forked from Minki/linux
5f3b27569f
cleanup spaces before tabs in drivers/watchdog/ Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
462 lines
10 KiB
C
462 lines
10 KiB
C
/*
|
|
* MachZ ZF-Logic Watchdog Timer driver for Linux
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* The author does NOT admit liability nor provide warranty for
|
|
* any of this software. This material is provided "AS-IS" in
|
|
* the hope that it may be useful for others.
|
|
*
|
|
* Author: Fernando Fuganti <fuganti@conectiva.com.br>
|
|
*
|
|
* Based on sbc60xxwdt.c by Jakob Oestergaard
|
|
*
|
|
*
|
|
* We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the
|
|
* following periods:
|
|
* wd#1 - 2 seconds;
|
|
* wd#2 - 7.2 ms;
|
|
* After the expiration of wd#1, it can generate a NMI, SCI, SMI, or
|
|
* a system RESET and it starts wd#2 that unconditionally will RESET
|
|
* the system when the counter reaches zero.
|
|
*
|
|
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
|
|
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
/* ports */
|
|
#define ZF_IOBASE 0x218
|
|
#define INDEX 0x218
|
|
#define DATA_B 0x219
|
|
#define DATA_W 0x21A
|
|
#define DATA_D 0x21A
|
|
|
|
/* indexes */ /* size */
|
|
#define ZFL_VERSION 0x02 /* 16 */
|
|
#define CONTROL 0x10 /* 16 */
|
|
#define STATUS 0x12 /* 8 */
|
|
#define COUNTER_1 0x0C /* 16 */
|
|
#define COUNTER_2 0x0E /* 8 */
|
|
#define PULSE_LEN 0x0F /* 8 */
|
|
|
|
/* controls */
|
|
#define ENABLE_WD1 0x0001
|
|
#define ENABLE_WD2 0x0002
|
|
#define RESET_WD1 0x0010
|
|
#define RESET_WD2 0x0020
|
|
#define GEN_SCI 0x0100
|
|
#define GEN_NMI 0x0200
|
|
#define GEN_SMI 0x0400
|
|
#define GEN_RESET 0x0800
|
|
|
|
|
|
/* utilities */
|
|
|
|
#define WD1 0
|
|
#define WD2 1
|
|
|
|
#define zf_writew(port, data) { outb(port, INDEX); outw(data, DATA_W); }
|
|
#define zf_writeb(port, data) { outb(port, INDEX); outb(data, DATA_B); }
|
|
#define zf_get_ZFL_version() zf_readw(ZFL_VERSION)
|
|
|
|
|
|
static unsigned short zf_readw(unsigned char port)
|
|
{
|
|
outb(port, INDEX);
|
|
return inw(DATA_W);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>");
|
|
MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
#define PFX "machzwd"
|
|
|
|
static const struct watchdog_info zf_info = {
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
.firmware_version = 1,
|
|
.identity = "ZF-Logic watchdog",
|
|
};
|
|
|
|
|
|
/*
|
|
* action refers to action taken when watchdog resets
|
|
* 0 = GEN_RESET
|
|
* 1 = GEN_SMI
|
|
* 2 = GEN_NMI
|
|
* 3 = GEN_SCI
|
|
* defaults to GEN_RESET (0)
|
|
*/
|
|
static int action;
|
|
module_param(action, int, 0);
|
|
MODULE_PARM_DESC(action, "after watchdog resets, generate: "
|
|
"0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI");
|
|
|
|
static void zf_ping(unsigned long data);
|
|
|
|
static int zf_action = GEN_RESET;
|
|
static unsigned long zf_is_open;
|
|
static char zf_expect_close;
|
|
static DEFINE_SPINLOCK(zf_port_lock);
|
|
static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
|
|
static unsigned long next_heartbeat;
|
|
|
|
|
|
/* timeout for user land heart beat (10 seconds) */
|
|
#define ZF_USER_TIMEO (HZ*10)
|
|
|
|
/* timeout for hardware watchdog (~500ms) */
|
|
#define ZF_HW_TIMEO (HZ/2)
