linux/drivers/tty
Stefan Roese d99482673f serial: mctrl_gpio: Check if GPIO property exisits before requesting it
This patch adds a check for the GPIOs property existence, before the
GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio
support is added (2nd patch in this patch series) on x86 platforms using
ACPI.

Here Mika's comments from 2016-08-09:

"
I noticed that with v4.8-rc1 serial console of some of our Broxton
systems does not work properly anymore. I'm able to see output but input
does not work.

I bisected it down to commit 4ef03d3287
("tty/serial/8250: use mctrl_gpio helpers").

The reason why it fails is that in ACPI we do not have names for GPIOs
(except when _DSD is used) so we use the "idx" to index into _CRS GPIO
resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs
calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The
UART device in Broxton has following (simplified) ACPI description:

    Device (URT4)
    {
        ...
        Name (_CRS, ResourceTemplate () {
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO0", 0x00, ResourceConsumer)
            {
                0x003A
            }
            GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                    "\\_SB.GPO0", 0x00, ResourceConsumer)
            {
                0x003D
            }
        })

In this case it finds the first GPIO (0x003A which happens to be RX pin
for that UART), turns it into GPIO which then breaks input for the UART
device. This also breaks systems with bluetooth connected to UART (those
typically have some GPIOs in their _CRS).

Any ideas how to fix this?

We cannot just drop the _CRS index lookup fallback because that would
break many existing machines out there so maybe we can limit this to
only DT enabled machines. Or alternatively probe if the property first
exists before trying to acquire the GPIOs (using
device_property_present()).
"

This patch implements the fix suggested by Mika in his statement above.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21 10:18:43 +02:00
..
hvc RISC-V Patches for the 5.2 Merge Window, Part 1 v3 2019-05-19 09:56:36 -07:00
ipwireless tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
serdev tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
serial serial: mctrl_gpio: Check if GPIO property exisits before requesting it 2019-06-21 10:18:43 +02:00
vt Revert "consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c" 2019-06-04 21:01:58 +02:00
amiserial.c kill TIOCSERGSTRUCT 2018-10-13 00:50:53 -04:00
cyclades.c cyclades: switch to ->[sg]et_serial() 2018-10-13 00:50:30 -04:00
ehv_bytechan.c tty: Convert to using %pOFn instead of device_node.name 2018-09-18 16:07:25 +02:00
goldfish.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
isicom.c isicom: switch to ->[sg]et_serial() 2018-10-13 00:50:31 -04:00
Kconfig docs: serial: convert docs to ReST and rename to *.rst 2019-04-25 11:37:42 +02:00
Makefile tty: Add NULL TTY driver 2019-04-16 15:21:34 +02:00
mips_ejtag_fdc.c tty: Remove redundant license text 2017-11-08 13:08:12 +01:00
moxa.c moxa: switch to ->[sg]et_serial() 2018-10-13 00:50:32 -04:00
moxa.h tty: moxa: Add support for CMSPAR 2017-11-28 15:32:33 +01:00
mxser.c mxser: switch to ->[sg]et_serial() 2018-10-13 00:50:32 -04:00
mxser.h
n_gsm.c tty: n_gsm: Mark expected switch fall-throughs 2019-02-26 12:30:44 +01:00
n_hdlc.c tty/n_hdlc: mark expected switch fall-through 2019-02-14 10:49:19 +01:00
n_null.c tty: Remove redundant license text 2017-11-08 13:08:12 +01:00
n_r3964.c tty: Don't block on IO when ldisc change is pending 2018-12-05 12:16:33 +01:00
n_tracerouter.c tty: Remove redundant license text 2017-11-08 13:08:12 +01:00
n_tracesink.c tty: Remove redundant license text 2017-11-08 13:08:12 +01:00
n_tracesink.h tty: Remove redundant license text 2017-11-08 13:08:12 +01:00
n_tty.c n_tty: check for negative and zero space return from tty_write_room 2019-04-16 15:21:33 +02:00
nozomi.c tty/nozomi: use pci_iomap instead of ioremap_nocache 2019-02-12 10:26:45 +01:00
pty.c Revert "tty: pty: Fix race condition between release_one_tty and pty_write" 2019-03-29 15:47:40 +01:00
rocket_int.h
rocket.c TTY/Serial patches for 5.2-rc1 2019-05-08 10:07:28 -07:00
rocket.h tty: rocket: Remove RCPK_GET_STRUCT ioctl 2019-04-25 11:58:56 +02:00
synclink_gt.c synclink_gt(): fix compat_ioctl() 2018-10-13 00:50:52 -04:00
synclink.c tty/synclink: remove ISA support 2019-02-12 08:51:33 +01:00
synclinkmp.c synclink: reduce pointless checks in ->ioctl() 2018-10-13 00:50:43 -04:00
sysrq.c panic: avoid the extra noise dmesg 2019-05-14 19:52:51 -07:00
tty_audit.c audit: join tty records to their syscall 2019-02-07 21:33:54 -05:00
tty_baudrate.c termios, tty/tty_baudrate.c: fix buffer overrun 2018-11-08 03:36:45 -08:00
tty_buffer.c tty: increase the default flip buffer limit to 2*640K 2019-01-30 12:03:58 +01:00
tty_io.c tty: tty_io: fix driver refcount imbalance on error path 2019-05-24 10:09:12 +02:00
tty_ioctl.c move compat handling of tty ioctls to tty_compat_ioctl() 2018-09-14 11:12:17 -04:00
tty_jobctrl.c tty: fix read of tty->pgrp outside of ctrl_lock 2019-03-28 01:28:23 +09:00
tty_ldisc.c tty: ldisc: add sysctl to prevent autoloading of ldiscs 2019-01-30 09:31:30 +01:00
tty_ldsem.c tty/ldsem: Decrement wait_readers on timeouted down_read() 2018-12-05 12:16:33 +01:00
tty_mutex.c
tty_port.c Revert "tty: fix NULL pointer issue when tty_port ops is not set" 2019-04-16 15:21:34 +02:00
ttynull.c tty: Add NULL TTY driver 2019-04-16 15:21:34 +02:00
vcc.c tty: fix up a few remaining files without SPDX identifiers 2019-04-04 18:48:43 +02:00