forked from Minki/linux
ee4f6b4b89
The n_tracerouter and n_tracesink line discpline drivers use the Linux tty line discpline framework to route trace data coming from a tty port (say UART for example) to the trace sink line discipline driver and to another tty port(say USB). Those these two line discipline drivers can be used together, independently from pti.c, they are part of the original implementation solution of the MIPI P1149.7, compact JTAG, PTI solution for Intel mobile platforms starting with the Medfield platform. Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
353 lines
14 KiB
Plaintext
353 lines
14 KiB
Plaintext
config VT
|
|
bool "Virtual terminal" if EXPERT
|
|
depends on !S390
|
|
select INPUT
|
|
default y
|
|
---help---
|
|
If you say Y here, you will get support for terminal devices with
|
|
display and keyboard devices. These are called "virtual" because you
|
|
can run several virtual terminals (also called virtual consoles) on
|
|
one physical terminal. This is rather useful, for example one
|
|
virtual terminal can collect system messages and warnings, another
|
|
one can be used for a text-mode user session, and a third could run
|
|
an X session, all in parallel. Switching between virtual terminals
|
|
is done with certain key combinations, usually Alt-<function key>.
|
|
|
|
The setterm command ("man setterm") can be used to change the
|
|
properties (such as colors or beeping) of a virtual terminal. The
|
|
man page console_codes(4) ("man console_codes") contains the special
|
|
character sequences that can be used to change those properties
|
|
directly. The fonts used on virtual terminals can be changed with
|
|
the setfont ("man setfont") command and the key bindings are defined
|
|
with the loadkeys ("man loadkeys") command.
|
|
|
|
You need at least one virtual terminal device in order to make use
|
|
of your keyboard and monitor. Therefore, only people configuring an
|
|
embedded system would want to say N here in order to save some
|
|
memory; the only way to log into such a system is then via a serial
|
|
or network connection.
|
|
|
|
If unsure, say Y, or else you won't be able to do much with your new
|
|
shiny Linux system :-)
|
|
|
|
config CONSOLE_TRANSLATIONS
|
|
depends on VT
|
|
default y
|
|
bool "Enable character translations in console" if EXPERT
|
|
---help---
|
|
This enables support for font mapping and Unicode translation
|
|
on virtual consoles.
|
|
|
|
config VT_CONSOLE
|
|
bool "Support for console on virtual terminal" if EXPERT
|
|
depends on VT
|
|
default y
|
|
---help---
|
|
The system console is the device which receives all kernel messages
|
|
and warnings and which allows logins in single user mode. If you
|
|
answer Y here, a virtual terminal (the device used to interact with
|
|
a physical terminal) can be used as system console. This is the most
|
|
common mode of operations, so you should say Y here unless you want
|
|
the kernel messages be output only to a serial port (in which case
|
|
you should say Y to "Console on serial port", below).
|
|
|
|
If you do say Y here, by default the currently visible virtual
|
|
terminal (/dev/tty0) will be used as system console. You can change
|
|
that with a kernel command line option such as "console=tty3" which
|
|
would use the third virtual terminal as system console. (Try "man
|
|
bootparam" or see the documentation of your boot loader (lilo or
|
|
loadlin) about how to pass options to the kernel at boot time.)
|
|
|
|
If unsure, say Y.
|
|
|
|
config HW_CONSOLE
|
|
bool
|
|
depends on VT && !S390 && !UML
|
|
default y
|
|
|
|
config VT_HW_CONSOLE_BINDING
|
|
bool "Support for binding and unbinding console drivers"
|
|
depends on HW_CONSOLE
|
|
default n
|
|
---help---
|
|
The virtual terminal is the device that interacts with the physical
|
|
terminal through console drivers. On these systems, at least one
|
|
console driver is loaded. In other configurations, additional console
|
|
drivers may be enabled, such as the framebuffer console. If more than
|
|
1 console driver is enabled, setting this to 'y' will allow you to
|
|
select the console driver that will serve as the backend for the
|
|
virtual terminals.
|
|
|
|
See <file:Documentation/console/console.txt> for more
|
|
information. For framebuffer console users, please refer to
|
|
<file:Documentation/fb/fbcon.txt>.
|
|
|
|
config UNIX98_PTYS
|
|
bool "Unix98 PTY support" if EXPERT
|
|
default y
|
|
---help---
|
|
A pseudo terminal (PTY) is a software device consisting of two
|
|
halves: a master and a slave. The slave device behaves identical to
|
|
a physical terminal; the master device is used by a process to
|
|
read data from and write data to the slave, thereby emulating a
|
|
terminal. Typical programs for the master side are telnet servers
|
|
and xterms.
|
|
|
|
Linux has traditionally used the BSD-like names /dev/ptyxx for
|
|
masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
|
|
has a number of problems. The GNU C library glibc 2.1 and later,
|
|
however, supports the Unix98 naming standard: in order to acquire a
|
|
pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
|
|
terminal is then made available to the process and the pseudo
|
|
terminal slave can be accessed as /dev/pts/<number>. What was
|
|
traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
|
|
|
|
All modern Linux systems use the Unix98 ptys. Say Y unless
|
|
you're on an embedded system and want to conserve memory.
