leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
cafe7e544d4979da222eaff12141ecac07901b9c
linux/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
Linus Torvalds ed4643521e Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 
Pull ARM devicetree updates from Arnd Bergmann:
 "After a somewhat quiet 5.17 release, the size of the DT changes is a
  bit larger again. There are nine new SoC that get added, all of them
  related to existing platforms:

   - Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB

   - Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
     tablet

   - Microchip Lan966 networking SoC and it evaluation board

   - Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
     5X and Fairphone FP3 phones

   - Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
     with their evaluation boards

   - Samsung Exynos 850 phone SoC and reference board

   - Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone

   - Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
     from the Samsung Exynos family.

   - TI K3/AM62 SoC and reference board

  Support for additional functionality in existing dts files is added
  all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
  Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
  Broadcom.

  Samsung has a rework for its pinctrl schema that is a bit tricky and
  requires driver changes to be included here.

  A few more platforms only have smaller cleanups and DT Schema fixes,
  this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.

  The new machines are really too many to list, but I'll do it anyway:

  Allwinner:
   - A20-Marsboard development board

  Amlogic:
   - Amediatek X96-AIR (Amlogic S905X3)
   - CYX A95XF3-AIR (Amlogic S905X3)
   - Haochuangy H96-Max (Amlogic S905X3)
   - Amlogic AQ222 (Amlogic S4)
   - OSMC Vero 4K+ (Amlogic S905D)

  Arm Juno:
   - Separate DT depending on SCMI firmware version

  Aspeed:
   - Quanta S6Q BMC (AST2600)
   - ASRock ROMED8HM3 (AST2500)

  Broadcom:
   - Raspberry Pi Zero 2 W

  Marvell MVEBU/Armada:
   - Ctera C200 V1 NAS (kirkwood)
   - Ctera C200 V2 NAS (armada-370)

  Mstar:
   - DongShanPiOne, a low-end embedded board
   - Miyoo Mini handheld game console

  NXP i.MX:
   - Numerous i.MX8M Mini based boards in even more variations, but
    none based on other SoCs this time:
    Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
    Gateworks GW7903

  Qualcomm:
   - Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
   - SHIFT6mq phone (Snapdragon 845)
   - Samsung Galaxy Book2 (Snapdragon 850)
   - Snapdragon 8 Gen 1 Hardware Development Kit

  TI OMAP:
   - SanCloud BeagleBone Enhanced WiFi

  Rockchip:
   - Pine64 PineNote ereader tablet (rk356x)
   - Bananapi-R2-Pro (rk356x)

  STM32:
   - emtrion emSBS-Argon embedded board (stm32mp157c)"

* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
  arm64: dts: n5x: drop invalid property and fix edac node name
  arm64: dts: fsd: Add the MCT support
  arm64: dts: stingray: Fix spi clock name
  arm64: dts: ns2: Fix spi clock name
  ARM: dts: rockchip: Update regulator name for PX3
  ARM: dts: rockchip: Add #clock-cells value for rk805
  arm64: dts: rockchip: Add #clock-cells value for rk805
  arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
  arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
  ARM: dts: at91: sama7g5: Add NAND support
  ARM: dts: at91: sama7g5: add eic node
  ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
  ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
  arm64: dts: lg: align pl330 node name with dtschema
  arm64: dts: lg: add dma-cells to pl330 node
  arm64: dts: juno: align pl330 node name with dtschema
  arm64: dts: broadcom: Fix sata nodename
  arm64: dts: n5x: add sdr edac support
  arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
  dt-bindings: usb: dwc2: add disable-over-current
  ...
2022-03-23 18:37:22 -07:00

