Benjamin Gaignard d89e119a08 iio: add hardware triggered operating mode ... Devices, like stm32 timer, could be triggered by hardware events which are not buffer or software events. However it could be necessary to validate the triggers like it is done for buffer or event triggered modes. This patch add a new INDIO_HARDWARE_TRIGGERED operating mode for this kind of devices and allow this mode to register trigger consumer. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-06-11 15:58:41 +01:00
..
accel	Revert "iio: accel: bma180: Add support for BMA250E"	2017-06-11 15:07:41 +01:00
adc	iio: Aspeed ADC - Handle return value of clk_prepare_enable	2017-06-11 15:08:20 +01:00
amplifiers
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: hid-sensor-hub: Implement batch mode	2017-05-16 19:44:01 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	iio: imu: inv_mpu6050: replace sprintf with scnprintf	2017-06-11 15:07:38 +01:00
light	iio: light: rpr0521 channel numbers reordered	2017-05-21 15:06:15 +01:00
magnetometer	iio: magnetometer: st_magn_spi: fix spi_device_id table	2017-06-11 15:07:40 +01:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: zpa2326: report interrupted case as failure	2017-05-14 15:28:14 +01:00
proximity	iio: proximity: sx9500: Use devm_gpiod_get()	2017-06-11 15:07:34 +01:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: stm32 trigger: Add support for TRGO2 triggers	2017-05-07 16:08:10 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00