5 sec
|
|
* 6 | blink blue on=1 sec and red on=1 sec
|
|
* 7 | blink blue on=0.5 sec and blue off=2.5 sec
|
|
*
|
|
* data | SATA LED mode
|
|
* -------------------------------------------------
|
|
* 0 | fix off
|
|
* 1 | SATA activity blink
|
|
* 2 | fix red on
|
|
* 3 | blink blue on=1 sec and blue off=1 sec
|
|
* 4 | blink red on=1 sec and red off=1 sec
|
|
* 5 | blink blue on=2.5 sec and red on=0.5 sec
|
|
* 6 | blink blue on=1 sec and red on=1 sec
|
|
* 7 | fix blue on
|
|
*/
|
|
|
|
static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
|
|
[NETXBIG_LED_OFF] = 0,
|
|
[NETXBIG_LED_ON] = 2,
|
|
[NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
|
|
[NETXBIG_LED_TIMER1] = 4,
|
|
[NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
|
|
};
|
|
|
|
static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
|
|
[NETXBIG_LED_OFF] = 0,
|
|
[NETXBIG_LED_ON] = 1,
|
|
[NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
|
|
[NETXBIG_LED_TIMER1] = 3,
|
|
[NETXBIG_LED_TIMER2] = 7,
|
|
};
|
|
|
|
static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
|
|
[NETXBIG_LED_OFF] = 0,
|
|
[NETXBIG_LED_ON] = 7,
|
|
[NETXBIG_LED_SATA] = 1,
|
|
[NETXBIG_LED_TIMER1] = 3,
|
|
[NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
|
|
};
|
|
|
|
static struct netxbig_led_timer netxbig_v2_led_timer[] = {
|
|
[0] = {
|
|
.delay_on = 500,
|
|
.delay_off = 500,
|
|
.mode = NETXBIG_LED_TIMER1,
|
|
},
|
|
[1] = {
|
|
.delay_on = 500,
|
|
.delay_off = 1000,
|
|
.mode = NETXBIG_LED_TIMER2,
|
|
},
|
|
};
|
|
|
|
#define NETXBIG_LED(_name, maddr, mval, baddr) \
|
|
{ .name = _name, \
|
|
.mode_addr = maddr, \
|
|
.mode_val = mval, \
|
|
.bright_addr = baddr }
|
|
|
|
static struct netxbig_led net2big_v2_leds_ctrl[] = {
|
|
NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
|
|
NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
|
|
NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
|
|
NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
|
|
};
|
|
|
|
static struct netxbig_led_platform_data net2big_v2_leds_data = {
|
|
.gpio_ext = &netxbig_v2_gpio_ext,
|
|
.timer = netxbig_v2_led_timer,
|
|
.num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
|
|
.leds = net2big_v2_leds_ctrl,
|
|
.num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
|
|
};
|
|
|
|
static struct netxbig_led net5big_v2_leds_ctrl[] = {
|
|
NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
|
|
NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
|
|
NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
|
|
NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
|
|
NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
|
|
NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
|
|
NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
|
|
NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2),
|
|
};
|
|
|
|
static struct netxbig_led_platform_data net5big_v2_leds_data = {
|
|
.gpio_ext = &netxbig_v2_gpio_ext,
|
|
.timer = netxbig_v2_led_timer,
|
|
.num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
|
|
.leds = net5big_v2_leds_ctrl,
|
|
.num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
|
|
};
|
|
|
|
static struct platform_device netxbig_v2_leds = {
|
|
.name = "leds-netxbig",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &net2big_v2_leds_data,
|
|
},
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
|
|
static unsigned int net2big_v2_mpp_config[] __initdata = {
|
|
MPP0_SPI_SCn,
|
|
MPP1_SPI_MOSI,
|
|
MPP2_SPI_SCK,
|
|
MPP3_SPI_MISO,
|
|
MPP6_SYSRST_OUTn,
|
|
MPP7_GPO, /* Request power-off */
|
|
MPP8_TW0_SDA,
|
|
MPP9_TW0_SCK,
|
|
MPP10_UART0_TXD,
|
|
MPP11_UART0_RXD,
|
|
MPP13_GPIO, /* Rear power switch (on|auto) */
|
|
MPP14_GPIO, /* USB fuse alarm */
|
|
MPP15_GPIO, /* Rear power switch (auto|off) */
|
|
MPP16_GPIO, /* SATA HDD1 power */
|
|
MPP17_GPIO, /* SATA HDD2 power */
|
|
MPP20_SATA1_ACTn,
|
|
MPP21_SATA0_ACTn,
|
|
MPP24_GPIO, /* USB mode select */
|
|
MPP26_GPIO, /* USB device vbus */
|
|
MPP28_GPIO, /* USB enable host vbus */
|
|