|
|
|
|
config DEVPTS_MULTIPLE_INSTANCES
|
|
bool "Support multiple instances of devpts"
|
|
depends on UNIX98_PTYS
|
|
default n
|
|
---help---
|
|
Enable support for multiple instances of devpts filesystem.
|
|
If you want to have isolated PTY namespaces (eg: in containers),
|
|
say Y here. Otherwise, say N. If enabled, each mount of devpts
|
|
filesystem with the '-o newinstance' option will create an
|
|
independent PTY namespace.
|
|
|
|
config LEGACY_PTYS
|
|
bool "Legacy (BSD) PTY support"
|
|
default y
|
|
---help---
|
|
A pseudo terminal (PTY) is a software device consisting of two
|
|
halves: a master and a slave. The slave device behaves identical to
|
|
a physical terminal; the master device is used by a process to
|
|
read data from and write data to the slave, thereby emulating a
|
|
terminal. Typical programs for the master side are telnet servers
|
|
and xterms.
|
|
|
|
Linux has traditionally used the BSD-like names /dev/ptyxx
|
|
for masters and /dev/ttyxx for slaves of pseudo
|
|
terminals. This scheme has a number of problems, including
|
|
security. This option enables these legacy devices; on most
|
|
systems, it is safe to say N.
|
|
|
|
|
|
config LEGACY_PTY_COUNT
|
|
int "Maximum number of legacy PTY in use"
|
|
depends on LEGACY_PTYS
|
|
range 0 256
|
|
default "256"
|
|
---help---
|
|
The maximum number of legacy PTYs that can be used at any one time.
|
|
The default is 256, and should be more than enough. Embedded
|
|
systems may want to reduce this to save memory.
|
|
|
|
When not in use, each legacy PTY occupies 12 bytes on 32-bit
|
|
architectures and 24 bytes on 64-bit architectures.
|
|
|
|
config BFIN_JTAG_COMM
|
|
tristate "Blackfin JTAG Communication"
|
|
depends on BLACKFIN
|
|
help
|
|
Add support for emulating a TTY device over the Blackfin JTAG.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bfin_jtag_comm.
|
|
|
|
config BFIN_JTAG_COMM_CONSOLE
|
|
bool "Console on Blackfin JTAG"
|
|
depends on BFIN_JTAG_COMM=y
|
|
|
|
config SERIAL_NONSTANDARD
|
|
bool "Non-standard serial port support"
|
|
depends on HAS_IOMEM
|
|
---help---
|
|
Say Y here if you have any non-standard serial boards -- boards
|
|
which aren't supported using the standard "dumb" serial driver.
|
|
This includes intelligent serial boards such as Cyclades,
|
|
Digiboards, etc. These are usually used for systems that need many
|
|
serial ports because they serve many terminals or dial-in
|
|
connections.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about non-standard serial boards.
|
|
|
|
Most people can say N here.
|
|
|
|
config ROCKETPORT
|
|
tristate "Comtrol RocketPort support"
|
|
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
|
|
help
|
|
This driver supports Comtrol RocketPort and RocketModem PCI boards.
|
|
These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
|
|
modems. For information about the RocketPort/RocketModem boards
|
|
and this driver read <file:Documentation/serial/rocket.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called rocket.
|
|
|
|
If you want to compile this driver into the kernel, say Y here. If
|
|
you don't have a Comtrol RocketPort/RocketModem card installed, say N.
|
|
|
|
config CYCLADES
|
|
tristate "Cyclades async mux support"
|
|
depends on SERIAL_NONSTANDARD && (PCI || ISA)
|
|
select FW_LOADER
|
|
---help---
|
|
This driver supports Cyclades Z and Y multiserial boards.
|
|
You would need something like this to connect more than two modems to
|
|
your Linux box, for instance in order to become a dial-in server.
|
|
|
|
For information about the Cyclades-Z card, read
|
|
<file:Documentation/serial/README.cycladesZ>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyclades.
|
|
|
|
If you haven't heard about it, it's safe to say N.
|
|
|
|
config CYZ_INTR
|
|
bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && CYCLADES
|
|
help
|
|
The Cyclades-Z family of multiport cards allows 2 (two) driver op
|
|
modes: polling and interrupt. In polling mode, the driver will check
|
|
the status of the Cyclades-Z ports every certain amount of time
|
|
(which is called polling cycle and is configurable). In interrupt
|
|
mode, it will use an interrupt line (IRQ) in order to check the
|
|
status of the Cyclades-Z ports. The default op mode is polling. If
|
|
unsure, say N.
|
|
|
|
config MOXA_INTELLIO
|
|
tristate "Moxa Intellio support"
|
|
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
|
|
select FW_LOADER
|
|
help
|
|
Say Y here if you have a Moxa Intellio multiport serial card.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called moxa.
