forked from Minki/linux
8116e8dd56
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
522 lines
12 KiB
C
522 lines
12 KiB
C
/*
|
|
* Driver for Linear Technology LTC4245 I2C Multiple Supply Hot Swap Controller
|
|
*
|
|
* Copyright (C) 2008 Ira W. Snyder <iws@ovro.caltech.edu>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This driver is based on the ds1621 and ina209 drivers.
|
|
*
|
|
* Datasheet:
|
|
* http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/platform_data/ltc4245.h>
|
|
|
|
/* Here are names of the chip's registers (a.k.a. commands) */
|
|
enum ltc4245_cmd {
|
|
LTC4245_STATUS = 0x00, /* readonly */
|
|
LTC4245_ALERT = 0x01,
|
|
LTC4245_CONTROL = 0x02,
|
|
LTC4245_ON = 0x03,
|
|
LTC4245_FAULT1 = 0x04,
|
|
LTC4245_FAULT2 = 0x05,
|
|
LTC4245_GPIO = 0x06,
|
|
LTC4245_ADCADR = 0x07,
|
|
|
|
LTC4245_12VIN = 0x10,
|
|
LTC4245_12VSENSE = 0x11,
|
|
LTC4245_12VOUT = 0x12,
|
|
LTC4245_5VIN = 0x13,
|
|
LTC4245_5VSENSE = 0x14,
|
|
LTC4245_5VOUT = 0x15,
|
|
LTC4245_3VIN = 0x16,
|
|
LTC4245_3VSENSE = 0x17,
|
|
LTC4245_3VOUT = 0x18,
|
|
LTC4245_VEEIN = 0x19,
|
|
LTC4245_VEESENSE = 0x1a,
|
|
LTC4245_VEEOUT = 0x1b,
|
|
LTC4245_GPIOADC = 0x1c,
|
|
};
|
|
|
|
struct ltc4245_data {
|
|
struct i2c_client *client;
|
|
|
|
struct mutex update_lock;
|
|
bool valid;
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
/* Control registers */
|
|
u8 cregs[0x08];
|
|
|
|
/* Voltage registers */
|
|
u8 vregs[0x0d];
|
|
|
|
/* GPIO ADC registers */
|
|
bool use_extra_gpios;
|
|
int gpios[3];
|
|
};
|
|
|
|
/*
|
|
* Update the readings from the GPIO pins. If the driver has been configured to
|
|
* sample all GPIO's as analog voltages, a round-robin sampling method is used.
|
|
* Otherwise, only the configured GPIO pin is sampled.
|
|
*
|
|
* LOCKING: must hold data->update_lock
|
|
*/
|
|
static void ltc4245_update_gpios(struct device *dev)
|
|
{
|
|
struct ltc4245_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
u8 gpio_curr, gpio_next, gpio_reg;
|
|
int i;
|
|
|
|
/* no extra gpio support, we're basically done */
|
|
if (!data->use_extra_gpios) {
|
|
data->gpios[0] = data->vregs[LTC4245_GPIOADC - 0x10];
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the last reading was too long ago, then we mark all old GPIO
|
|
* readings as stale by setting them to -EAGAIN
|
|
*/
|
|
if (time_after(jiffies, data->last_updated + 5 * HZ)) {
|
|
for (i = 0; i < ARRAY_SIZE(data->gpios); i++)
|
|
data->gpios[i] = -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* Get the current GPIO pin
|
|
*
|
|
* The datasheet calls these GPIO[1-3], but we'll calculate the zero
|
|
* based array index instead, and call them GPIO[0-2]. This is much
|
|
* easier to think about.
