forked from Minki/linux
a84471fe26
No code changes. Signed-off-by: Jeff Garzik <jeff@garzik.org>
390 lines
10 KiB
C
390 lines
10 KiB
C
/*
|
|
* sata_sis.c - Silicon Integrated Systems SATA
|
|
*
|
|
* Maintained by: Uwe Koziolek
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2004 Uwe Koziolek
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include "sis.h"
|
|
|
|
#define DRV_NAME "sata_sis"
|
|
#define DRV_VERSION "0.7"
|
|
|
|
enum {
|
|
sis_180 = 0,
|
|
SIS_SCR_PCI_BAR = 5,
|
|
|
|
/* PCI configuration registers */
|
|
SIS_GENCTL = 0x54, /* IDE General Control register */
|
|
SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */
|
|
SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
|
|
SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */
|
|
SIS_PMR = 0x90, /* port mapping register */
|
|
SIS_PMR_COMBINED = 0x30,
|
|
|
|
/* random bits */
|
|
SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */
|
|
|
|
GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */
|
|
};
|
|
|
|
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
|
|
static const struct pci_device_id sis_pci_tbl[] = {
|
|
{ PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
|
|
{ PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
|
|
{ PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
|
|
{ PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
|
|
{ PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
|
|
{ PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver sis_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sis_pci_tbl,
|
|
.probe = sis_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template sis_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = ATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations sis_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
.scr_read = sis_scr_read,
|
|
.scr_write = sis_scr_write,
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static struct ata_port_info sis_port_info = {
|
|
.sht = &sis_sht,
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x7,
|
|
.udma_mask = 0x7f,
|
|
.port_ops = &sis_ops,
|
|
};
|
|
|
|
MODULE_AUTHOR("Uwe Koziolek");
|
|
MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
|
|
u8 pmr;
|
|
|
|
if (ap->port_no) {
|
|
switch (pdev->device) {
|
|
case 0x0180:
|
|
case 0x0181:
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
if ((pmr & SIS_PMR_COMBINED) == 0)
|
|
addr += SIS180_SATA1_OFS;
|
|
break;
|
|
|
|
case 0x0182:
|
|
case 0x0183:
|
|
case 0x1182:
|
|
case 0x1183:
|
|
addr += SIS182_SATA1_OFS;
|
|
break;
|
|
}
|
|
}
|
|
return addr;
|
|
}
|
|
|
|
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
|
|
u32 val, val2 = 0;
|
|
u8 pmr;
|
|
|
|
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
|
return 0xffffffff;
|
|
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
|
|
pci_read_config_dword(pdev, cfg_addr, &val);
|
|
|
|
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
|
|
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
|
|
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
|
|
|
|
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
|
|
}
|
|
|
|
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
|
|
u8 pmr;
|
|
|
|
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
|
return;
|
|
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
|
|
pci_write_config_dword(pdev, cfg_addr, val);
|
|
|
|
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
|
|
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
|
|
pci_write_config_dword(pdev, cfg_addr+0x10, val);
|
|
}
|
|
|
|
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 val, val2 = 0;
|
|
u8 pmr;
|
|
|
|
if (sc_reg > SCR_CONTROL)
|
|
return 0xffffffffU;
|
|
|
|
if (ap->flags & SIS_FLAG_CFGSCR)
|
|
return sis_scr_cfg_read(ap, sc_reg);
|
|
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
|
|
val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
|
|
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
|
|
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
|
|
val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
|
|
|
|
return (val | val2) & 0xfffffffb;
|
|
}
|
|
|
|
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 pmr;
|
|
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
|
|
if (ap->flags & SIS_FLAG_CFGSCR)
|
|
sis_scr_cfg_write(ap, sc_reg, val);
|
|
else {
|
|
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
|
|
(pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
|
|
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
|
|
}
|
|
}
|
|
|
|
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
int rc;
|
|
u32 genctl, val;
|
|
struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
|
|
u8 pmr;
|
|
u8 port2_start = 0x20;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pcim_pin_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* check and see if the SCRs are in IO space or PCI cfg space */
|
|
pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
|
|
if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
|
|
pi.flags |= SIS_FLAG_CFGSCR;
|
|
|
|
/* if hardware thinks SCRs are in IO space, but there are
|
|
* no IO resources assigned, change to PCI cfg space.
|
|
*/
|
|
if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
|
|
((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
|
|
(pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
|
|
genctl &= ~GENCTL_IOMAPPED_SCR;
|
|
pci_write_config_dword(pdev, SIS_GENCTL, genctl);
|
|
pi.flags |= SIS_FLAG_CFGSCR;
|
|
}
|
|
|
|
pci_read_config_byte(pdev, SIS_PMR, &pmr);
|
|
switch (ent->device) {
|
|
case 0x0180:
|
|
case 0x0181:
|
|
|
|
/* The PATA-handling is provided by pata_sis */
|
|
switch (pmr & 0x30) {
|
|
case 0x10:
|
|
ppi[1] = &sis_info133;
|
|
break;
|
|
|
|
case 0x30:
|
|
ppi[0] = &sis_info133;
|
|
break;
|
|
}
|
|
if ((pmr & SIS_PMR_COMBINED) == 0) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"Detected SiS 180/181/964 chipset in SATA mode\n");
|
|
port2_start = 64;
|
|
} else {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"Detected SiS 180/181 chipset in combined mode\n");
|
|
port2_start=0;
|
|
pi.flags |= ATA_FLAG_SLAVE_POSS;
|
|
}
|
|
break;
|
|
|
|
case 0x0182:
|
|
case 0x0183:
|
|
pci_read_config_dword ( pdev, 0x6C, &val);
|
|
if (val & (1L << 31)) {
|
|
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
|
|
pi.flags |= ATA_FLAG_SLAVE_POSS;
|
|
} else {
|
|
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
|
|
}
|
|
break;
|
|
|
|
case 0x1182:
|
|
case 0x1183:
|
|
pci_read_config_dword(pdev, 0x64, &val);
|
|
if (val & 0x10000000) {
|
|
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
|
|
} else {
|
|
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
|
|
pi.flags |= ATA_FLAG_SLAVE_POSS;
|
|
}
|
|
break;
|
|
}
|
|
|
|
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
|
|
if (!probe_ent)
|
|
return -ENOMEM;
|
|
|
|
if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
|
|
void *mmio;
|
|
|
|
mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
|
|
if (!mmio)
|
|
return -ENOMEM;
|
|
|
|
probe_ent->port[0].scr_addr = mmio;
|
|
probe_ent->port[1].scr_addr = mmio + port2_start;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_intx(pdev, 1);
|
|
|
|
if (!ata_device_add(probe_ent))
|
|
return -EIO;
|
|
|
|
devm_kfree(&pdev->dev, probe_ent);
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int __init sis_init(void)
|
|
{
|
|
return pci_register_driver(&sis_pci_driver);
|
|
}
|
|
|
|
static void __exit sis_exit(void)
|
|
{
|
|
pci_unregister_driver(&sis_pci_driver);
|
|
}
|
|
|
|
module_init(sis_init);
|
|
module_exit(sis_exit);
|