Olivier Moysan d716204fd5 iio: adc: stm32-dfsdm: add fast mode support ... The use of fast mode allows to get a larger set of solution for filter parameters. This can be useful to reach a better output sample resolution, when fast mode can be used. Fast mode is selected at startup if it is relevant. The startup is performed in postenable callback context, where there are too tight time constraints for filter parameters computation. For this reason both fast and non fast filter parameters are pre-computed previously. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2019-06-22 10:29:19 +01:00
..
accel	iio: sca3000: Potential endian bug in sca3000_read_event_value()	2019-06-22 09:40:36 +01:00
adc	iio: adc: stm32-dfsdm: add fast mode support	2019-06-22 10:29:19 +01:00
afe
amplifiers	iio: amplifiers: ad8366: Add support for ADL5240 VGA	2019-06-17 21:06:48 +01:00
buffer	iio: buffer: Switch to bitmap_zalloc()	2019-04-04 20:19:51 +01:00
chemical	Merge 5.1-rc6 into staging-next	2019-04-21 23:18:44 +02:00
common	iio: cros_ec: add 'id' sysfs entry	2019-04-27 14:11:59 +01:00
dac	iio: dac: ds4422/ds4424 drop of_node check	2019-05-11 12:19:35 +01:00
dummy	iio: dummy_evgen: fix possible memleak in evgen init	2019-04-22 11:45:03 +01:00
frequency	iio: frequency: adf4371: Add support for ADF4371 PLL	2019-06-17 21:06:45 +01:00
gyro	Second set of IIO new device support, features and cleanup for the 5.2 cycle.	2019-04-25 10:50:51 +02:00
health
humidity	iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor	2019-06-17 21:06:49 +01:00
imu	iio: imu: st_lsm6dsx: get device name from st_lsm6dsx_sensor_settings	2019-06-17 21:06:45 +01:00
light	iio: light: stk3310: Add support for stk3335	2019-06-17 21:06:44 +01:00
magnetometer	iio: hmc5843: fix potential NULL pointer dereferences	2019-04-04 20:20:14 +01:00
multiplexer
orientation
potentiometer	drivers: iio: Kconfig: pedantic cleanup	2019-04-04 20:19:56 +01:00
potentiostat	iio:potentiostat:lmp91000: change dev_err message	2019-04-04 20:19:55 +01:00
pressure	iio: dps310: Add pressure sensing capability	2019-06-08 12:33:32 +01:00
proximity	Kconfig: change configuration of srf04 ultrasonic iio sensor	2019-04-14 14:08:48 +01:00
resolver	staging:iio:ad2s90: Move out of staging	2018-12-01 15:40:39 +00:00
temperature	iio: temperature: maxim_thermocouple: declare missing of table	2019-04-27 13:54:40 +01:00
trigger	iio: remove redundant unlikely annotation	2019-04-04 20:19:40 +01:00
iio_core_trigger.h
iio_core.h
industrialio-buffer.c	Merge 5.1-rc6 into staging-next	2019-04-21 23:18:44 +02:00
industrialio-configfs.c
industrialio-core.c	iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.	2019-06-17 21:06:44 +01:00
industrialio-event.c
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: Print an error if there is no available irq	2019-04-04 20:19:41 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: Convert iio_read_avail_channel_raw into a wrapper	2019-04-14 11:32:20 +01:00
Kconfig	Staging / IIO driver patches for 5.2-rc1	2019-05-07 13:31:29 -07:00
Makefile	counter: stm32-lptimer: add counter device	2019-04-25 21:33:41 +02:00