forked from Minki/linux
d95ab6d2af
Ordered with the smallest number at the top. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220427075212.3409407-1-gengcixi@gmail.com
281 lines
6.9 KiB
C
281 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2017 Spreadtrum Communications Inc.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/sc27xx-pmic.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <uapi/linux/usb/charger.h>
|
|
|
|
#define SPRD_PMIC_INT_MASK_STATUS 0x0
|
|
#define SPRD_PMIC_INT_RAW_STATUS 0x4
|
|
#define SPRD_PMIC_INT_EN 0x8
|
|
|
|
#define SPRD_SC2730_IRQ_BASE 0x80
|
|
#define SPRD_SC2730_IRQ_NUMS 10
|
|
#define SPRD_SC2730_CHG_DET 0x1b9c
|
|
#define SPRD_SC2731_IRQ_BASE 0x140
|
|
#define SPRD_SC2731_IRQ_NUMS 16
|
|
#define SPRD_SC2731_CHG_DET 0xedc
|
|
|
|
/* PMIC charger detection definition */
|
|
#define SPRD_PMIC_CHG_DET_DELAY_US 200000
|
|
#define SPRD_PMIC_CHG_DET_TIMEOUT 2000000
|
|
#define SPRD_PMIC_CHG_DET_DONE BIT(11)
|
|
#define SPRD_PMIC_SDP_TYPE BIT(7)
|
|
#define SPRD_PMIC_DCP_TYPE BIT(6)
|
|
#define SPRD_PMIC_CDP_TYPE BIT(5)
|
|
#define SPRD_PMIC_CHG_TYPE_MASK GENMASK(7, 5)
|
|
|
|
struct sprd_pmic {
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
struct regmap_irq *irqs;
|
|
struct regmap_irq_chip irq_chip;
|
|
struct regmap_irq_chip_data *irq_data;
|
|
const struct sprd_pmic_data *pdata;
|
|
int irq;
|
|
};
|
|
|
|
struct sprd_pmic_data {
|
|
u32 irq_base;
|
|
u32 num_irqs;
|
|
u32 charger_det;
|
|
};
|
|
|
|
/*
|
|
* Since different PMICs of SC27xx series can have different interrupt
|
|
* base address and irq number, we should save irq number and irq base
|
|
* in the device data structure.
|
|
*/
|
|
static const struct sprd_pmic_data sc2730_data = {
|
|
.irq_base = SPRD_SC2730_IRQ_BASE,
|
|
.num_irqs = SPRD_SC2730_IRQ_NUMS,
|
|
.charger_det = SPRD_SC2730_CHG_DET,
|
|
};
|
|
|
|
static const struct sprd_pmic_data sc2731_data = {
|
|
.irq_base = SPRD_SC2731_IRQ_BASE,
|
|
.num_irqs = SPRD_SC2731_IRQ_NUMS,
|
|
.charger_det = SPRD_SC2731_CHG_DET,
|
|
};
|
|
|
|
enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct sprd_pmic *ddata = spi_get_drvdata(spi);
|
|
const struct sprd_pmic_data *pdata = ddata->pdata;
|
|
enum usb_charger_type type;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val,
|
|
(val & SPRD_PMIC_CHG_DET_DONE),
|
|
SPRD_PMIC_CHG_DET_DELAY_US,
|
|
SPRD_PMIC_CHG_DET_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "failed to detect charger type\n");
|
|
return UNKNOWN_TYPE;
|
|
}
|
|
|
|
switch (val & SPRD_PMIC_CHG_TYPE_MASK) {
|
|
case SPRD_PMIC_CDP_TYPE:
|
|
type = CDP_TYPE;
|
|
break;
|
|
case SPRD_PMIC_DCP_TYPE:
|
|
type = DCP_TYPE;
|
|
break;
|
|
case SPRD_PMIC_SDP_TYPE:
|
|
type = SDP_TYPE;
|
|
break;
|
|
default:
|
|
type = UNKNOWN_TYPE;
|
|
break;
|
|
}
|
|
|
|
return type;
|
|
}
|
|
EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type);
|
|
|
|
static int sprd_pmic_spi_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct device *dev = context;
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
|
|
return spi_write(spi, data, count);
|
|
}
|
|
|
|
static int sprd_pmic_spi_read(void *context,
|
|
const void *reg, size_t reg_size,
|
|
void *val, size_t val_size)
|
|
{
|
|
struct device *dev = context;
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
u32 rx_buf[2] = { 0 };
|
|
int ret;
|
|
|
|
/* Now we only support one PMIC register to read every time. */
|
|
if (reg_size != sizeof(u32) || val_size != sizeof(u32))
|
|
return -EINVAL;
|
|
|
|
/* Copy address to read from into first element of SPI buffer. */
|
|
memcpy(rx_buf, reg, sizeof(u32));
|
|
ret = spi_read(spi, rx_buf, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
