forked from Minki/linux
d19bb397e1
This patch extends nodes of PMU system controller on Exynos4210, 4x12, 5250 and 5420 SoCs with newly defined properties used by Exynos CLKOUT driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
785 lines
18 KiB
Plaintext
785 lines
18 KiB
Plaintext
/*
|
|
* SAMSUNG EXYNOS5250 SoC device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
|
|
* EXYNOS5250 based board files can include this file and provide
|
|
* values for board specfic bindings.
|
|
*
|
|
* Note: This file does not include device nodes for all the controllers in
|
|
* EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
|
|
* additional nodes can be added to this file.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos5250.h>
|
|
#include "exynos5.dtsi"
|
|
#include "exynos5250-pinctrl.dtsi"
|
|
|
|
#include <dt-bindings/clock/exynos-audss-clk.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos5250", "samsung,exynos5";
|
|
|
|
aliases {
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
gsc0 = &gsc_0;
|
|
gsc1 = &gsc_1;
|
|
gsc2 = &gsc_2;
|
|
gsc3 = &gsc_3;
|
|
mshc0 = &mmc_0;
|
|
mshc1 = &mmc_1;
|
|
mshc2 = &mmc_2;
|
|
mshc3 = &mmc_3;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
i2c2 = &i2c_2;
|
|
i2c3 = &i2c_3;
|
|
i2c4 = &i2c_4;
|
|
i2c5 = &i2c_5;
|
|
i2c6 = &i2c_6;
|
|
i2c7 = &i2c_7;
|
|
i2c8 = &i2c_8;
|
|
i2c9 = &i2c_9;
|
|
pinctrl0 = &pinctrl_0;
|
|
pinctrl1 = &pinctrl_1;
|
|
pinctrl2 = &pinctrl_2;
|
|
pinctrl3 = &pinctrl_3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
clock-frequency = <1700000000>;
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
clock-frequency = <1700000000>;
|
|
};
|
|
};
|
|
|
|
sysram@02020000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x02020000 0x30000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x02020000 0x30000>;
|
|
|
|
smp-sysram@0 {
|
|
compatible = "samsung,exynos4210-sysram";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
smp-sysram@2f000 {
|
|
compatible = "samsung,exynos4210-sysram-ns";
|
|
reg = <0x2f000 0x1000>;
|
|
};
|
|
};
|
|
|
|
pd_gsc: gsc-power-domain@10044000 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044000 0x20>;
|
|
};
|
|
|
|
pd_mfc: mfc-power-domain@10044040 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044040 0x20>;
|
|
};
|
|
|
|
clock: clock-controller@10010000 {
|
|
compatible = "samsung,exynos5250-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_audss: audss-clock-controller@3810000 {
|
|
compatible = "samsung,exynos5250-audss-clock";
|
|
reg = <0x03810000 0x0C>;
|
|
#clock-cells = <1>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
|
|
<&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
|
|
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
/* Unfortunately we need this since some versions of U-Boot
|
|
* on Exynos don't set the CNTFRQ register, so we need the
|
|
* value from DT.
|
|
*/
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
mct@101C0000 {
|
|
compatible = "samsung,exynos4210-mct";
|
|
reg = <0x101C0000 0x800>;
|
|
interrupt-controller;
|
|
#interrups-cells = <2>;
|
|
interrupt-parent = <&mct_map>;
|
|
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
|
|
<4 0>, <5 0>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
|
clock-names = "fin_pll", "mct";
|
|
|
|
mct_map: mct-map {
|
|
#interrupt-cells = <2>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0x0 0 &combiner 23 3>,
|
|
<0x1 0 &combiner 23 4>,
|
|
<0x2 0 &combiner 25 2>,
|
|
<0x3 0 &combiner 25 3>,
|
|
<0x4 0 &gic 0 120 0>,
|
|
<0x5 0 &gic 0 121 0>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a15-pmu";
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <1 2>, <22 4>;
|
|
};
|
|
|
|
pinctrl_0: pinctrl@11400000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x11400000 0x1000>;
|
|
interrupts = <0 46 0>;
|
|
|
|
wakup_eint: wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 32 0>;
|
|
};
|
|
};
|
|
|
|
pinctrl_1: pinctrl@13400000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x13400000 0x1000>;
|
|
interrupts = <0 45 0>;
|
|
};
|
|
|
|
pinctrl_2: pinctrl@10d10000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x10d10000 0x1000>;
|
|
interrupts = <0 50 0>;
|
|
};
|
|
|
|
pinctrl_3: pinctrl@03860000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x03860000 0x1000>;
|
|
interrupts = <0 47 0>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10040000 {
|
|
compatible = "samsung,exynos5250-pmu", "syscon";
|
|
reg = <0x10040000 0x5000>;
|
|
clock-names = "clkout16";
|
|
clocks = <&clock CLK_FIN_PLL>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sysreg_system_controller: syscon@10050000 {
|
|
compatible = "samsung,exynos5-sysreg", "syscon";
|
|
reg = <0x10050000 0x5000>;
|
|
};
|
|
|
|
watchdog@101D0000 {
|
|
compatible = "samsung,exynos5250-wdt";
|
|
reg = <0x101D0000 0x100>;
|
|
interrupts = <0 42 0>;
|
|
clocks = <&clock CLK_WDT>;
|
|
clock-names = "watchdog";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
g2d@10850000 {
|
|
compatible = "samsung,exynos5250-g2d";
|
|
reg = <0x10850000 0x1000>;
|
|
interrupts = <0 91 0>;
|
|
clocks = <&clock CLK_G2D>;
|
|
clock-names = "fimg2d";
|
|
};
|
|
|
|
codec@11000000 {
|
|
