forked from Minki/linux
dde3b0d64c
With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label. This patch changes UART numbering as per TRM, as uart0-5. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
267 lines
5.3 KiB
Plaintext
267 lines
5.3 KiB
Plaintext
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
/include/ "am33xx.dtsi"
|
|
|
|
/ {
|
|
model = "TI AM335x EVM";
|
|
compatible = "ti,am335x-evm", "ti,am33xx";
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vdd1_reg>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
am33xx_pinmux: pinmux@44e10800 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
|
|
|
|
matrix_keypad_s0: matrix_keypad_s0 {
|
|
pinctrl-single,pins = <
|
|
0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
|
|
0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
|
|
0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
|
|
0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
|
|
0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
|
|
>;
|
|
};
|
|
|
|
volume_keys_s0: volume_keys_s0 {
|
|
pinctrl-single,pins = <
|
|
0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
|
|
0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 0x30 /* i2c0_sda.i2c0_sda PULLUP | INPUTENABLE | MODE0 */
|
|
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0x158 0x32 /* spi0_d1.i2c1_sda PULLUP | INPUTENABLE | MODE2 */
|
|
0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ocp {
|
|
uart0: serial@44e09000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c0: i2c@44e0b000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps: tps@2d {
|
|
reg = <0x2d>;
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@4802a000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
lis331dlh: lis331dlh@18 {
|
|
compatible = "st,lis331dlh", "st,lis3lv02d";
|
|
reg = <0x18>;
|
|
Vdd-supply = <&lis3_reg>;
|
|
Vdd_IO-supply = <&lis3_reg>;
|
|
|
|
st,click-single-x;
|
|
st,click-single-y;
|
|
st,click-single-z;
|
|
st,click-thresh-x = <10>;
|
|
st,click-thresh-y = <10>;
|
|
st,click-thresh-z = <10>;
|
|
st,irq1-click;
|
|
st,irq2-click;
|
|
st,wakeup-x-lo;
|
|
st,wakeup-x-hi;
|
|
st,wakeup-y-lo;
|
|
st,wakeup-y-hi;
|
|
st,wakeup-z-lo;
|
|
st,wakeup-z-hi;
|
|
st,min-limit-x = <120>;
|
|
st,min-limit-y = <120>;
|
|
st,min-limit-z = <140>;
|
|
st,max-limit-x = <550>;
|
|
st,max-limit-y = <550>;
|
|
st,max-limit-z = <750>;
|
|
};
|
|
|
|
tsl2550: tsl2550@39 {
|
|
compatible = "taos,tsl2550";
|
|
reg = <0x39>;
|
|
};
|
|
|
|
tmp275: tmp275@48 {
|
|
compatible = "ti,tmp275";
|
|
reg = <0x48>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vbat: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
lis3_reg: fixedregulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lis3_reg";
|
|
regulator-boot-on;
|
|
};
|
|
|
|
matrix_keypad: matrix_keypad@0 {
|
|
compatible = "gpio-matrix-keypad";
|
|
debounce-delay-ms = <5>;
|
|
col-scan-delay-us = <2>;
|
|
|
|
row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
|
|
&gpio1 26 0 /* Bank1, pin26 */
|
|
&gpio1 27 0>; /* Bank1, pin27 */
|
|
|
|
col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
|
|
&gpio1 22 0>; /* Bank1, pin22 */
|
|
|
|
linux,keymap = <0x0000008b /* MENU */
|
|
0x0100009e /* BACK */
|
|
0x02000069 /* LEFT */
|
|
0x0001006a /* RIGHT */
|
|
0x0101001c /* ENTER */
|
|
0x0201006c>; /* DOWN */
|
|
};
|
|
|
|
gpio_keys: volume_keys@0 {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
autorepeat;
|
|
|
|
switch@9 {
|
|
label = "volume-up";
|
|
linux,code = <115>;
|
|
gpios = <&gpio0 2 1>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
switch@10 {
|
|
label = "volume-down";
|
|
linux,code = <114>;
|
|
gpios = <&gpio0 3 1>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "tps65910.dtsi"
|
|
|
|
&tps {
|
|
vcc1-supply = <&vbat>;
|
|
vcc2-supply = <&vbat>;
|
|
vcc3-supply = <&vbat>;
|
|
vcc4-supply = <&vbat>;
|
|
vcc5-supply = <&vbat>;
|
|
vcc6-supply = <&vbat>;
|
|
vcc7-supply = <&vbat>;
|
|
vccio-supply = <&vbat>;
|
|
|
|
regulators {
|
|
vrtc_reg: regulator@0 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vio_reg: regulator@1 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd1_reg: regulator@2 {
|
|
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1312500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd2_reg: regulator@3 {
|
|
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd3_reg: regulator@4 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig1_reg: regulator@5 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig2_reg: regulator@6 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: regulator@7 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdac_reg: regulator@8 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux1_reg: regulator@9 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux2_reg: regulator@10 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux33_reg: regulator@11 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vmmc_reg: regulator@12 {
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
};
|