forked from Minki/linux
b1c089b7ca
This patch is required not to lost error records by action invoked on error recovery, such as slot reset etc. Following sample (real machine + dummy record injected by aer-inject) shows that record of 28:00.1 could not be retrieved by recovery of 28:00.0: - Before: pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801 e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID) e1000e 0000:28:00.0: device [8086:1096] error status/mask=00001000/00100000 e1000e 0000:28:00.0: [12] Poisoned TLP (First) e1000e 0000:28:00.0: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.0: broadcast error_detected message e1000e 0000:28:00.0: broadcast slot_reset message e1000e 0000:28:00.0: setting latency timer to 64 e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.1: setting latency timer to 64 e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.0: broadcast resume message e1000e 0000:28:00.0: AER driver successfully recovered e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX - After: pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801 e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID) e1000e 0000:28:00.0: device [8086:1096] error status/mask=00001000/00100000 e1000e 0000:28:00.0: [12] Poisoned TLP (First) e1000e 0000:28:00.0: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.1: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2801(Receiver ID) e1000e 0000:28:00.1: device [8086:1096] error status/mask=00081000/00100000 e1000e 0000:28:00.1: [12] Poisoned TLP (First) e1000e 0000:28:00.1: [19] ECRC e1000e 0000:28:00.1: TLP Header: 00000000 00000001 00000002 00000003 e1000e 0000:28:00.1: Error of this Agent(2801) is reported first e1000e 0000:28:00.0: broadcast error_detected message e1000e 0000:28:00.0: broadcast slot_reset message e1000e 0000:28:00.0: setting latency timer to 64 e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.0: PME# disabled e1000e 0000:28:00.1: setting latency timer to 64 e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147) e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.1: PME# disabled e1000e 0000:28:00.0: broadcast resume message e1000e 0000:28:00.0: AER driver successfully recovered e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
882 lines
23 KiB
C
882 lines
23 KiB
C
/*
|
|
* drivers/pci/pcie/aer/aerdrv_core.c
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* This file implements the core part of PCI-Express AER. When an pci-express
|
|
* error is delivered, an error message will be collected and printed to
|
|
* console, then, an error recovery procedure will be executed by following
|
|
* the pci error recovery rules.
|
|
*
|
|
* Copyright (C) 2006 Intel Corp.
|
|
* Tom Long Nguyen (tom.l.nguyen@intel.com)
|
|
* Zhang Yanmin (yanmin.zhang@intel.com)
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/delay.h>
|
|
#include "aerdrv.h"
|
|
|
|
static int forceload;
|
|
static int nosourceid;
|
|
module_param(forceload, bool, 0);
|
|
module_param(nosourceid, bool, 0);
|
|
|
|
int pci_enable_pcie_error_reporting(struct pci_dev *dev)
|
|
{
|
|
u16 reg16 = 0;
|
|
int pos;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return -EIO;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return -EIO;
|
|
|
|
pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
|
|
reg16 = reg16 |
|
|
PCI_EXP_DEVCTL_CERE |
|
|
PCI_EXP_DEVCTL_NFERE |
|
|
PCI_EXP_DEVCTL_FERE |
|
|
PCI_EXP_DEVCTL_URRE;
|
|
pci_write_config_word(dev, pos+PCI_EXP_DEVCTL, reg16);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
|
|
|
|
int pci_disable_pcie_error_reporting(struct pci_dev *dev)
|
|
{
|
|
u16 reg16 = 0;
|
|
int pos;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return -EIO;
|
|
|
|
pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
|
|
reg16 = reg16 & ~(PCI_EXP_DEVCTL_CERE |
|
|
PCI_EXP_DEVCTL_NFERE |
|
|
PCI_EXP_DEVCTL_FERE |
|
|
PCI_EXP_DEVCTL_URRE);
|
|
pci_write_config_word(dev, pos+PCI_EXP_DEVCTL, reg16);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
|
|
|
|
int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u32 status, mask;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return -EIO;
|
|
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
|
|
if (dev->error_state == pci_channel_io_normal)
|
|
status &= ~mask; /* Clear corresponding nonfatal bits */
|
|
else
|
|
status &= mask; /* Clear corresponding fatal bits */
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
|
|
|
|
#if 0
|
|
int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u32 status;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return -EIO;
|
|
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* 0 */
|
|
|
|
static int set_device_error_reporting(struct pci_dev *dev, void *data)
|
|
{
|
|
bool enable = *((bool *)data);
|
|
|
|
if (dev->pcie_type == PCIE_RC_PORT ||
|
|
dev->pcie_type == PCIE_SW_UPSTREAM_PORT ||
|
|
dev->pcie_type == PCIE_SW_DOWNSTREAM_PORT) {
|
|
if (enable)
|
|
pci_enable_pcie_error_reporting(dev);
|
|
else
|
|
pci_disable_pcie_error_reporting(dev);
|
|
}
|
|
|
|
if (enable)
|
|
pcie_set_ecrc_checking(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports.