compatible = "samsung,mfc-v6";
|
|
reg = <0x11000000 0x10000>;
|
|
interrupts = <0 96 0>;
|
|
samsung,power-domain = <&pd_mfc>;
|
|
clocks = <&clock CLK_MFC>;
|
|
clock-names = "mfc";
|
|
};
|
|
|
|
rtc@101E0000 {
|
|
clocks = <&clock CLK_RTC>;
|
|
clock-names = "rtc";
|
|
status = "disabled";
|
|
};
|
|
|
|
tmu@10060000 {
|
|
compatible = "samsung,exynos5250-tmu";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <0 65 0>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
};
|
|
|
|
serial@12C00000 {
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
serial@12C10000 {
|
|
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
serial@12C20000 {
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
serial@12C30000 {
|
|
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
sata@122F0000 {
|
|
compatible = "snps,dwc-ahci";
|
|
samsung,sata-freq = <66>;
|
|
reg = <0x122F0000 0x1ff>;
|
|
interrupts = <0 115 0>;
|
|
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
|
|
clock-names = "sata", "sclk_sata";
|
|
phys = <&sata_phy>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
sata_phy: sata-phy@12170000 {
|
|
compatible = "samsung,exynos5250-sata-phy";
|
|
reg = <0x12170000 0x1ff>;
|
|
clocks = <&clock CLK_SATA_PHYCTRL>;
|
|
clock-names = "sata_phyctrl";
|
|
#phy-cells = <0>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_0: i2c@12C60000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C60000 0x100>;
|
|
interrupts = <0 56 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_1: i2c@12C70000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C70000 0x100>;
|
|
interrupts = <0 57 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_2: i2c@12C80000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C80000 0x100>;
|
|
interrupts = <0 58 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_3: i2c@12C90000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12C90000 0x100>;
|
|
interrupts = <0 59 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_4: i2c@12CA0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CA0000 0x100>;
|
|
interrupts = <0 60 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C4>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_5: i2c@12CB0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CB0000 0x100>;
|
|
interrupts = <0 61 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C5>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_6: i2c@12CC0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CC0000 0x100>;
|
|
interrupts = <0 62 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C6>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_7: i2c@12CD0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CD0000 0x100>;
|
|
interrupts = <0 63 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C7>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_8: i2c@12CE0000 {
|
|
compatible = "samsung,s3c2440-hdmiphy-i2c";
|
|
reg = <0x12CE0000 0x1000>;
|
|
interrupts = <0 64 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C_HDMI>;
|
|
clock-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_9: i2c@121D0000 {
|
|
compatible = "samsung,exynos5-sata-phy-i2c";
|
|
reg = <0x121D0000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SATA_PHYI2C>;
|
|
clock-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@12d20000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d20000 0x100>;
|
|
interrupts = <0 66 0>;
|
|
dmas = <&pdma0 5
|
|
&pdma0 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
};
|
|
|
|
spi_1: spi@12d30000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d30000 0x100>;
|
|
interrupts = <0 67 0>;
|
|
dmas = <&pdma1 5
|
|
&pdma1 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
};
|
|
|
|
spi_2: spi@12d40000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d40000 0x100>;
|
|
interrupts = <0 68 0>;
|
|
dmas = <&pdma0 7
|
|
&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus>;
|
|
};
|
|
|
|
mmc_0: mmc@12200000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <0 75 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12200000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_1: mmc@12210000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <0 76 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12210000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_2: mmc@12220000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <0 77 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12220000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_3: mmc@12230000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
reg = <0x12230000 0x1000>;
|
|
interrupts = <0 78 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
compatible = "samsung,s5pv210-i2s";
|
|
status = "disabled";
|
|
reg = <0x03830000 0x100>;
|
|
dmas = <&pdma0 10
|
|
&pdma0 9
|
|
&pdma0 8>;
|
|
dma-names = "tx", "rx", "tx-sec";
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_SCLK_I2S>;
|
|
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
|
samsung,idma-addr = <0x03000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
};
|
|
|
|
i2s1: i2s@12D60000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
status = "disabled";
|
|
reg = <0x12D60000 0x100>;
|
|
