forked from Minki/linux
a2f8d6b303
In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
307 lines
6.0 KiB
Plaintext
307 lines
6.0 KiB
Plaintext
/*
|
|
* am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
|
|
*
|
|
* Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
|
|
/ {
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vdd1_reg>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&leds_pins>;
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
led@0 {
|
|
label = "com:green:user";
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
vbat: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vmmc: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
>;
|
|
};
|
|
|
|
nandflash_pins: pinmux_nandflash_pins {
|
|
pinctrl-single,pins = <
|
|
0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
|
0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
|
0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
|
0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
|
0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
|
0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
|
0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
|
0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
|
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
|
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
|
|
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
|
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
|
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
|
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
|
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
|
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
|
>;
|
|
};
|
|
|
|
leds_pins: pinmux_leds_pins {
|
|
pinctrl-single,pins = <
|
|
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins>;
|
|
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
|
|
nand@0,0 {
|
|
reg = <0 0 0>; /* CS0, offset 0 */
|
|
nand-bus-width = <8>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wait-on-read = "true";
|
|
gpmc,wait-on-write = "true";
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
elm_id = <&elm>;
|
|
|
|
/* MTD partition table */
|
|
partition@0 {
|
|
label = "SPL";
|
|
reg = <0x00000000 0x000080000>;
|
|
};
|
|
|
|
partition@1 {
|
|
label = "U-boot";
|
|
reg = <0x00080000 0x001e0000>;
|
|
};
|
|
|
|
partition@2 {
|
|
label = "U-Boot Env";
|
|
reg = <0x00260000 0x00020000>;
|
|
};
|
|
|
|
partition@3 {
|
|
label = "Kernel";
|
|
reg = <0x00280000 0x00500000>;
|
|
};
|
|
|
|
partition@4 {
|
|
label = "File System";
|
|
reg = <0x00780000 0x007880000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
tps: tps@2d {
|
|
reg = <0x2d>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&vmmc>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
|
|
control@44e10620 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@47401300 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb-phy@47401b00 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb@47401000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb@47401800 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
dma-controller@47402000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
#include "tps65910.dtsi"
|
|
|
|
&tps {
|
|
vcc1-supply = <&vbat>;
|
|
vcc2-supply = <&vbat>;
|
|
vcc3-supply = <&vbat>;
|
|
vcc4-supply = <&vbat>;
|
|
vcc5-supply = <&vbat>;
|
|
vcc6-supply = <&vbat>;
|
|
vcc7-supply = <&vbat>;
|
|
vccio-supply = <&vbat>;
|
|
|
|
regulators {
|
|
vrtc_reg: regulator@0 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vio_reg: regulator@1 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd1_reg: regulator@2 {
|
|
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1312500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd2_reg: regulator@3 {
|
|
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <912500>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd3_reg: regulator@4 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig1_reg: regulator@5 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig2_reg: regulator@6 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: regulator@7 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdac_reg: regulator@8 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux1_reg: regulator@9 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux2_reg: regulator@10 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vaux33_reg: regulator@11 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vmmc_reg: regulator@12 {
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|