|
|
* @dev: pointer to root port's pci_dev data structure
|
|
* @enable: true = enable error reporting, false = disable error reporting.
|
|
*/
|
|
static void set_downstream_devices_error_reporting(struct pci_dev *dev,
|
|
bool enable)
|
|
{
|
|
set_device_error_reporting(dev, &enable);
|
|
|
|
if (!dev->subordinate)
|
|
return;
|
|
pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
|
|
}
|
|
|
|
static inline int compare_device_id(struct pci_dev *dev,
|
|
struct aer_err_info *e_info)
|
|
{
|
|
if (e_info->id == ((dev->bus->number << 8) | dev->devfn)) {
|
|
/*
|
|
* Device ID match
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
|
|
{
|
|
if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
|
|
e_info->dev[e_info->error_dev_num] = dev;
|
|
e_info->error_dev_num++;
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#define PCI_BUS(x) (((x) >> 8) & 0xff)
|
|
|
|
static int find_device_iter(struct pci_dev *dev, void *data)
|
|
{
|
|
int pos;
|
|
u32 status;
|
|
u32 mask;
|
|
u16 reg16;
|
|
int result;
|
|
struct aer_err_info *e_info = (struct aer_err_info *)data;
|
|
|
|
/*
|
|
* When bus id is equal to 0, it might be a bad id
|
|
* reported by root port.
|
|
*/
|
|
if (!nosourceid && (PCI_BUS(e_info->id) != 0)) {
|
|
result = compare_device_id(dev, e_info);
|
|
if (result)
|
|
add_error_device(e_info, dev);
|
|
|
|
/*
|
|
* If there is no multiple error, we stop
|
|
* or continue based on the id comparing.
|
|
*/
|
|
if (!e_info->multi_error_valid)
|
|
return result;
|
|
|
|
/*
|
|
* If there are multiple errors and id does match,
|
|
* We need continue to search other devices under
|
|
* the root port. Return 0 means that.
|
|
*/
|
|
if (result)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When either
|
|
* 1) nosourceid==y;
|
|
* 2) bus id is equal to 0. Some ports might lose the bus
|
|
* id of error source id;
|
|
* 3) There are multiple errors and prior id comparing fails;
|
|
* We check AER status registers to find the initial reporter.
|
|
*/
|
|
if (atomic_read(&dev->enable_cnt) == 0)
|
|
return 0;
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return 0;
|
|
/* Check if AER is enabled */
|
|
pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
|
|
if (!(reg16 & (
|
|
PCI_EXP_DEVCTL_CERE |
|
|
PCI_EXP_DEVCTL_NFERE |
|
|
PCI_EXP_DEVCTL_FERE |
|
|
PCI_EXP_DEVCTL_URRE)))
|
|
return 0;
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return 0;
|
|
|
|
status = 0;
|
|
mask = 0;
|
|
if (e_info->severity == AER_CORRECTABLE) {
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &mask);
|
|
if (status & ~mask) {
|
|
add_error_device(e_info, dev);
|
|
goto added;
|
|
}
|
|
} else {
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask);
|
|
if (status & ~mask) {
|
|
add_error_device(e_info, dev);
|
|
goto added;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
added:
|
|
if (e_info->multi_error_valid)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* find_source_device - search through device hierarchy for source device
|
|
* @parent: pointer to Root Port pci_dev data structure
|
|
* @err_info: including detailed error information such like id
|
|
*
|
|
* Invoked when error is detected at the Root Port.
