c67d0f2926
This isolates the custom S3C24xx GPIO definition table to <linux/platform_data/gpio-samsung-s3x24xx.h> as this is used in a few different places in the kernel, removing the need to depend on the implicit inclusion of <mach/gpio.h> from <linux/gpio.h> and thus getting rid of a few nasty cross-dependencies. We also delete the nifty CONFIG_S3C24XX_GPIO_EXTRA stuff. The biggest this can ever be for the S3C24XX is CONFIG_S3C24XX_GPIO_EXTRA = 128, and then for CPU_S3C2443 or CPU_S3C2416 32*12 GPIOs are added, so 32*12+128 = 512 is the absolute roof value on this platform. So we set the size of ARCH_NR_GPIO to this and the GPIOs array will fit any S3C24XX platform, as per pattern from other archs. ChangeLog v2->v3: - Move the movement of the S3C64XX gpio.h file out of this patch and into the follow-up patch where it belongs. ChangeLog v1->v2: - Added an #ifdef ARCH_S3C24XX around the header inclusion in drivers/gpio/gpio-samsung.c as we would otherwise have colliding definitions when compiling S3C64XX. - Rename inclusion guard in the header file. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
132 lines
2.9 KiB
C
132 lines
2.9 KiB
C
/* linux/arch/arm/mach-s3c2410/usb-simtec.c
|
|
*
|
|
* Copyright 2004-2005 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* http://www.simtec.co.uk/products/EB2410ITX/
|
|
*
|
|
* Simtec BAST and Thorcom VR1000 USB port support functions
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#define DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/platform_data/usb-ohci-s3c2410.h>
|
|
#include <linux/platform_data/gpio-samsung-s3c24xx.h>
|
|
#include <plat/devs.h>
|
|
|
|
#include "bast.h"
|
|
#include "simtec.h"
|
|
|
|
/* control power and monitor over-current events on various Simtec
|
|
* designed boards.
|
|
*/
|
|
|
|
static unsigned int power_state[2];
|
|
|
|
static void
|
|
usb_simtec_powercontrol(int port, int to)
|
|
{
|
|
pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
|
|
|
|
power_state[port] = to;
|
|
|
|
if (power_state[0] && power_state[1])
|
|
gpio_set_value(S3C2410_GPB(4), 0);
|
|
else
|
|
gpio_set_value(S3C2410_GPB(4), 1);
|
|
}
|
|
|
|
static irqreturn_t
|
|
usb_simtec_ocirq(int irq, void *pw)
|
|
{
|
|
struct s3c2410_hcd_info *info = pw;
|
|
|
|
if (gpio_get_value(S3C2410_GPG(10)) == 0) {
|
|
pr_debug("usb_simtec: over-current irq (oc detected)\n");
|
|
s3c2410_usb_report_oc(info, 3);
|
|
} else {
|
|
pr_debug("usb_simtec: over-current irq (oc cleared)\n");
|
|
s3c2410_usb_report_oc(info, 0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
|
|
{
|
|
int ret;
|
|
|
|
if (on) {
|
|
ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
|
|
IRQF_DISABLED | IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING,
|
|
"USB Over-current", info);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "failed to request usb oc irq\n");
|
|
}
|
|
} else {
|
|
free_irq(BAST_IRQ_USBOC, info);
|
|
}
|
|
}
|
|
|
|
static struct s3c2410_hcd_info usb_simtec_info __initdata = {
|
|
.port[0] = {
|
|
.flags = S3C_HCDFLG_USED
|
|
},
|
|
.port[1] = {
|
|
.flags = S3C_HCDFLG_USED
|
|
},
|
|
|
|
.power_control = usb_simtec_powercontrol,
|
|
.enable_oc = usb_simtec_enableoc,
|
|
};
|
|
|
|
|
|
int __init usb_simtec_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
|
|
|
|
ret = gpio_request(S3C2410_GPB(4), "USB power control");
|
|
if (ret < 0) {
|
|
pr_err("%s: failed to get GPB4\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
|
|
if (ret < 0) {
|
|
pr_err("%s: failed to get GPG10\n", __func__);
|
|
gpio_free(S3C2410_GPB(4));
|
|
return ret;
|
|
}
|
|
|
|
/* turn power on */
|
|
gpio_direction_output(S3C2410_GPB(4), 1);
|
|
gpio_direction_input(S3C2410_GPG(10));
|
|
|
|
s3c_ohci_set_platdata(&usb_simtec_info);
|
|
return 0;
|
|
}
|