|
|
*/
|
|
gpio_curr = (data->cregs[LTC4245_GPIO] & 0xc0) >> 6;
|
|
if (gpio_curr > 0)
|
|
gpio_curr -= 1;
|
|
|
|
/* Read the GPIO voltage from the GPIOADC register */
|
|
data->gpios[gpio_curr] = data->vregs[LTC4245_GPIOADC - 0x10];
|
|
|
|
/* Find the next GPIO pin to read */
|
|
gpio_next = (gpio_curr + 1) % ARRAY_SIZE(data->gpios);
|
|
|
|
/*
|
|
* Calculate the correct setting for the GPIO register so it will
|
|
* sample the next GPIO pin
|
|
*/
|
|
gpio_reg = (data->cregs[LTC4245_GPIO] & 0x3f) | ((gpio_next + 1) << 6);
|
|
|
|
/* Update the GPIO register */
|
|
i2c_smbus_write_byte_data(client, LTC4245_GPIO, gpio_reg);
|
|
|
|
/* Update saved data */
|
|
data->cregs[LTC4245_GPIO] = gpio_reg;
|
|
}
|
|
|
|
static struct ltc4245_data *ltc4245_update_device(struct device *dev)
|
|
{
|
|
struct ltc4245_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
s32 val;
|
|
int i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
|
|
/* Read control registers -- 0x00 to 0x07 */
|
|
for (i = 0; i < ARRAY_SIZE(data->cregs); i++) {
|
|
val = i2c_smbus_read_byte_data(client, i);
|
|
if (unlikely(val < 0))
|
|
data->cregs[i] = 0;
|
|
else
|
|
data->cregs[i] = val;
|
|
}
|
|
|
|
/* Read voltage registers -- 0x10 to 0x1c */
|
|
for (i = 0; i < ARRAY_SIZE(data->vregs); i++) {
|
|
val = i2c_smbus_read_byte_data(client, i+0x10);
|
|
if (unlikely(val < 0))
|
|
data->vregs[i] = 0;
|
|
else
|
|
data->vregs[i] = val;
|
|
}
|
|
|
|
/* Update GPIO readings */
|
|
ltc4245_update_gpios(dev);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/* Return the voltage from the given register in millivolts */
|
|
static int ltc4245_get_voltage(struct device *dev, u8 reg)
|
|
{
|
|
struct ltc4245_data *data = ltc4245_update_device(dev);
|
|
const u8 regval = data->vregs[reg - 0x10];
|
|
u32 voltage = 0;
|
|
|
|
switch (reg) {
|
|
case LTC4245_12VIN:
|
|
case LTC4245_12VOUT:
|
|
voltage = regval * 55;
|
|
break;
|
|
case LTC4245_5VIN:
|
|
case LTC4245_5VOUT:
|
|
voltage = regval * 22;
|
|
break;
|
|
case LTC4245_3VIN:
|
|
case LTC4245_3VOUT:
|
|
voltage = regval * 15;
|
|
break;
|
|
case LTC4245_VEEIN:
|
|
case LTC4245_VEEOUT:
|
|
voltage = regval * -55;
|
|
break;
|
|
case LTC4245_GPIOADC:
|
|
voltage = regval * 10;
|
|
break;
|
|
default:
|
|
/* If we get here, the developer messed up */
|
|
WARN_ON_ONCE(1);
|
|
break;
|
|
}
|
|
|
|
return voltage;
|
|
}
|
|
|
|
/* Return the current in the given sense register in milliAmperes */
|
|
static unsigned int ltc4245_get_current(struct device *dev, u8 reg)
|
|
{
|
|
struct ltc4245_data *data = ltc4245_update_device(dev);
|
|
const u8 regval = data->vregs[reg - 0x10];
|
|
unsigned int voltage;
|
|
unsigned int curr;
|
|
|
|
/*
|
|
* The strange looking conversions that follow are fixed-point
|
|
* math, since we cannot do floating point in the kernel.
|
|
*
|
|
* Step 1: convert sense register to microVolts
|
|
* Step 2: convert voltage to milliAmperes
|
|
*
|
|
* If you play around with the V=IR equation, you come up with
|
|
* the following: X uV / Y mOhm == Z mA
|
|
*
|
|
* With the resistors that are fractions of a milliOhm, we multiply
|
|
* the voltage and resistance by 10, to shift the decimal point.
|
|
* Now we can use the normal division operator again.
|
|
*/
|
|
|
|
switch (reg) {
|
|
case LTC4245_12VSENSE:
|
|
voltage = regval * 250; /* voltage in uV */
|
|
curr = voltage / 50; /* sense resistor 50 mOhm */
|
|
break;
|
|
case LTC4245_5VSENSE:
|
|
voltage = regval * 125; /* voltage in uV */
|
|
curr = (voltage * 10) / 35; /* sense resistor 3.5 mOhm */
|
|
break;
|
|
case LTC4245_3VSENSE:
|
|
voltage = regval * 125; /* voltage in uV */
|
|
curr = (voltage * 10) / 25; /* sense resistor 2.5 mOhm */
|
|
break;
|
|
case LTC4245_VEESENSE:
|
|
voltage = regval * 250; /* voltage in uV */
|
|
curr = voltage / 100; /* sense resistor 100 mOhm */
|
|
break;
|
|
default:
|
|
/* If we get here, the developer messed up */
|
|
WARN_ON_ONCE(1);
|
|
curr = 0;
|
|
break;
|
|
}
|
|
|
|
return curr;
|
|
}
|
|
|
|
/* Map from voltage channel index to voltage register */
|
|
|
|
static const s8 ltc4245_in_regs[] = {
|
|
LTC4245_12VIN, LTC4245_5VIN, LTC4245_3VIN, LTC4245_VEEIN,
|
|
LTC4245_12VOUT, LTC4245_5VOUT, LTC4245_3VOUT, LTC4245_VEEOUT,
|
|
};
|
|
|
|
/* Map from current channel index to current register */
|
|
|
|
static const s8 ltc4245_curr_regs[] = {
|
|
LTC4245_12VSENSE, LTC4245_5VSENSE, LTC4245_3VSENSE, LTC4245_VEESENSE,
|
|
};
|
|
|
|
static int ltc4245_read_curr(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct ltc4245_data *data = ltc4245_update_device(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
*val = ltc4245_get_current(dev, ltc4245_curr_regs[channel]);
|
|
return 0;
|
|
case hwmon_curr_max_alarm:
|
|
*val = !!(data->cregs[LTC4245_FAULT1] & BIT(channel + 4));