|
|
*/
|
|
static void find_source_device(struct pci_dev *parent,
|
|
struct aer_err_info *e_info)
|
|
{
|
|
struct pci_dev *dev = parent;
|
|
int result;
|
|
|
|
/* Is Root Port an agent that sends error message? */
|
|
result = find_device_iter(dev, e_info);
|
|
if (result)
|
|
return;
|
|
|
|
pci_walk_bus(parent->subordinate, find_device_iter, e_info);
|
|
}
|
|
|
|
static int report_error_detected(struct pci_dev *dev, void *data)
|
|
{
|
|
pci_ers_result_t vote;
|
|
struct pci_error_handlers *err_handler;
|
|
struct aer_broadcast_data *result_data;
|
|
result_data = (struct aer_broadcast_data *) data;
|
|
|
|
dev->error_state = result_data->state;
|
|
|
|
if (!dev->driver ||
|
|
!dev->driver->err_handler ||
|
|
!dev->driver->err_handler->error_detected) {
|
|
if (result_data->state == pci_channel_io_frozen &&
|
|
!(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) {
|
|
/*
|
|
* In case of fatal recovery, if one of down-
|
|
* stream device has no driver. We might be
|
|
* unable to recover because a later insmod
|
|
* of a driver for this device is unaware of
|
|
* its hw state.
|
|
*/
|
|
dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n",
|
|
dev->driver ?
|
|
"no AER-aware driver" : "no driver");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
err_handler = dev->driver->err_handler;
|
|
vote = err_handler->error_detected(dev, result_data->state);
|
|
result_data->result = merge_result(result_data->result, vote);
|
|
return 0;
|
|
}
|
|
|
|
static int report_mmio_enabled(struct pci_dev *dev, void *data)
|
|
{
|
|
pci_ers_result_t vote;
|
|
struct pci_error_handlers *err_handler;
|
|
struct aer_broadcast_data *result_data;
|
|
result_data = (struct aer_broadcast_data *) data;
|
|
|
|
if (!dev->driver ||
|
|
!dev->driver->err_handler ||
|
|
!dev->driver->err_handler->mmio_enabled)
|
|
return 0;
|
|
|
|
err_handler = dev->driver->err_handler;
|
|
vote = err_handler->mmio_enabled(dev);
|
|
result_data->result = merge_result(result_data->result, vote);
|
|
return 0;
|
|
}
|
|
|
|
static int report_slot_reset(struct pci_dev *dev, void *data)
|
|
{
|
|
pci_ers_result_t vote;
|
|
struct pci_error_handlers *err_handler;
|
|
struct aer_broadcast_data *result_data;
|
|
result_data = (struct aer_broadcast_data *) data;
|
|
|
|
if (!dev->driver ||
|
|
!dev->driver->err_handler ||
|
|
!dev->driver->err_handler->slot_reset)
|
|
return 0;
|
|
|
|
err_handler = dev->driver->err_handler;
|
|
vote = err_handler->slot_reset(dev);
|
|
result_data->result = merge_result(result_data->result, vote);
|
|
return 0;
|
|
}
|
|
|
|
static int report_resume(struct pci_dev *dev, void *data)
|
|
{
|
|
struct pci_error_handlers *err_handler;
|
|
|
|
dev->error_state = pci_channel_io_normal;
|
|
|
|
if (!dev->driver ||
|
|
!dev->driver->err_handler ||
|
|
!dev->driver->err_handler->resume)
|
|
return 0;
|
|
|
|
err_handler = dev->driver->err_handler;
|
|
err_handler->resume(dev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* broadcast_error_message - handle message broadcast to downstream drivers
|
|
* @dev: pointer to from where in a hierarchy message is broadcasted down
|
|
* @state: error state
|
|
* @error_mesg: message to print
|
|
* @cb: callback to be broadcasted
|
|
*
|
|
* Invoked during error recovery process. Once being invoked, the content
|
|
* of error severity will be broadcasted to all downstream drivers in a
|
|
* hierarchy in question.
|
|
*/
|
|
static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
|
|
enum pci_channel_state state,
|
|
char *error_mesg,
|
|
int (*cb)(struct pci_dev *, void *))
|
|
{
|
|
struct aer_broadcast_data result_data;
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg);
|
|
result_data.state = state;
|
|
if (cb == report_error_detected)
|
|
result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
|
|
else
|
|
result_data.result = PCI_ERS_RESULT_RECOVERED;
|
|
|
|
if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
|
|
/*
|
|
* If the error is reported by a bridge, we think this error
|
|
* is related to the downstream link of the bridge, so we
|
|
* do error recovery on all subordinates of the bridge instead
|
|
* of the bridge and clear the error status of the bridge.
