linux/arch/powerpc/kernel/Makefile
Grant Likely fbe6544719 powerpc/pci: move pci_64.c device tree scanning code into pci-common.c
The PCI device tree scanning code in pci_64.c is some useful functionality.
It allows PCI devices to be described in the device tree instead of being
probed for, which in turn allows pci devices to use all of the device tree
facilities to describe complex PCI bus architectures like GPIO and IRQ
routing (perhaps not a common situation for desktop or server systems,
but useful for embedded systems with on-board PCI devices).

This patch moves the device tree scanning into pci-common.c so it is
available for 32-bit powerpc machines too.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:15 +10:00

151 lines
4.8 KiB
Makefile

#
# Makefile for the linux kernel.
#
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ifeq ($(CONFIG_PPC64),y)
CFLAGS_prom_init.o += -mno-minimal-toc
endif
ifeq ($(CONFIG_PPC32),y)
CFLAGS_prom_init.o += -fPIC
CFLAGS_btext.o += -fPIC
endif
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
# do not trace tracer code
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
# timers used by tracing
CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
endif
obj-y := cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
init_task.o process.o systbl.o idle.o \
signal.o sysfs.o cacheinfo.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_E500) += idle_e500.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
swsusp_$(CONFIG_WORD_SIZE).o
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o
extra-y := head_$(CONFIG_WORD_SIZE).o
extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o
extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
obj-y += time.o prom.o traps.o setup-common.o \
udbg.o misc.o io.o dma.o \
misc_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o perf_callchain.o
obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \
power5+-pmu.o power6-pmu.o power7-pmu.o
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
obj-y += iomap.o
endif
obj-$(CONFIG_PPC64) += $(obj64-y)
obj-$(CONFIG_PPC32) += $(obj32-y)
ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
# Disable GCOV in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
GCOV_PROFILE_ftrace.o := n
GCOV_PROFILE_machine_kexec_64.o := n
GCOV_PROFILE_machine_kexec_32.o := n
GCOV_PROFILE_kprobes.o := n
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_ALTIVEC) += vector.o
extra-$(CONFIG_PPC64) += entry_64.o
extra-y += systbl_chk.i
$(obj)/systbl.o: systbl_chk
quiet_cmd_systbl_chk = CALL $<
cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
endif
clean-files := vmlinux.lds