dmas = <&pdma1 12
|
|
&pdma1 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1_bus>;
|
|
};
|
|
|
|
i2s2: i2s@12D70000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
status = "disabled";
|
|
reg = <0x12D70000 0x100>;
|
|
dmas = <&pdma0 12
|
|
&pdma0 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s2_bus>;
|
|
};
|
|
|
|
usb@12000000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USB3>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dwc3 {
|
|
compatible = "synopsys,dwc3";
|
|
reg = <0x12000000 0x10000>;
|
|
interrupts = <0 72 0>;
|
|
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy: phy@12100000 {
|
|
compatible = "samsung,exynos5250-usbdrd-phy";
|
|
reg = <0x12100000 0x100>;
|
|
clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
usb@12110000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12110000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USB2>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy_gen 1>;
|
|
};
|
|
};
|
|
|
|
usb@12120000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12120000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock CLK_USB2>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy_gen 1>;
|
|
};
|
|
};
|
|
|
|
usb2_phy: usbphy@12130000 {
|
|
compatible = "samsung,exynos5250-usb2phy";
|
|
reg = <0x12130000 0x100>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
|
|
clock-names = "ext_xtal", "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbphy-sys {
|
|
reg = <0x10040704 0x8>,
|
|
<0x10050230 0x4>;
|
|
};
|
|
};
|
|
|
|
usb2_phy_gen: phy@12130000 {
|
|
compatible = "samsung,exynos5250-usb2-phy";
|
|
reg = <0x12130000 0x100>;
|
|
clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
pwm: pwm@12dd0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x12dd0000 0x100>;
|
|
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&clock CLK_PWM>;
|
|
clock-names = "timers";
|
|
};
|
|
|
|
amba {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "arm,amba-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
pdma0: pdma@121A0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121A0000 0x1000>;
|
|
interrupts = <0 34 0>;
|
|
clocks = <&clock CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@121B0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121B0000 0x1000>;
|
|
interrupts = <0 35 0>;
|
|
clocks = <&clock CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
mdma0: mdma@10800000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10800000 0x1000>;
|
|
interrupts = <0 33 0>;
|
|
clocks = <&clock CLK_MDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
|
|
mdma1: mdma@11C10000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x11C10000 0x1000>;
|
|
interrupts = <0 124 0>;
|
|
clocks = <&clock CLK_MDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
};
|
|
|
|
gsc_0: gsc@13e00000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e00000 0x1000>;
|
|
interrupts = <0 85 0>;
|
|
samsung,power-domain = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL0>;
|
|
clock-names = "gscl";
|
|
};
|
|
|
|
gsc_1: gsc@13e10000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e10000 0x1000>;
|
|
interrupts = <0 86 0>;
|
|
samsung,power-domain = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL1>;
|
|
clock-names = "gscl";
|
|
};
|
|
|
|
gsc_2: gsc@13e20000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e20000 0x1000>;
|
|
interrupts = <0 87 0>;
|
|
samsung,power-domain = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL2>;
|
|
clock-names = "gscl";
|
|
};
|
|
|
|
gsc_3: gsc@13e30000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e30000 0x1000>;
|
|
interrupts = <0 88 0>;
|
|
samsung,power-domain = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL3>;
|
|
clock-names = "gscl";
|
|
};
|
|
|
|
hdmi {
|
|
compatible = "samsung,exynos4212-hdmi";
|
|
reg = <0x14530000 0x70000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
|
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
|
<&clock CLK_MOUT_HDMI>;
|
|
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
|
"sclk_hdmiphy", "mout_hdmi";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
mixer {
|
|
compatible = "samsung,exynos5250-mixer";
|
|
reg = <0x14450000 0x10000>;
|
|
interrupts = <0 94 0>;
|
|
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
|
|
clock-names = "mixer", "sclk_hdmi";
|
|
};
|
|
|
|
dp_phy: video-phy@10040720 {
|
|
compatible = "samsung,exynos5250-dp-video-phy";
|
|
reg = <0x10040720 4>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
dp-controller@145B0000 {
|
|
clocks = <&clock CLK_DP>;
|
|
clock-names = "dp";
|
|
phys = <&dp_phy>;
|
|
phy-names = "dp";
|
|
};
|
|
|
|
fimd@14400000 {
|
|
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
};
|
|
|
|
adc: adc@12D10000 {
|
|
compatible = "samsung,exynos-adc-v1";
|
|
reg = <0x12D10000 0x100>, <0x10040718 0x4>;
|
|
interrupts = <0 106 0>;
|
|
clocks = <&clock CLK_ADC>;
|
|
clock-names = "adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
status = "disabled";
|
|
};
|
|
|
|
sss@10830000 {
|
|
compatible = "samsung,exynos4210-secss";
|
|
reg = <0x10830000 0x10000>;
|
|
interrupts = <0 112 0>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
};
|