|
|
*/
|
|
if (cb == report_error_detected)
|
|
dev->error_state = state;
|
|
pci_walk_bus(dev->subordinate, cb, &result_data);
|
|
if (cb == report_resume) {
|
|
pci_cleanup_aer_uncorrect_error_status(dev);
|
|
dev->error_state = pci_channel_io_normal;
|
|
}
|
|
} else {
|
|
/*
|
|
* If the error is reported by an end point, we think this
|
|
* error is related to the upstream link of the end point.
|
|
*/
|
|
pci_walk_bus(dev->bus, cb, &result_data);
|
|
}
|
|
|
|
return result_data.result;
|
|
}
|
|
|
|
struct find_aer_service_data {
|
|
struct pcie_port_service_driver *aer_driver;
|
|
int is_downstream;
|
|
};
|
|
|
|
static int find_aer_service_iter(struct device *device, void *data)
|
|
{
|
|
struct device_driver *driver;
|
|
struct pcie_port_service_driver *service_driver;
|
|
struct find_aer_service_data *result;
|
|
|
|
result = (struct find_aer_service_data *) data;
|
|
|
|
if (device->bus == &pcie_port_bus_type) {
|
|
struct pcie_port_data *port_data;
|
|
|
|
port_data = pci_get_drvdata(to_pcie_device(device)->port);
|
|
if (port_data->port_type == PCIE_SW_DOWNSTREAM_PORT)
|
|
result->is_downstream = 1;
|
|
|
|
driver = device->driver;
|
|
if (driver) {
|
|
service_driver = to_service_driver(driver);
|
|
if (service_driver->service == PCIE_PORT_SERVICE_AER) {
|
|
result->aer_driver = service_driver;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void find_aer_service(struct pci_dev *dev,
|
|
struct find_aer_service_data *data)
|
|
{
|
|
int retval;
|
|
retval = device_for_each_child(&dev->dev, data, find_aer_service_iter);
|
|
}
|
|
|
|
static pci_ers_result_t reset_link(struct pcie_device *aerdev,
|
|
struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *udev;
|
|
pci_ers_result_t status;
|
|
struct find_aer_service_data data;
|
|
|
|
if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)
|
|
udev = dev;
|
|
else
|
|
udev = dev->bus->self;
|
|
|
|
data.is_downstream = 0;
|
|
data.aer_driver = NULL;
|
|
find_aer_service(udev, &data);
|
|
|
|
/*
|
|
* Use the aer driver of the error agent firstly.
|
|
* If it hasn't the aer driver, use the root port's
|
|
*/
|
|
if (!data.aer_driver || !data.aer_driver->reset_link) {
|
|
if (data.is_downstream &&
|
|
aerdev->device.driver &&
|
|
to_service_driver(aerdev->device.driver)->reset_link) {
|
|
data.aer_driver =
|
|
to_service_driver(aerdev->device.driver);
|
|
} else {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "no link-reset "
|
|
"support\n");
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
}
|
|
|
|
status = data.aer_driver->reset_link(udev);
|
|
if (status != PCI_ERS_RESULT_RECOVERED) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "link reset at upstream "
|
|
"device %s failed\n", pci_name(udev));
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* do_recovery - handle nonfatal/fatal error recovery process
|
|
* @aerdev: pointer to a pcie_device data structure of root port
|
|
* @dev: pointer to a pci_dev data structure of agent detecting an error
|
|
* @severity: error severity type
|
|
*
|
|
* Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
|
|
* error detected message to all downstream drivers within a hierarchy in
|
|
* question and return the returned code.