|
|
|
|
/* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */
|
|
#define ZF_CTIMEOUT 0xffff
|
|
|
|
#ifndef ZF_DEBUG
|
|
# define dprintk(format, args...)
|
|
#else
|
|
# define dprintk(format, args...) printk(KERN_DEBUG PFX \
|
|
":%s:%d: " format, __func__, __LINE__ , ## args)
|
|
#endif
|
|
|
|
|
|
static inline void zf_set_status(unsigned char new)
|
|
{
|
|
zf_writeb(STATUS, new);
|
|
}
|
|
|
|
|
|
/* CONTROL register functions */
|
|
|
|
static inline unsigned short zf_get_control(void)
|
|
{
|
|
return zf_readw(CONTROL);
|
|
}
|
|
|
|
static inline void zf_set_control(unsigned short new)
|
|
{
|
|
zf_writew(CONTROL, new);
|
|
}
|
|
|
|
|
|
/* WD#? counter functions */
|
|
/*
|
|
* Just set counter value
|
|
*/
|
|
|
|
static inline void zf_set_timer(unsigned short new, unsigned char n)
|
|
{
|
|
switch (n) {
|
|
case WD1:
|
|
zf_writew(COUNTER_1, new);
|
|
case WD2:
|
|
zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* stop hardware timer
|
|
*/
|
|
static void zf_timer_off(void)
|
|
{
|
|
unsigned int ctrl_reg = 0;
|
|
unsigned long flags;
|
|
|
|
/* stop internal ping */
|
|
del_timer_sync(&zf_timer);
|
|
|
|
spin_lock_irqsave(&zf_port_lock, flags);
|
|
/* stop watchdog timer */
|
|
ctrl_reg = zf_get_control();
|
|
ctrl_reg |= (ENABLE_WD1|ENABLE_WD2); /* disable wd1 and wd2 */
|
|
ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2);
|
|
zf_set_control(ctrl_reg);
|
|
spin_unlock_irqrestore(&zf_port_lock, flags);
|
|
|
|
printk(KERN_INFO PFX ": Watchdog timer is now disabled\n");
|
|
}
|
|
|
|
|
|
/*
|
|
* start hardware timer
|
|
*/
|
|
static void zf_timer_on(void)
|
|
{
|
|
unsigned int ctrl_reg = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&zf_port_lock, flags);
|
|
|
|
zf_writeb(PULSE_LEN, 0xff);
|
|
|
|
zf_set_timer(ZF_CTIMEOUT, WD1);
|
|
|
|
/* user land ping */
|
|
next_heartbeat = jiffies + ZF_USER_TIMEO;
|
|
|
|
/* start the timer for internal ping */
|
|
mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
|
|
|
|
/* start watchdog timer */
|
|
ctrl_reg = zf_get_control();
|
|
ctrl_reg |= (ENABLE_WD1|zf_action);
|
|
zf_set_control(ctrl_reg);
|
|
spin_unlock_irqrestore(&zf_port_lock, flags);
|
|
|
|
printk(KERN_INFO PFX ": Watchdog timer is now enabled\n");
|
|
}
|
|
|
|
|
|
static void zf_ping(unsigned long data)
|
|
{
|
|
unsigned int ctrl_reg = 0;
|
|
unsigned long flags;
|
|
|
|
zf_writeb(COUNTER_2, 0xff);
|
|
|
|
if (time_before(jiffies, next_heartbeat)) {
|
|
dprintk("time_before: %ld\n", next_heartbeat - jiffies);
|
|
/*
|
|
* reset event is activated by transition from 0 to 1 on
|
|
* RESET_WD1 bit and we assume that it is already zero...
|
|
*/
|
|
|
|
spin_lock_irqsave(&zf_port_lock, flags);
|
|
ctrl_reg = zf_get_control();
|
|
ctrl_reg |= RESET_WD1;
|
|
zf_set_control(ctrl_reg);
|
|
|
|
/* ...and nothing changes until here */
|
|
ctrl_reg &= ~(RESET_WD1);
|
|
zf_set_control(ctrl_reg);
|
|
spin_unlock_irqrestore(&zf_port_lock, flags);
|
|
|
|
mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
|
|
} else
|
|
printk(KERN_CRIT PFX ": I will reset your machine\n");
|
|
}
|
|
|
|
static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
|
|
loff_t *ppos)
|
|
{
|
|
/* See if we got the magic character */
|
|
if (count) {
|
|
/*
|
|
* no need to check for close confirmation
|
|
* no way to disable watchdog ;)
|
|
*/
|
|
if (!nowayout) {
|
|
size_t ofs;
|
|
/*
|
|
* note: just in case someone wrote the magic character
|
|
* five months ago...
