forked from Minki/linux
a45aa3b305
The superspeed device attached to a USB 3.0 hub(such as VIA's) doesn't respond the address device command after resume. The root cause is the superspeed hub will miss the Hub Depth value that is used as an offset into the route string to locate the bits it uses to determine the downstream port number after reset, and all packets can't be routed to the device attached to the superspeed hub. Hub driver sends a Set Hub Depth request to the superspeed hub except for USB 3.0 root hub when the hub is initialized and doesn't send the request again after reset due to the resume process. So moving the code that sends the Set Hub Depth request to the superspeed hub from hub_configure() to hub_activate() is to cover those situations include initialization and reset. The patch should be backported to kernels as old as 2.6.39. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org |
||
|---|---|---|
| .. | ||
| buffer.c | ||
| config.c | ||
| devices.c | ||
| devio.c | ||
| driver.c | ||
| endpoint.c | ||
| file.c | ||
| generic.c | ||
| hcd-pci.c | ||
| hcd.c | ||
| hub.c | ||
| inode.c | ||
| Kconfig | ||
| Makefile | ||
| message.c | ||
| notify.c | ||
| otg_whitelist.h | ||
| quirks.c | ||
| sysfs.c | ||
| urb.c | ||
| usb.c | ||
| usb.h | ||