linux/drivers/serial
Maciej W. Rozycki dbab81281d dz: always check if it is safe to console_putchar()
Polled transmission is tricky enough with the DZ11 design.  While "loop" is
set to a high value, conceptually you are not allowed to transmit without
checking whether the device offers the right transmission line (yes, it is the
device that selects the line -- the driver has no control over it other than
disabling the transmitter offered if it is the wrong one), so the loop has to
be run at least once.

Well, the '1977 or PDP11 view of how serial lines should be handled...  Except
that the serial interface used to be quite an impressive board back then
rather than chip.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
..
cpm_uart Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
jsm jsm: Remove further unneeded crud 2007-10-17 08:42:52 -07:00
8250_accent.c
8250_acorn.c [ARM] ecard: add ecardm_iomap() / ecardm_iounmap() 2007-05-11 17:19:02 +01:00
8250_au1x00.c
8250_boca.c
8250_early.c serial: fix compile warning about putc 2007-11-05 15:12:32 -08:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c serial: add early_serial_setup() back to header file 2007-07-18 08:38:22 -07:00
8250_hub6.c
8250_mca.c
8250_pci.c serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h 2008-02-05 09:44:09 -08:00
8250_pnp.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.h
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c m68knommu: use IRQF_DISABLE in m68328serial.c 2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c 68360serial: remove broken optimisation 2007-07-16 09:05:51 -07:00
amba-pl010.c [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking 2007-06-05 19:39:49 +01:00
amba-pl011.c amba-pl011, rename BIT macro 2007-10-19 11:53:42 -07:00
atmel_serial.c [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
bfin_5xx.c [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option 2008-01-22 15:29:18 +08:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
crisv10.h CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
dz.c dz: always check if it is safe to console_putchar() 2008-02-07 08:42:24 -08:00
dz.h dz.h: remove useless unused module junk 2008-02-07 08:42:24 -08:00
icom.c kobject: convert icom to use kref, not kobject 2008-01-24 20:40:09 -08:00
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c IP22ZILOG: fix lockup and sysrq 2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
m32r_sio_reg.h
m32r_sio.c m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
m32r_sio.h m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
Makefile SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
mcf.c m68knommu: use ARRAY_SIZE in ColdFire serial driver 2008-02-05 09:44:21 -08:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h
mpc52xx_uart.c [POWERPC] mpc5200: normalize compatible property bindings 2008-01-26 15:26:01 -07:00
mpsc.c serial: MPSC: set baudrate when BRG divider is set. 2008-02-05 09:44:10 -08:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c [POWERPC] of_serial: add port type checking 2007-07-10 21:53:42 +10:00
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled 2007-11-26 14:39:12 +00:00
s3c2410.c drivers/serial/s3c2410.c: remove dead config symbols 2008-02-05 09:44:09 -08:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
sc26xx.c SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
serial_core.c serial: speed setup failure reporting 2008-02-05 09:44:10 -08:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c [ARM] 4411/1: KS8695: Another serial driver fix 2007-05-30 13:15:19 +01:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial: fix serial_txx9 console initialization 2007-10-30 08:06:55 -07:00
sh-sci.c sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sh-sci.h sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SERIAL]: Fix section mismatches in Sun serial console drivers. 2007-12-29 01:19:49 -08:00
suncore.h [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunhv.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ucc_uart.c [POWERPC] qe-uart: add support for Freescale QUICCEngine UART 2008-01-23 19:34:12 -06:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c serial: fix vr41xx_siu serial console support 2007-07-31 15:39:41 -07:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00