leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d76e15fb20
linux/arch/arm/mach-omap2/pm.c
Rafael J. Wysocki e6c5eb9541 PM: Rework struct platform_suspend_ops 
There is no reason why the .prepare() and .finish() methods in 'struct
platform_suspend_ops' should take any arguments, since architectures don't use
these methods' argument in any practically meaningful way (ie.  either the
target system sleep state is conveyed to the platform by .set_target(), or
there is only one suspend state supported and it is indicated to the PM core
by .valid(), or .prepare() and .finish() aren't defined at all).   There also
is no reason why .finish() should return any result.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00

388 lines
8.9 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/pm.c
*
* OMAP2 Power Management Routines
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Based on pm.c for omap1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
#include "prcm-regs.h"
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
extern void __init pmdomain_init(void);
extern void pmdomain_set_autoidle(void);
static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
omap2_sram_idle();
local_fiq_enable();
local_irq_enable();
}
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
return 0;
}
#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
static void omap2_pm_debug(char * desc)
{
printk("%s:\n", desc);
preg(CM_CLKSTCTRL_MPU);
preg(CM_CLKSTCTRL_CORE);
preg(CM_CLKSTCTRL_GFX);
preg(CM_CLKSTCTRL_DSP);
preg(CM_CLKSTCTRL_MDM);
preg(PM_PWSTCTRL_MPU);
preg(PM_PWSTCTRL_CORE);
preg(PM_PWSTCTRL_GFX);
preg(PM_PWSTCTRL_DSP);
preg(PM_PWSTCTRL_MDM);
preg(PM_PWSTST_MPU);
preg(PM_PWSTST_CORE);
preg(PM_PWSTST_GFX);
preg(PM_PWSTST_DSP);
preg(PM_PWSTST_MDM);
preg(CM_AUTOIDLE1_CORE);
preg(CM_AUTOIDLE2_CORE);
preg(CM_AUTOIDLE3_CORE);
preg(CM_AUTOIDLE4_CORE);
preg(CM_AUTOIDLE_WKUP);
preg(CM_AUTOIDLE_PLL);
preg(CM_AUTOIDLE_DSP);
preg(CM_AUTOIDLE_MDM);
preg(CM_ICLKEN1_CORE);
preg(CM_ICLKEN2_CORE);
preg(CM_ICLKEN3_CORE);
preg(CM_ICLKEN4_CORE);
preg(CM_ICLKEN_GFX);
preg(CM_ICLKEN_WKUP);
preg(CM_ICLKEN_DSP);
preg(CM_ICLKEN_MDM);
preg(CM_IDLEST1_CORE);
preg(CM_IDLEST2_CORE);
preg(CM_IDLEST3_CORE);
preg(CM_IDLEST4_CORE);
preg(CM_IDLEST_GFX);
preg(CM_IDLEST_WKUP);
preg(CM_IDLEST_CKGEN);
preg(CM_IDLEST_DSP);
preg(CM_IDLEST_MDM);
preg(RM_RSTST_MPU);
preg(RM_RSTST_GFX);
preg(RM_RSTST_WKUP);
preg(RM_RSTST_DSP);
preg(RM_RSTST_MDM);
preg(PM_WKDEP_MPU);
preg(PM_WKDEP_CORE);
preg(PM_WKDEP_GFX);
preg(PM_WKDEP_DSP);
preg(PM_WKDEP_MDM);
preg(CM_FCLKEN_WKUP);
preg(CM_ICLKEN_WKUP);
preg(CM_IDLEST_WKUP);
preg(CM_AUTOIDLE_WKUP);
preg(CM_CLKSEL_WKUP);
preg(PM_WKEN_WKUP);
preg(PM_WKST_WKUP);
}
static inline void omap2_pm_save_registers(void)
{
/* Save interrupt registers */
OMAP24XX_SAVE(INTC_MIR0);
OMAP24XX_SAVE(INTC_MIR1);
OMAP24XX_SAVE(INTC_MIR2);
/* Save power control registers */
OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
/* Save power state registers */
OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
/* Save autoidle registers */
OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
/* Save idle state registers */
OMAP24XX_SAVE(CM_IDLEST1_CORE);
OMAP24XX_SAVE(CM_IDLEST2_CORE);
OMAP24XX_SAVE(CM_IDLEST3_CORE);
OMAP24XX_SAVE(CM_IDLEST4_CORE);
OMAP24XX_SAVE(CM_IDLEST_GFX);
