linux/arch/arm/boot/dts/imx27-apf27.dts
Shawn Guo be4ccfcec3 ARM: dts: imx: use nodes label in board dts
Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:42 +08:00

86 lines
1.4 KiB
Plaintext

/*
* Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
* Copyright 2012 Armadeus Systems <support@armadeus.com>
*
* Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx27.dtsi"
/ {
model = "Armadeus Systems APF27 module";
compatible = "armadeus,imx27-apf27", "fsl,imx27";
memory {
reg = <0xa0000000 0x04000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
clock-frequency = <0>;
};
};
};
&uart1 {
status = "okay";
};
&fec {
status = "okay";
};
&nfc {
status = "okay";
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "env2";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "firmware";
reg = <0x200000 0x80000>;
};
partition@280000 {
label = "dtb";
reg = <0x280000 0x80000>;
};
partition@300000 {
label = "kernel";
reg = <0x300000 0x500000>;
};
partition@800000 {
label = "rootfs";
reg = <0x800000 0xf800000>;
};
};