|
|
*/
|
|
static pci_ers_result_t do_recovery(struct pcie_device *aerdev,
|
|
struct pci_dev *dev,
|
|
int severity)
|
|
{
|
|
pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
|
|
enum pci_channel_state state;
|
|
|
|
if (severity == AER_FATAL)
|
|
state = pci_channel_io_frozen;
|
|
else
|
|
state = pci_channel_io_normal;
|
|
|
|
status = broadcast_error_message(dev,
|
|
state,
|
|
"error_detected",
|
|
report_error_detected);
|
|
|
|
if (severity == AER_FATAL) {
|
|
result = reset_link(aerdev, dev);
|
|
if (result != PCI_ERS_RESULT_RECOVERED) {
|
|
/* TODO: Should panic here? */
|
|
return result;
|
|
}
|
|
}
|
|
|
|
if (status == PCI_ERS_RESULT_CAN_RECOVER)
|
|
status = broadcast_error_message(dev,
|
|
state,
|
|
"mmio_enabled",
|
|
report_mmio_enabled);
|
|
|
|
if (status == PCI_ERS_RESULT_NEED_RESET) {
|
|
/*
|
|
* TODO: Should call platform-specific
|
|
* functions to reset slot before calling
|
|
* drivers' slot_reset callbacks?
|
|
*/
|
|
status = broadcast_error_message(dev,
|
|
state,
|
|
"slot_reset",
|
|
report_slot_reset);
|
|
}
|
|
|
|
if (status == PCI_ERS_RESULT_RECOVERED)
|
|
broadcast_error_message(dev,
|
|
state,
|
|
"resume",
|
|
report_resume);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* handle_error_source - handle logging error into an event log
|
|
* @aerdev: pointer to pcie_device data structure of the root port
|
|
* @dev: pointer to pci_dev data structure of error source device
|
|
* @info: comprehensive error information
|
|
*
|
|
* Invoked when an error being detected by Root Port.
|
|
*/
|
|
static void handle_error_source(struct pcie_device *aerdev,
|
|
struct pci_dev *dev,
|
|
struct aer_err_info *info)
|
|
{
|
|
pci_ers_result_t status = 0;
|
|
int pos;
|
|
|
|
if (info->severity == AER_CORRECTABLE) {
|
|
/*
|
|
* Correctable error does not need software intevention.
|
|
* No need to go through error recovery process.
|
|
*/
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (pos)
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
|
|
info->status);
|
|
} else {
|
|
status = do_recovery(aerdev, dev, info->severity);
|
|
if (status == PCI_ERS_RESULT_RECOVERED) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "AER driver "
|
|
"successfully recovered\n");
|
|
} else {
|
|
/* TODO: Should kernel panic here? */
|
|
dev_printk(KERN_DEBUG, &dev->dev, "AER driver didn't "
|
|
"recover\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* aer_enable_rootport - enable Root Port's interrupts when receiving messages
|
|
* @rpc: pointer to a Root Port data structure
|
|
*
|
|
* Invoked when PCIE bus loads AER service driver.
|
|
*/
|
|
void aer_enable_rootport(struct aer_rpc *rpc)
|
|
{
|
|
struct pci_dev *pdev = rpc->rpd->port;
|
|
int pos, aer_pos;
|
|
u16 reg16;
|
|
u32 reg32;
|
|
|
|
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
/* Clear PCIE Capability's Device Status */
|
|
pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16);
|
|
pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
|
|
|
|
/* Disable system error generation in response to error messages */
|
|
pci_read_config_word(pdev, pos + PCI_EXP_RTCTL, ®16);
|
|
reg16 &= ~(SYSTEM_ERROR_INTR_ON_MESG_MASK);
|
|
pci_write_config_word(pdev, pos + PCI_EXP_RTCTL, reg16);
|
|
|
|
aer_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
|
|
/* Clear error status */
|
|
pci_read_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, ®32);
|
|
pci_write_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, reg32);
|
|
pci_read_config_dword(pdev, aer_pos + PCI_ERR_COR_STATUS, ®32);
|
|
pci_write_config_dword(pdev, aer_pos + PCI_ERR_COR_STATUS, reg32);
|
|
pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32);
|
|
pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
|
|
|
|
/*
|
|
* Enable error reporting for the root port device and downstream port
|
|
* devices.
|
|
*/
|
|
set_downstream_devices_error_reporting(pdev, true);
|
|
|
|
/* Enable Root Port's interrupt in response to error messages */
|
|
pci_write_config_dword(pdev,
|
|
aer_pos + PCI_ERR_ROOT_COMMAND,
|
|
ROOT_PORT_INTR_ON_MESG_MASK);
|
|
}
|
|
|
|
/**
|
|
* disable_root_aer - disable Root Port's interrupts when receiving messages
|
|
* @rpc: pointer to a Root Port data structure
|
|
*
|
|
* Invoked when PCIE bus unloads AER service driver.
