linux/arch/arm/mach-omap1
Russell King d0d42df2a4 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel
* at91: (24 commits)
  [ARM] 4615/4: sam926[13]ek buttons updated
  [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
  [ARM] 4764/1: [AT91] AT91CAP9 core support
  [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
  [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
  [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
  [ARM] 4759/1: [AT91] Buttons on CSB300
  [ARM] 4758/1: [AT91] LEDs
  [ARM] 4757/1: [AT91] UART initialization
  [ARM] 4756/1: [AT91] Makefile cleanup
  [ARM] 4755/1: [AT91] NAND update
  [ARM] 4754/1: [AT91] SSC library support
  [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
  [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
  [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
  [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
  [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
  [ARM] 4646/1: AT91: configurable HZ, default to 128
  [ARM] 4688/1: at91: speed-up irq processing
  [ARM] 4657/1: AT91: Header definition update
  ...

* ep93xx:
  [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
  [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
  [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
  [ARM] 4668/1: ep93xx: implement new GPIO API

* iop:
  [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
  [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
  [ARM] 4708/1: iop: update defconfigs for 2.6.24

* kprobes:
  ARM kprobes: let's enable it
  ARM kprobes: special hook for the kprobes breakpoint handler
  ARM kprobes: prevent some functions involved with kprobes from being probed
  ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
  ARM kprobes: add the kprobes hook to the page fault handler
  ARM kprobes: core code
  ARM kprobes: instruction single-stepping support

* ks8695:
  [ARM] 4603/1: KS8695: debugfs interface to view pin state
  [ARM] 4601/1: KS8695: PCI support

* misc:
  [ARM] remove duplicate includes
  [ARM] CONFIG_DEBUG_STACK_USAGE
  [ARM] 4689/1: small comment wrap fix
  [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
  [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
  [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
  [SERIAL] 21285: Report baud rate back via termios
  [ARM] Remove pointless casts from void pointers,
  [ARM] Misc minor interrupt handler cleanups
  [ARM] Remove at91_lcdc.h
  [ARM] ARRAY_SIZE() cleanup
  [ARM] Update mach-types

* msm:
  [ARM] msm: dma support for MSM7X00A
  [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
  [ARM] msm: irq and timer support for ARCH_MSM7X00A
  [ARM] msm: core platform support for ARCH_MSM7X00A

* s3c2410: (33 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

* sa1100:
  [ARM] sa1100: add clock source support

* vfp:
  [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
  [ARM] 4583/1: ARMv7: Add VFPv3 support
  [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28 13:21:21 +00:00
..
board-ams-delta.c ARM: OMAP: Sync board specific files with linux-omap 2007-09-20 18:34:50 -07:00
board-fsample.c ARM: OMAP1: Keymap fix for f-sample and p2-sample 2008-01-18 15:52:15 -08:00
board-generic.c [ARM] 3433/1: ARM: OMAP: 8/8 Update board files 2006-04-02 17:46:30 +01:00
board-h2.c i2c/tps65010: move header to <linux/i2c/...> 2008-01-27 18:14:49 +01:00
board-h3.c i2c/tps65010: move header to <linux/i2c/...> 2008-01-27 18:14:49 +01:00
board-innovator.c ARM: OMAP: gpio init section cleanups 2007-05-08 20:20:37 +01:00
board-nokia770.c [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
board-osk.c Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
board-palmte.c ARM: OMAP: Sync board specific files with linux-omap 2007-09-20 18:34:50 -07:00
board-palmtt.c [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
board-palmz71.c [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
board-perseus2.c ARM: OMAP1: Keymap fix for f-sample and p2-sample 2008-01-18 15:52:15 -08:00
board-sx1.c ARM: OMAP: Basic support for siemens sx1 2007-09-20 18:34:50 -07:00
board-voiceblue.c ARM: OMAP: Sync board specific files with linux-omap 2007-09-20 18:34:50 -07:00
clock.c ARM: OMAP: add SoSSI clock 2007-09-20 18:34:49 -07:00
clock.h ARM: OMAP: add SoSSI clock 2007-09-20 18:34:49 -07:00
devices.c ARM: OMAP: Sync core code with linux-omap 2007-05-08 20:36:31 +01:00
fpga.c [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
id.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
io.c ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations) 2007-05-09 10:39:14 +01:00
irq.c Convert files to UTF-8 and some cleanups 2007-10-19 23:21:04 +02:00
Kconfig ARM: OMAP: Basic support for siemens sx1 2007-09-20 18:34:50 -07:00
leds-h2p2-debug.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
leds-innovator.c [ARM] omap1/leds-innovator.c: remove dead code 2007-10-12 23:43:20 +01:00
leds-osk.c i2c/tps65010: move header to <linux/i2c/...> 2008-01-27 18:14:49 +01:00
leds.c [ARM] 3141/1: OMAP 1/5: Update omap1 specific files 2005-11-10 14:26:48 +00:00
leds.h [PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory 2005-07-10 19:58:10 +01:00
mailbox.c ARM: OMAP: Add mailbox support for IVA 2007-05-09 10:37:10 +01:00
Makefile ARM: OMAP: Basic support for siemens sx1 2007-09-20 18:34:50 -07:00
Makefile.boot [PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2 2005-07-10 19:58:08 +01:00
mux.c ARM: OMAP: omap camera builds again; Mistral init and mux 2007-09-20 18:34:49 -07:00
pm.c [ARM] Misc minor interrupt handler cleanups 2008-01-26 14:49:59 +00:00
serial.c ARM: OMAP: OMAP310 Serial 2007-03-02 01:47:09 -08:00
sleep.S Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
time.c clockevents: fix resume logic 2007-07-21 17:49:15 -07:00