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int ltc4245_read_in(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct ltc4245_data *data = ltc4245_update_device(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
if (channel < 8) {
|
|
*val = ltc4245_get_voltage(dev,
|
|
ltc4245_in_regs[channel]);
|
|
} else {
|
|
int regval = data->gpios[channel - 8];
|
|
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = regval * 10;
|
|
}
|
|
return 0;
|
|
case hwmon_in_min_alarm:
|
|
if (channel < 4)
|
|
*val = !!(data->cregs[LTC4245_FAULT1] & BIT(channel));
|
|
else
|
|
*val = !!(data->cregs[LTC4245_FAULT2] &
|
|
BIT(channel - 4));
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int ltc4245_read_power(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
unsigned long curr;
|
|
long voltage;
|
|
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
(void)ltc4245_update_device(dev);
|
|
curr = ltc4245_get_current(dev, ltc4245_curr_regs[channel]);
|
|
voltage = ltc4245_get_voltage(dev, ltc4245_in_regs[channel]);
|
|
*val = abs(curr * voltage);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int ltc4245_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
|
|
switch (type) {
|
|
case hwmon_curr:
|
|
return ltc4245_read_curr(dev, attr, channel, val);
|
|
case hwmon_power:
|
|
return ltc4245_read_power(dev, attr, channel, val);
|
|
case hwmon_in:
|
|
return ltc4245_read_in(dev, attr, channel - 1, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t ltc4245_is_visible(const void *_data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct ltc4245_data *data = _data;
|
|
|
|
switch (type) {
|
|
case hwmon_in:
|
|
if (channel == 0)
|
|
return 0;
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
if (channel > 9 && !data->use_extra_gpios)
|
|
return 0;
|
|
return S_IRUGO;
|
|
case hwmon_in_min_alarm:
|
|
if (channel > 8)
|
|
return 0;
|
|
return S_IRUGO;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
case hwmon_curr_max_alarm:
|
|
return S_IRUGO;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_power:
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
return S_IRUGO;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static const u32 ltc4245_in_config[] = {
|
|
HWMON_I_INPUT, /* dummy, skipped in is_visible */
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_MIN_ALARM,
|
|
HWMON_I_INPUT,
|
|
HWMON_I_INPUT,
|
|
HWMON_I_INPUT,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info ltc4245_in = {
|
|
.type = hwmon_in,
|
|
.config = ltc4245_in_config,
|
|
};
|
|
|
|
static const u32 ltc4245_curr_config[] = {
|
|
HWMON_C_INPUT | HWMON_C_MAX_ALARM,
|
|
HWMON_C_INPUT | HWMON_C_MAX_ALARM,
|
|
HWMON_C_INPUT | HWMON_C_MAX_ALARM,
|
|
HWMON_C_INPUT | HWMON_C_MAX_ALARM,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info ltc4245_curr = {
|
|
.type = hwmon_curr,
|
|
.config = ltc4245_curr_config,
|
|
};
|
|
|
|
static const u32 ltc4245_power_config[] = {
|
|
HWMON_P_INPUT,
|
|
HWMON_P_INPUT,
|
|
HWMON_P_INPUT,
|
|
HWMON_P_INPUT,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info ltc4245_power = {
|
|
.type = hwmon_power,
|
|
.config = ltc4245_power_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *ltc4245_info[] = {
|
|
<c4245_in,
|
|
<c4245_curr,
|
|
<c4245_power,
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops ltc4245_hwmon_ops = {
|
|
.is_visible = ltc4245_is_visible,
|
|
.read = ltc4245_read,
|
|
};
|
|
|
|
static const struct hwmon_chip_info ltc4245_chip_info = {
|
|
.ops = <c4245_hwmon_ops,
|
|
.info = ltc4245_info,
|
|
};
|
|
|
|
static bool ltc4245_use_extra_gpios(struct i2c_client *client)
|
|
{
|
|
struct ltc4245_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct device_node *np = client->dev.of_node;
|
|
|
|
/* prefer platform data */
|
|
if (pdata)
|
|
return pdata->use_extra_gpios;
|
|
|
|
/* fallback on OF */
|
|
if (of_find_property(np, "ltc4245,use-extra-gpios", NULL))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int ltc4245_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
struct ltc4245_data *data;
|
|
struct device *hwmon_dev;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
mutex_init(&data->update_lock);
|
|
data->use_extra_gpios = ltc4245_use_extra_gpios(client);
|
|
|
|
/* Initialize the LTC4245 chip */
|
|
i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
|
|
i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(&client->dev,
|
|
client->name, data,
|
|
<c4245_chip_info,
|
|
NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ltc4245_id[] = {
|
|
{ "ltc4245", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc4245_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ltc4245_driver = {
|
|
.driver = {
|
|
.name = "ltc4245",
|
|
},
|
|
.probe = ltc4245_probe,
|
|
.id_table = ltc4245_id,
|
|
};
|
|
|
|
module_i2c_driver(ltc4245_driver);
|
|
|
|
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
|
|
MODULE_DESCRIPTION("LTC4245 driver");
|
|
MODULE_LICENSE("GPL");
|