|
|
|
|
config MOXA_SMARTIO
|
|
tristate "Moxa SmartIO support v. 2.0"
|
|
depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
|
|
help
|
|
Say Y here if you have a Moxa SmartIO multiport serial card and/or
|
|
want to help develop a new version of this driver.
|
|
|
|
This is upgraded (1.9.1) driver from original Moxa drivers with
|
|
changes finally resulting in PCI probing.
|
|
|
|
This driver can also be built as a module. The module will be called
|
|
mxser. If you want to do that, say M here.
|
|
|
|
config SYNCLINK
|
|
tristate "Microgate SyncLink card support"
|
|
depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
|
|
help
|
|
Provides support for the SyncLink ISA and PCI multiprotocol serial
|
|
adapters. These adapters support asynchronous and HDLC bit
|
|
synchronous communication up to 10Mbps (PCI adapter).
|
|
|
|
This driver can only be built as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want).
|
|
The module will be called synclink. If you want to do that, say M
|
|
here.
|
|
|
|
config SYNCLINKMP
|
|
tristate "SyncLink Multiport support"
|
|
depends on SERIAL_NONSTANDARD && PCI
|
|
help
|
|
Enable support for the SyncLink Multiport (2 or 4 ports)
|
|
serial adapter, running asynchronous and HDLC communications up
|
|
to 2.048Mbps. Each ports is independently selectable for
|
|
RS-232, V.35, RS-449, RS-530, and X.21
|
|
|
|
This driver may be built as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want).
|
|
The module will be called synclinkmp. If you want to do that, say M
|
|
here.
|
|
|
|
config SYNCLINK_GT
|
|
tristate "SyncLink GT/AC support"
|
|
depends on SERIAL_NONSTANDARD && PCI
|
|
help
|
|
Support for SyncLink GT and SyncLink AC families of
|
|
synchronous and asynchronous serial adapters
|
|
manufactured by Microgate Systems, Ltd. (www.microgate.com)
|
|
|
|
config NOZOMI
|
|
tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
|
|
depends on PCI && EXPERIMENTAL
|
|
help
|
|
If you have a HSDPA driver Broadband Wireless Data Card -
|
|
Globe Trotter PCMCIA card, say Y here.
|
|
|
|
To compile this driver as a module, choose M here, the module
|
|
will be called nozomi.
|
|
|
|
config ISI
|
|
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
|
|
depends on SERIAL_NONSTANDARD && PCI
|
|
select FW_LOADER
|
|
help
|
|
This is a driver for the Multi-Tech cards which provide several
|
|
serial ports. The driver is experimental and can currently only be
|
|
built as a module. The module will be called isicom.
|
|
If you want to do that, choose M here.
|
|
|
|
config N_HDLC
|
|
tristate "HDLC line discipline support"
|
|
depends on SERIAL_NONSTANDARD
|
|
help
|
|
Allows synchronous HDLC communications with tty device drivers that
|
|
support synchronous HDLC such as the Microgate SyncLink adapter.
|
|
|
|
This driver can be built as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want).
|
|
The module will be called n_hdlc. If you want to do that, say M
|
|
here.
|
|
|
|
config N_GSM
|
|
tristate "GSM MUX line discipline support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
depends on NET
|
|
help
|
|
This line discipline provides support for the GSM MUX protocol and
|
|
presents the mux as a set of 61 individual tty devices.
|
|
|
|
config TRACE_ROUTER
|
|
tristate "Trace data router for MIPI P1149.7 cJTAG standard"
|
|
depends on TRACE_SINK
|
|
default n
|
|
help
|
|
The trace router uses the Linux tty line discipline framework to
|
|
route trace data coming from a tty port (say UART for example) to
|
|
the trace sink line discipline driver and to another tty port (say
|
|
USB). This is part of a solution for the MIPI P1149.7, compact JTAG,
|
|
standard, which is for debugging mobile devices. The PTI driver in
|
|
drivers/misc/pti.c defines the majority of this MIPI solution.
|
|
|
|
You should select this driver if the target kernel is meant for
|
|
a mobile device containing a modem. Then you will need to select
|
|
"Trace data sink for MIPI P1149.7 cJTAG standard" line discipline
|
|
driver.
|
|
|
|
config TRACE_SINK
|
|
tristate "Trace data sink for MIPI P1149.7 cJTAG standard"
|
|
default n
|
|
help
|
|
The trace sink uses the Linux line discipline framework to receive
|
|
trace data coming from the trace router line discipline driver
|
|
to a user-defined tty port target, like USB.
|
|
This is to provide a way to extract modem trace data on
|
|
devices that do not have a PTI HW module, or just need modem
|
|
trace data to come out of a different HW output port.
|
|
This is part of a solution for the P1149.7, compact JTAG, standard.
|
|
|
|
If you select this option, you need to select
|
|
"Trace data router for MIPI P1149.7 cJTAG standard".
|