linux/Documentation/devicetree/bindings/mtd/denali-nand.txt
Masahiro Yamada 60d920d32c mtd: nand: denali_dt: remove dma-mask DT property
The driver sets appropriate DMA mask.  Delete the "dma-mask" DT
property.  See [1] for negative comments for this binding.

[1] https://lkml.org/lkml/2016/2/8/57

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-04-25 14:18:36 +02:00

23 lines
714 B
Plaintext

* Denali NAND controller
Required properties:
- compatible : should be one of the following:
"altr,socfpga-denali-nand" - for Altera SOCFPGA
- reg : should contain registers location and length for data and reg.
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
- interrupts : The interrupt number.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
Examples:
nand: nand@ff900000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,socfpga-denali-nand";
reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 144 4>;
};