MPP29_GPIO, /* GPIO extension ALE */
|
|
MPP34_GPIO, /* Rear Push button */
|
|
MPP35_GPIO, /* Inhibit switch power-off */
|
|
MPP36_GPIO, /* SATA HDD1 presence */
|
|
MPP37_GPIO, /* SATA HDD2 presence */
|
|
MPP40_GPIO, /* eSATA presence */
|
|
MPP44_GPIO, /* GPIO extension (data 0) */
|
|
MPP45_GPIO, /* GPIO extension (data 1) */
|
|
MPP46_GPIO, /* GPIO extension (data 2) */
|
|
MPP47_GPIO, /* GPIO extension (addr 0) */
|
|
MPP48_GPIO, /* GPIO extension (addr 1) */
|
|
MPP49_GPIO, /* GPIO extension (addr 2) */
|
|
0
|
|
};
|
|
|
|
static unsigned int net5big_v2_mpp_config[] __initdata = {
|
|
MPP0_SPI_SCn,
|
|
MPP1_SPI_MOSI,
|
|
MPP2_SPI_SCK,
|
|
MPP3_SPI_MISO,
|
|
MPP6_SYSRST_OUTn,
|
|
MPP7_GPO, /* Request power-off */
|
|
MPP8_TW0_SDA,
|
|
MPP9_TW0_SCK,
|
|
MPP10_UART0_TXD,
|
|
MPP11_UART0_RXD,
|
|
MPP13_GPIO, /* Rear power switch (on|auto) */
|
|
MPP14_GPIO, /* USB fuse alarm */
|
|
MPP15_GPIO, /* Rear power switch (auto|off) */
|
|
MPP16_GPIO, /* SATA HDD1 power */
|
|
MPP17_GPIO, /* SATA HDD2 power */
|
|
MPP20_GE1_TXD0,
|
|
MPP21_GE1_TXD1,
|
|
MPP22_GE1_TXD2,
|
|
MPP23_GE1_TXD3,
|
|
MPP24_GE1_RXD0,
|
|
MPP25_GE1_RXD1,
|
|
MPP26_GE1_RXD2,
|
|
MPP27_GE1_RXD3,
|
|
MPP28_GPIO, /* USB enable host vbus */
|
|
MPP29_GPIO, /* GPIO extension ALE */
|
|
MPP30_GE1_RXCTL,
|
|
MPP31_GE1_RXCLK,
|
|
MPP32_GE1_TCLKOUT,
|
|
MPP33_GE1_TXCTL,
|
|
MPP34_GPIO, /* Rear Push button */
|
|
MPP35_GPIO, /* Inhibit switch power-off */
|
|
MPP36_GPIO, /* SATA HDD1 presence */
|
|
MPP37_GPIO, /* SATA HDD2 presence */
|
|
MPP38_GPIO, /* SATA HDD3 presence */
|
|
MPP39_GPIO, /* SATA HDD4 presence */
|
|
MPP40_GPIO, /* SATA HDD5 presence */
|
|
MPP41_GPIO, /* SATA HDD3 power */
|
|
MPP42_GPIO, /* SATA HDD4 power */
|
|
MPP43_GPIO, /* SATA HDD5 power */
|
|
MPP44_GPIO, /* GPIO extension (data 0) */
|
|
MPP45_GPIO, /* GPIO extension (data 1) */
|
|
MPP46_GPIO, /* GPIO extension (data 2) */
|
|
MPP47_GPIO, /* GPIO extension (addr 0) */
|
|
MPP48_GPIO, /* GPIO extension (addr 1) */
|
|
MPP49_GPIO, /* GPIO extension (addr 2) */
|
|
0
|
|
};
|
|
|
|
#define NETXBIG_V2_GPIO_POWER_OFF 7
|
|
|
|
static void netxbig_v2_power_off(void)
|
|
{
|
|
gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
|
|
}
|
|
|
|
static void __init netxbig_v2_init(void)
|
|
{
|
|
/*
|
|
* Basic setup. Needs to be called early.
|
|
*/
|
|
kirkwood_init();
|
|
if (machine_is_net2big_v2())
|
|
kirkwood_mpp_conf(net2big_v2_mpp_config);
|
|
else
|
|
kirkwood_mpp_conf(net5big_v2_mpp_config);
|
|
|
|
if (machine_is_net2big_v2())
|
|
lacie_v2_hdd_power_init(2);
|
|
else
|
|
lacie_v2_hdd_power_init(5);
|
|
|
|
kirkwood_ehci_init();
|
|
kirkwood_ge00_init(&netxbig_v2_ge00_data);
|
|
if (machine_is_net5big_v2())
|
|
kirkwood_ge01_init(&netxbig_v2_ge01_data);
|
|
kirkwood_sata_init(&netxbig_v2_sata_data);
|
|
kirkwood_uart0_init();
|
|
lacie_v2_register_flash();
|
|
lacie_v2_register_i2c_devices();
|
|
|
|
if (machine_is_net5big_v2())
|
|
netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
|
|
platform_device_register(&netxbig_v2_leds);
|
|
platform_device_register(&netxbig_v2_gpio_buttons);
|
|
|
|
if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
|
|
gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
|
|
pm_power_off = netxbig_v2_power_off;
|
|
else
|
|
pr_err("netxbig_v2: failed to configure power-off GPIO\n");
|
|
}
|
|
|
|
#ifdef CONFIG_MACH_NET2BIG_V2
|
|
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
|
|
.atag_offset = 0x100,
|
|
.init_machine = netxbig_v2_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_early = kirkwood_init_early,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
.restart = kirkwood_restart,
|
|
MACHINE_END
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_NET5BIG_V2
|
|
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
|
|
.atag_offset = 0x100,
|
|
.init_machine = netxbig_v2_init,
|
|
.map_io = kirkwood_map_io,
|
|
.init_early = kirkwood_init_early,
|
|
.init_irq = kirkwood_init_irq,
|
|
.timer = &kirkwood_timer,
|
|
.restart = kirkwood_restart,
|
|
MACHINE_END
|
|
#endif
|