forked from Minki/linux
b3c8eb5038
Some ethernet adapter vendors are supplying products which support optional (payed license) features. On some adapters this includes a hardware iscsi initiator. The same adapters in a normal (no extra licenses) mode of operation can be used as a software iscsi initiator. In addition, software iscsi boot initiators are becoming a standard part of many vendors uefi implementations. This is creating difficulties during early boot/install determining the proper configuration method for these adapters when they are used as a boot device. The attached patch creates sysfs entries to expose information from the acpi header of the ibft table. This information allows for a method to easily determining if an ibft table was created by a ethernet card's firmware or the system uefi/bios. In the case of a hardware initiator this information in combination with the pci vendor and device id can be used to ascertain any vendor specific behaviors that need to be accommodated. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Bond <dbond@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
34 lines
1.5 KiB
Plaintext
34 lines
1.5 KiB
Plaintext
What: /sys/firmware/ibft/initiator
|
|
Date: November 2007
|
|
Contact: Konrad Rzeszutek <ketuzsezr@darnok.org>
|
|
Description: The /sys/firmware/ibft/initiator directory will contain
|
|
files that expose the iSCSI Boot Firmware Table initiator data.
|
|
Usually this contains the Initiator name.
|
|
|
|
What: /sys/firmware/ibft/targetX
|
|
Date: November 2007
|
|
Contact: Konrad Rzeszutek <ketuzsezr@darnok.org>
|
|
Description: The /sys/firmware/ibft/targetX directory will contain
|
|
files that expose the iSCSI Boot Firmware Table target data.
|
|
Usually this contains the target's IP address, boot LUN,
|
|
target name, and what NIC it is associated with. It can also
|
|
contain the CHAP name (and password), the reverse CHAP
|
|
name (and password)
|
|
|
|
What: /sys/firmware/ibft/ethernetX
|
|
Date: November 2007
|
|
Contact: Konrad Rzeszutek <ketuzsezr@darnok.org>
|
|
Description: The /sys/firmware/ibft/ethernetX directory will contain
|
|
files that expose the iSCSI Boot Firmware Table NIC data.
|
|
Usually this contains the IP address, MAC, and gateway of the NIC.
|
|
|
|
What: /sys/firmware/ibft/acpi_header
|
|
Date: March 2016
|
|
Contact: David Bond <dbond@suse.com>
|
|
Description: The /sys/firmware/ibft/acpi_header directory will contain files
|
|
that expose the SIGNATURE, OEM_ID, and OEM_TABLE_ID fields of the
|
|
acpi table header of the iBFT structure. This will allow for
|
|
identification of the creator of the table which is useful in
|
|
determining quirks associated with some adapters when used in
|
|
hardware vs software iscsi initiator mode.
|