|
|
*/
|
|
static void disable_root_aer(struct aer_rpc *rpc)
|
|
{
|
|
struct pci_dev *pdev = rpc->rpd->port;
|
|
u32 reg32;
|
|
int pos;
|
|
|
|
/*
|
|
* Disable error reporting for the root port device and downstream port
|
|
* devices.
|
|
*/
|
|
set_downstream_devices_error_reporting(pdev, false);
|
|
|
|
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
|
|
/* Disable Root's interrupt in response to error messages */
|
|
pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
|
|
|
|
/* Clear Root's error status reg */
|
|
pci_read_config_dword(pdev, pos + PCI_ERR_ROOT_STATUS, ®32);
|
|
pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_STATUS, reg32);
|
|
}
|
|
|
|
/**
|
|
* get_e_source - retrieve an error source
|
|
* @rpc: pointer to the root port which holds an error
|
|
*
|
|
* Invoked by DPC handler to consume an error.
|
|
*/
|
|
static struct aer_err_source *get_e_source(struct aer_rpc *rpc)
|
|
{
|
|
struct aer_err_source *e_source;
|
|
unsigned long flags;
|
|
|
|
/* Lock access to Root error producer/consumer index */
|
|
spin_lock_irqsave(&rpc->e_lock, flags);
|
|
if (rpc->prod_idx == rpc->cons_idx) {
|
|
spin_unlock_irqrestore(&rpc->e_lock, flags);
|
|
return NULL;
|
|
}
|
|
e_source = &rpc->e_sources[rpc->cons_idx];
|
|
rpc->cons_idx++;
|
|
if (rpc->cons_idx == AER_ERROR_SOURCES_MAX)
|
|
rpc->cons_idx = 0;
|
|
spin_unlock_irqrestore(&rpc->e_lock, flags);
|
|
|
|
return e_source;
|
|
}
|
|
|
|
/**
|
|
* get_device_error_info - read error status from dev and store it to info
|
|
* @dev: pointer to the device expected to have a error record
|
|
* @info: pointer to structure to store the error record
|
|
*
|
|
* Return 1 on success, 0 on error.
|
|
*/
|
|
static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
|
|
{
|
|
int pos, temp;
|
|
|
|
info->status = 0;
|
|
info->tlp_header_valid = 0;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
|
|
/* The device might not support AER */
|
|
if (!pos)
|
|
return 1;
|
|
|
|
if (info->severity == AER_CORRECTABLE) {
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS,
|
|
&info->status);
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK,
|
|
&info->mask);
|
|
if (!(info->status & ~info->mask))
|
|
return 0;
|
|
} else if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE ||
|
|
info->severity == AER_NONFATAL) {
|
|
|
|
/* Link is still healthy for IO reads */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
|
|
&info->status);
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK,
|
|
&info->mask);
|
|
if (!(info->status & ~info->mask))
|
|
return 0;
|
|
|
|
/* Get First Error Pointer */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_CAP, &temp);
|
|
info->first_error = PCI_ERR_CAP_FEP(temp);
|
|
|
|
if (info->status & AER_LOG_TLP_MASKS) {
|
|
info->tlp_header_valid = 1;
|
|
pci_read_config_dword(dev,
|
|
pos + PCI_ERR_HEADER_LOG, &info->tlp.dw0);
|
|
pci_read_config_dword(dev,
|
|
pos + PCI_ERR_HEADER_LOG + 4, &info->tlp.dw1);
|
|
pci_read_config_dword(dev,
|
|
pos + PCI_ERR_HEADER_LOG + 8, &info->tlp.dw2);
|
|
pci_read_config_dword(dev,
|
|
pos + PCI_ERR_HEADER_LOG + 12, &info->tlp.dw3);
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static inline void aer_process_err_devices(struct pcie_device *p_device,
|
|
struct aer_err_info *e_info)
|
|
{
|
|
int i;
|
|
|
|
if (!e_info->dev[0]) {
|
|
dev_printk(KERN_DEBUG, &p_device->port->dev,
|
|
"can't find device of ID%04x\n",
|
|
e_info->id);
|
|
}
|
|
|
|
/* Report all before handle them, not to lost records by reset etc. */
|
|
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
|
|
if (get_device_error_info(e_info->dev[i], e_info))
|
|
aer_print_error(e_info->dev[i], e_info);
|
|
}
|
|
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
|
|
if (get_device_error_info(e_info->dev[i], e_info))
|
|
handle_error_source(p_device, e_info->dev[i], e_info);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* aer_isr_one_error - consume an error detected by root port
|
|
* @p_device: pointer to error root port service device
|
|
* @e_src: pointer to an error source
|
|
*/
|
|
static void aer_isr_one_error(struct pcie_device *p_device,
|
|
struct aer_err_source *e_src)
|
|
{
|
|
struct aer_err_info *e_info;
|
|
int i;
|
|
|
|
/* struct aer_err_info might be big, so we allocate it with slab */
|
|
e_info = kmalloc(sizeof(struct aer_err_info), GFP_KERNEL);
|
|
if (e_info == NULL) {
|
|
dev_printk(KERN_DEBUG, &p_device->port->dev,
|
|
"Can't allocate mem when processing AER errors\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* There is a possibility that both correctable error and
|
|
* uncorrectable error being logged. Report correctable error first.