memcpy(val, rx_buf, val_size);
|
|
return 0;
|
|
}
|
|
|
|
static struct regmap_bus sprd_pmic_regmap = {
|
|
.write = sprd_pmic_spi_write,
|
|
.read = sprd_pmic_spi_read,
|
|
.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
|
|
.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
|
|
};
|
|
|
|
static const struct regmap_config sprd_pmic_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0xffff,
|
|
};
|
|
|
|
static int sprd_pmic_probe(struct spi_device *spi)
|
|
{
|
|
struct sprd_pmic *ddata;
|
|
const struct sprd_pmic_data *pdata;
|
|
int ret, i;
|
|
|
|
pdata = of_device_get_match_data(&spi->dev);
|
|
if (!pdata) {
|
|
dev_err(&spi->dev, "No matching driver data found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (!ddata)
|
|
return -ENOMEM;
|
|
|
|
ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap,
|
|
&spi->dev, &sprd_pmic_config);
|
|
if (IS_ERR(ddata->regmap)) {
|
|
ret = PTR_ERR(ddata->regmap);
|
|
dev_err(&spi->dev, "Failed to allocate register map %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
spi_set_drvdata(spi, ddata);
|
|
ddata->dev = &spi->dev;
|
|
ddata->irq = spi->irq;
|
|
ddata->pdata = pdata;
|
|
|
|
ddata->irq_chip.name = dev_name(&spi->dev);
|
|
ddata->irq_chip.status_base =
|
|
pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS;
|
|
ddata->irq_chip.mask_base = pdata->irq_base + SPRD_PMIC_INT_EN;
|
|
ddata->irq_chip.ack_base = 0;
|
|
ddata->irq_chip.num_regs = 1;
|
|
ddata->irq_chip.num_irqs = pdata->num_irqs;
|
|
ddata->irq_chip.mask_invert = true;
|
|
|
|
ddata->irqs = devm_kcalloc(&spi->dev,
|
|
pdata->num_irqs, sizeof(struct regmap_irq),
|
|
GFP_KERNEL);
|
|
if (!ddata->irqs)
|
|
return -ENOMEM;
|
|
|
|
ddata->irq_chip.irqs = ddata->irqs;
|
|
for (i = 0; i < pdata->num_irqs; i++)
|
|
ddata->irqs[i].mask = BIT(i);
|
|
|
|
ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
|
|
IRQF_ONESHOT, 0,
|
|
&ddata->irq_chip, &ddata->irq_data);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_of_platform_populate(&spi->dev);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
device_init_wakeup(&spi->dev, true);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sprd_pmic_suspend(struct device *dev)
|
|
{
|
|
struct sprd_pmic *ddata = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(ddata->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sprd_pmic_resume(struct device *dev)
|
|
{
|
|
struct sprd_pmic *ddata = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(ddata->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume);
|
|
|
|
static const struct of_device_id sprd_pmic_match[] = {
|
|
{ .compatible = "sprd,sc2730", .data = &sc2730_data },
|
|
{ .compatible = "sprd,sc2731", .data = &sc2731_data },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sprd_pmic_match);
|
|
|
|
static const struct spi_device_id sprd_pmic_spi_ids[] = {
|
|
{ .name = "sc2730", .driver_data = (unsigned long)&sc2730_data },
|
|
{ .name = "sc2731", .driver_data = (unsigned long)&sc2731_data },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, sprd_pmic_spi_ids);
|
|
|
|
static struct spi_driver sprd_pmic_driver = {
|
|
.driver = {
|
|
.name = "sc27xx-pmic",
|
|
.of_match_table = sprd_pmic_match,
|
|
.pm = &sprd_pmic_pm_ops,
|
|
},
|
|
.probe = sprd_pmic_probe,
|
|
.id_table = sprd_pmic_spi_ids,
|
|
};
|
|
|
|
static int __init sprd_pmic_init(void)
|
|
{
|
|
return spi_register_driver(&sprd_pmic_driver);
|
|
}
|
|
subsys_initcall(sprd_pmic_init);
|
|
|
|
static void __exit sprd_pmic_exit(void)
|
|
{
|
|
spi_unregister_driver(&sprd_pmic_driver);
|
|
}
|
|
module_exit(sprd_pmic_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver");
|
|
MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
|