OMAP24XX_SAVE(CM_IDLEST_WKUP);
OMAP24XX_SAVE(CM_IDLEST_CKGEN);
OMAP24XX_SAVE(CM_IDLEST_DSP);
OMAP24XX_SAVE(CM_IDLEST_MDM);
/* Save clock registers */
OMAP24XX_SAVE(CM_FCLKEN1_CORE);
OMAP24XX_SAVE(CM_FCLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN1_CORE);
OMAP24XX_SAVE(CM_ICLKEN2_CORE);
OMAP24XX_SAVE(CM_ICLKEN3_CORE);
OMAP24XX_SAVE(CM_ICLKEN4_CORE);
}
static inline void omap2_pm_restore_registers(void)
{
/* Restore clock state registers */
OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
/* Restore power state registers */
OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
/* Restore idle state registers */
OMAP24XX_RESTORE(CM_IDLEST1_CORE);
OMAP24XX_RESTORE(CM_IDLEST2_CORE);
OMAP24XX_RESTORE(CM_IDLEST3_CORE);
OMAP24XX_RESTORE(CM_IDLEST4_CORE);
OMAP24XX_RESTORE(CM_IDLEST_GFX);
OMAP24XX_RESTORE(CM_IDLEST_WKUP);
OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
OMAP24XX_RESTORE(CM_IDLEST_DSP);
OMAP24XX_RESTORE(CM_IDLEST_MDM);
/* Restore autoidle registers */
OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
/* Restore clock registers */
OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
/* REVISIT: Clear interrupts here */
/* Restore interrupt registers */
OMAP24XX_RESTORE(INTC_MIR0);
OMAP24XX_RESTORE(INTC_MIR1);
OMAP24XX_RESTORE(INTC_MIR2);
}
static int omap2_pm_suspend(void)
{
int processor_type = 0;
/* REVISIT: 0x21 or 0x26? */
if (cpu_is_omap2420())
processor_type = 0x21;
if (!processor_type)
return -ENOTSUPP;
local_irq_disable();
local_fiq_disable();
omap2_pm_save_registers();
/* Disable interrupts except for the wake events */
INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
pmdomain_set_autoidle();
/* Clear old wake-up events */
PM_WKST1_CORE = 0;
PM_WKST2_CORE = 0;
PM_WKST_WKUP = 0;
/* Enable wake-up events */
PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
PM_WKEN2_CORE = (1 << 2); /* UART3 */
PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
* in the SRAM suspend code */
CM_FCLKEN1_CORE = 0;
CM_FCLKEN2_CORE = 0;
CM_ICLKEN1_CORE = 0;
CM_ICLKEN3_CORE = 0;
CM_ICLKEN4_CORE = 0;
omap2_pm_debug("Status before suspend");
/* Must wait for serial buffers to clear */
mdelay(200);
/* Jump to SRAM suspend code
* REVISIT: When is this SDRC_DLLB_CTRL?
*/
omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
/* Back from sleep */
omap2_pm_restore_registers();
local_fiq_enable();
local_irq_enable();
return 0;
}
static int omap2_pm_enter(suspend_state_t state)
{
int ret = 0;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap2_pm_suspend();
break;
default:
ret = -EINVAL;
}
return ret;
}
static void omap2_pm_finish(void)
{
pm_idle = saved_idle;
}
static struct platform_suspend_ops omap_pm_ops = {
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
.valid = suspend_valid_only_mem,
};
int __init omap2_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
vclk = clk_get(NULL, "virt_prcm_set");
if (IS_ERR(vclk)) {
printk(KERN_ERR "Could not get PM vclk\n");
return -ENODEV;
}
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
omap24xx_idle_loop_suspend_sz);
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
omap24xx_cpu_suspend_sz);
suspend_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
pmdomain_init();
return 0;
}
__initcall(omap2_pm_init);
Reference in New Issue View Git Blame Copy Permalink