|
|
*/
|
|
for (i = 1; i & ROOT_ERR_STATUS_MASKS ; i <<= 2) {
|
|
if (i > 4)
|
|
break;
|
|
if (!(e_src->status & i))
|
|
continue;
|
|
|
|
memset(e_info, 0, sizeof(struct aer_err_info));
|
|
|
|
/* Init comprehensive error information */
|
|
if (i & PCI_ERR_ROOT_COR_RCV) {
|
|
e_info->id = ERR_COR_ID(e_src->id);
|
|
e_info->severity = AER_CORRECTABLE;
|
|
} else {
|
|
e_info->id = ERR_UNCOR_ID(e_src->id);
|
|
e_info->severity = ((e_src->status >> 6) & 1);
|
|
}
|
|
if (e_src->status &
|
|
(PCI_ERR_ROOT_MULTI_COR_RCV |
|
|
PCI_ERR_ROOT_MULTI_UNCOR_RCV))
|
|
e_info->multi_error_valid = 1;
|
|
|
|
aer_print_port_info(p_device->port, e_info);
|
|
|
|
find_source_device(p_device->port, e_info);
|
|
aer_process_err_devices(p_device, e_info);
|
|
}
|
|
|
|
kfree(e_info);
|
|
}
|
|
|
|
/**
|
|
* aer_isr - consume errors detected by root port
|
|
* @work: definition of this work item
|
|
*
|
|
* Invoked, as DPC, when root port records new detected error
|
|
*/
|
|
void aer_isr(struct work_struct *work)
|
|
{
|
|
struct aer_rpc *rpc = container_of(work, struct aer_rpc, dpc_handler);
|
|
struct pcie_device *p_device = rpc->rpd;
|
|
struct aer_err_source *e_src;
|
|
|
|
mutex_lock(&rpc->rpc_mutex);
|
|
e_src = get_e_source(rpc);
|
|
while (e_src) {
|
|
aer_isr_one_error(p_device, e_src);
|
|
e_src = get_e_source(rpc);
|
|
}
|
|
mutex_unlock(&rpc->rpc_mutex);
|
|
|
|
wake_up(&rpc->wait_release);
|
|
}
|
|
|
|
/**
|
|
* aer_delete_rootport - disable root port aer and delete service data
|
|
* @rpc: pointer to a root port device being deleted
|
|
*
|
|
* Invoked when AER service unloaded on a specific Root Port
|
|
*/
|
|
void aer_delete_rootport(struct aer_rpc *rpc)
|
|
{
|
|
/* Disable root port AER itself */
|
|
disable_root_aer(rpc);
|
|
|
|
kfree(rpc);
|
|
}
|
|
|
|
/**
|
|
* aer_init - provide AER initialization
|
|
* @dev: pointer to AER pcie device
|
|
*
|
|
* Invoked when AER service driver is loaded.
|
|
*/
|
|
int aer_init(struct pcie_device *dev)
|
|
{
|
|
if (aer_osc_setup(dev) && !forceload)
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|