linux/arch/mips/sni/rm200.c
Thomas Bogendoerfer 9815778ae0 [MIPS] RM: Use only phyiscal address for 82596 and 53c710
Use physical address for 82596 and 53c710 base address

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:08 +01:00

199 lines
4.3 KiB
C

/*
* RM200 specific code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/sni.h>
#include <asm/time.h>
#include <asm/irq_cpu.h>
#define PORT(_base,_irq) \
{ \
.iobase = _base, \
.irq = _irq, \
.uartclk = 1843200, \
.iotype = UPIO_PORT, \
.flags = UPF_BOOT_AUTOCONF, \
}
static struct plat_serial8250_port rm200_data[] = {
PORT(0x3f8, 4),
PORT(0x2f8, 3),
{ },
};
static struct platform_device rm200_serial8250_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = rm200_data,
},
};
static struct resource rm200_ds1216_rsrc[] = {
{
.start = 0x1cd41ffc,
.end = 0x1cd41fff,
.flags = IORESOURCE_MEM
}
};
static struct platform_device rm200_ds1216_device = {
.name = "rtc-ds1216",
.num_resources = ARRAY_SIZE(rm200_ds1216_rsrc),
.resource = rm200_ds1216_rsrc
};
static struct resource snirm_82596_rm200_rsrc[] = {
{
.start = 0x18000000,
.end = 0x180fffff,
.flags = IORESOURCE_MEM
},
{
.start = 0x1b000000,
.end = 0x1b000004,
.flags = IORESOURCE_MEM
},
{
.start = 0x1ff00000,
.end = 0x1ff00020,
.flags = IORESOURCE_MEM
},
{
.start = 27,
.end = 27,
.flags = IORESOURCE_IRQ
},
{
.flags = 0x00
}
};
static struct platform_device snirm_82596_rm200_pdev = {
.name = "snirm_82596",
.num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc),
.resource = snirm_82596_rm200_rsrc
};
static struct resource snirm_53c710_rm200_rsrc[] = {
{
.start = 0x19000000,
.end = 0x190fffff,
.flags = IORESOURCE_MEM
},
{
.start = 26,
.end = 26,
.flags = IORESOURCE_IRQ
}
};
static struct platform_device snirm_53c710_rm200_pdev = {
.name = "snirm_53c710",
.num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
.resource = snirm_53c710_rm200_rsrc
};
static int __init snirm_setup_devinit(void)
{
if (sni_brd_type == SNI_BRD_RM200) {
platform_device_register(&rm200_serial8250_device);
platform_device_register(&rm200_ds1216_device);
platform_device_register(&snirm_82596_rm200_pdev);
platform_device_register(&snirm_53c710_rm200_pdev);
}
return 0;
}
device_initcall(snirm_setup_devinit);
#define SNI_RM200_INT_STAT_REG 0xbc000000
#define SNI_RM200_INT_ENA_REG 0xbc080000
#define SNI_RM200_INT_START 24
#define SNI_RM200_INT_END 28
static void enable_rm200_irq(unsigned int irq)
{
unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
*(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
}
void disable_rm200_irq(unsigned int irq)
{
unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
*(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
}
void end_rm200_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_rm200_irq(irq);
}
static struct irq_chip rm200_irq_type = {
.typename = "RM200",
.ack = disable_rm200_irq,
.mask = disable_rm200_irq,
.mask_ack = disable_rm200_irq,
.unmask = enable_rm200_irq,
.end = end_rm200_irq,
};
static void sni_rm200_hwint(void)
{
u32 pending = read_c0_cause() & read_c0_status();
u8 mask;
u8 stat;
int irq;
if (pending & C_IRQ5)
do_IRQ (MIPS_CPU_IRQ_BASE + 7);
else if (pending & C_IRQ0) {
clear_c0_status (IE_IRQ0);
mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
irq = ffs(stat & mask & 0x1f);
if (likely(irq > 0))
do_IRQ (irq + SNI_RM200_INT_START - 1);
set_c0_status (IE_IRQ0);
}
}
void __init sni_rm200_irq_init(void)
{
int i;
* (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
mips_cpu_irq_init();
/* Actually we've got more interrupts to handle ... */
for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
set_irq_chip(i, &rm200_irq_type);
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq);
}
void __init sni_rm200_init(void)
{
set_io_port_base(SNI_PORT_BASE + 0x02000000);
ioport_resource.end += 0x02000000;
board_time_init = sni_cpu_time_init;
}