linux/arch/powerpc
Paul Mackerras d6a4f70909 powerpc/powernv: Don't call generic code on offline cpus
On PowerNV platforms, when a CPU is offline, we put it into nap mode.
It's possible that the CPU wakes up from nap mode while it is still
offline due to a stray IPI.  A misdirected device interrupt could also
potentially cause it to wake up.  In that circumstance, we need to clear
the interrupt so that the CPU can go back to nap mode.

In the past the clearing of the interrupt was accomplished by briefly
enabling interrupts and allowing the normal interrupt handling code
(do_IRQ() etc.) to handle the interrupt.  This has the problem that
this code calls irq_enter() and irq_exit(), which call functions such
as account_system_vtime() which use RCU internally.  Use of RCU is not
permitted on offline CPUs and will trigger errors if RCU checking is
enabled.

To avoid calling into any generic code which might use RCU, we adopt
a different method of clearing interrupts on offline CPUs.  Since we
are on the PowerNV platform, we know that the system interrupt
controller is a XICS being driven directly (i.e. not via hcalls) by
the kernel.  Hence this adds a new icp_native_flush_interrupt()
function to the native-mode XICS driver and arranges to call that
when an offline CPU is woken from nap.  This new function reads the
interrupt from the XICS.  If it is an IPI, it clears the IPI; if it
is a device interrupt, it prints a warning and disables the source.
Then it does the end-of-interrupt processing for the interrupt.

The other thing that briefly enabling interrupts did was to check and
clear the irq_happened flag in this CPU's PACA.  Therefore, after
flushing the interrupt from the XICS, we also clear all bits except
the PACA_IRQ_HARD_DIS (interrupts are hard disabled) bit from the
irq_happened flag.  The PACA_IRQ_HARD_DIS flag is set by power7_nap()
and is left set to indicate that interrupts are hard disabled.  This
means we then have to ignore that flag in power7_nap(), which is
reasonable since it doesn't indicate that any interrupt event needs
servicing.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25 23:14:50 +10:00
..
boot powerpc/boot: Don't install zImage.* from make install 2014-09-25 23:14:34 +10:00
configs powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs 2014-09-09 19:02:46 +10:00
crypto
include powerpc/powernv: Don't call generic code on offline cpus 2014-09-25 23:14:50 +10:00
kernel powerpc/powernv: Don't call generic code on offline cpus 2014-09-25 23:14:50 +10:00
kvm powerpc/kvm/cma: Fix panic introduces by signed shift operation 2014-09-03 10:34:07 +02:00
lib powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
math-emu powerpc: Correct emulated mtfsf instruction 2014-04-07 10:33:11 +10:00
mm powerpc: Move htab_remove_mapping function prototype into header file 2014-09-25 23:14:44 +10:00
net net: filter: split 'struct sk_filter' into socket and bpf parts 2014-08-02 15:03:58 -07:00
oprofile powerpc: Ensure global functions include their prototype 2014-09-25 23:14:42 +10:00
perf powerpc: Make a bunch of things static 2014-09-25 23:14:41 +10:00
platforms powerpc/powernv: Don't call generic code on offline cpus 2014-09-25 23:14:50 +10:00
sysdev powerpc/powernv: Don't call generic code on offline cpus 2014-09-25 23:14:50 +10:00
xmon powerpc: Hard disable interrupts in xmon 2014-08-13 15:13:48 +10:00
Kconfig powerpc: Fix build error with CONFIG_PCI=n 2014-09-25 23:14:35 +10:00
Kconfig.debug Patch queue for ppc - 2014-08-01 2014-08-05 09:58:11 +02:00
Makefile powerpc: Add POWER8 CPU selection 2014-09-25 23:14:49 +10:00
relocs_check.pl