|
|
*/
|
|
zf_expect_close = 0;
|
|
|
|
/* now scan */
|
|
for (ofs = 0; ofs != count; ofs++) {
|
|
char c;
|
|
if (get_user(c, buf + ofs))
|
|
return -EFAULT;
|
|
if (c == 'V') {
|
|
zf_expect_close = 42;
|
|
dprintk("zf_expect_close = 42\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Well, anyhow someone wrote to us,
|
|
* we should return that favour
|
|
*/
|
|
next_heartbeat = jiffies + ZF_USER_TIMEO;
|
|
dprintk("user ping at %ld\n", jiffies);
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &zf_info, sizeof(zf_info)))
|
|
return -EFAULT;
|
|
break;
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
case WDIOC_KEEPALIVE:
|
|
zf_ping(0);
|
|
break;
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int zf_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &zf_is_open))
|
|
return -EBUSY;
|
|
if (nowayout)
|
|
__module_get(THIS_MODULE);
|
|
zf_timer_on();
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int zf_close(struct inode *inode, struct file *file)
|
|
{
|
|
if (zf_expect_close == 42)
|
|
zf_timer_off();
|
|
else {
|
|
del_timer(&zf_timer);
|
|
printk(KERN_ERR PFX ": device file closed unexpectedly. "
|
|
"Will not stop the WDT!\n");
|
|
}
|
|
clear_bit(0, &zf_is_open);
|
|
zf_expect_close = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Notifier for system down
|
|
*/
|
|
|
|
static int zf_notify_sys(struct notifier_block *this, unsigned long code,
|
|
void *unused)
|
|
{
|
|
if (code == SYS_DOWN || code == SYS_HALT)
|
|
zf_timer_off();
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static const struct file_operations zf_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = zf_write,
|
|
.unlocked_ioctl = zf_ioctl,
|
|
.open = zf_open,
|
|
.release = zf_close,
|
|
};
|
|
|
|
static struct miscdevice zf_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &zf_fops,
|
|
};
|
|
|
|
|
|
/*
|
|
* The device needs to learn about soft shutdowns in order to
|
|
* turn the timebomb registers off.
|
|
*/
|
|
static struct notifier_block zf_notifier = {
|
|
.notifier_call = zf_notify_sys,
|
|
};
|
|
|
|
static void __init zf_show_action(int act)
|
|
{
|
|
static const char * const str[] = { "RESET", "SMI", "NMI", "SCI" };
|
|
|
|
printk(KERN_INFO PFX ": Watchdog using action = %s\n", str[act]);
|
|
}
|
|
|
|
static int __init zf_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO PFX
|
|
": MachZ ZF-Logic Watchdog driver initializing.\n");
|
|
|
|
ret = zf_get_ZFL_version();
|
|
if (!ret || ret == 0xffff) {
|
|
printk(KERN_WARNING PFX ": no ZF-Logic found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (action <= 3 && action >= 0)
|
|
zf_action = zf_action >> action;
|
|
else
|
|
action = 0;
|
|
|
|
zf_show_action(action);
|
|
|
|
if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) {
|
|
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
|
|
ZF_IOBASE);
|
|
ret = -EBUSY;
|
|
goto no_region;
|
|
}
|
|
|
|
ret = register_reboot_notifier(&zf_notifier);
|
|
if (ret) {
|
|
printk(KERN_ERR "can't register reboot notifier (err=%d)\n",
|
|
ret);
|
|
goto no_reboot;
|
|
}
|
|
|
|
ret = misc_register(&zf_miscdev);
|
|
if (ret) {
|
|
printk(KERN_ERR "can't misc_register on minor=%d\n",
|
|
WATCHDOG_MINOR);
|
|
goto no_misc;
|
|
}
|
|
|
|
zf_set_status(0);
|
|
zf_set_control(0);
|
|
|
|
return 0;
|
|
|
|
no_misc:
|
|
unregister_reboot_notifier(&zf_notifier);
|
|
no_reboot:
|
|
release_region(ZF_IOBASE, 3);
|
|
no_region:
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void __exit zf_exit(void)
|
|
{
|
|
zf_timer_off();
|
|
|
|
misc_deregister(&zf_miscdev);
|
|
unregister_reboot_notifier(&zf_notifier);
|
|
release_region(ZF_IOBASE, 3);
|
|
}
|
|
|
|
module_init(zf_init);
|
|
module_exit(zf_exit);
|