659 lines
17 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019, Intel Corporation
*/
/dts-v1/;
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/agilex-clock.h>
/ {
compatible = "intel,socfpga-agilex";
#address-cells = <2>;
#size-cells = <2>;
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
service_reserved: svcbuffer@0 {
compatible = "shared-dma-pool";
reg = <0x0 0x0 0x0 0x2000000>;
alignment = <0x1000>;
no-map;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x0>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>;
interrupt-parent = <&intc>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
intc: interrupt-controller@fffc1000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0xfffc1000 0x0 0x1000>,
<0x0 0xfffc2000 0x0 0x2000>,
<0x0 0xfffc4000 0x0 0x2000>,
<0x0 0xfffc6000 0x0 0x2000>;
};
clocks {
cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
};
cb_intosc_ls_clk: cb-intosc-ls-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
};
f2s_free_clk: f2s-free-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
};
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
qspi_clk: qspi-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&intc>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
usbphy0: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
device_type = "soc";
interrupt-parent = <&intc>;
ranges = <0 0 0 0xffffffff>;
base_fpga_region {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fpga-region";
fpga-mgr = <&fpga_mgr>;
};
clkmgr: clock-controller@ffd10000 {
compatible = "intel,agilex-clkmgr";
reg = <0xffd10000 0x1000>;
#clock-cells = <1>;
};
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff800000 0x2000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 1>;
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
clocks = <&clkmgr AGILEX_EMAC0_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff802000 0x2000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 2>;
altr,sysmgr-syscon = <&sysmgr 0x48 0>;
clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff804000 0x2000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
reset-names = "stmmaceth", "stmmaceth-ocp";
tx-fifo-depth = <16384>;
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 3>;
altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
clock-names = "stmmaceth", "ptp_ref";
status = "disabled";
};
gpio0: gpio@ffc03200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc03200 0x100>;
resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <24>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
};
};
gpio1: gpio@ffc03300 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc03300 0x100>;
resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <24>;
reg = <0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
};
};
i2c0: i2c@ffc02800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02800 0x100>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C0_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
i2c1: i2c@ffc02900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02900 0x100>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C1_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
i2c2: i2c@ffc02a00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02a00 0x100>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C2_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
i2c3: i2c@ffc02b00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02b00 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C3_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
i2c4: i2c@ffc02c00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xffc02c00 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst I2C4_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
mmc: mmc@ff808000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "altr,socfpga-dw-mshc";
reg = <0xff808000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
fifo-depth = <0x400>;
resets = <&rst SDMMC_RESET>;
reset-names = "reset";
clocks = <&clkmgr AGILEX_L4_MP_CLK>,
<&clkmgr AGILEX_SDMMC_CLK>;
clock-names = "biu", "ciu";
iommus = <&smmu 5>;
status = "disabled";
};
nand: nand-controller@ffb90000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "altr,socfpga-denali-nand";
reg = <0xffb90000 0x10000>,
<0xffb80000 0x1000>;
reg-names = "nand_data", "denali_reg";
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkmgr AGILEX_NAND_CLK>,
<&clkmgr AGILEX_NAND_X_CLK>,
<&clkmgr AGILEX_NAND_ECC_CLK>;
clock-names = "nand", "nand_x", "ecc";
resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
status = "disabled";
};
ocram: sram@ffe00000 {
compatible = "mmio-sram";
reg = <0xffe00000 0x40000>;
};
pdma: dma-controller@ffda0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffda0000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
reset-names = "dma", "dma-ocp";
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
clock-names = "apb_pclk";
};
rst: rstmgr@ffd11000 {
#reset-cells = <1>;
compatible = "altr,stratix10-rst-mgr";
reg = <0xffd11000 0x100>;
};
smmu: iommu@fa000000 {
compatible = "arm,mmu-500", "arm,smmu-v2";
reg = <0xfa000000 0x40000>;
#global-interrupts = <2>;
#iommu-cells = <1>;
interrupt-parent = <&intc>;
/* Global Secure Fault */
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
/* Global Non-secure Fault */
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
/* Non-secure Context Interrupts (32) */
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
stream-match-mask = <0x7ff0>;
clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
<&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
<&clkmgr AGILEX_L4_MAIN_CLK>;
status = "disabled";
};
spi0: spi@ffda4000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda4000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst SPIM0_RESET>;
reset-names = "spi";
reg-io-width = <4>;
num-cs = <4>;
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
status = "disabled";
};
spi1: spi@ffda5000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffda5000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst SPIM1_RESET>;
reset-names = "spi";
reg-io-width = <4>;
num-cs = <4>;
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
status = "disabled";
};
sysmgr: sysmgr@ffd12000 {
compatible = "altr,sys-mgr-s10","altr,sys-mgr";
reg = <0xffd12000 0x500>;
};
timer0: timer0@ffc03000 {
compatible = "snps,dw-apb-timer";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc03000 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
};
timer1: timer1@ffc03100 {
compatible = "snps,dw-apb-timer";
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc03100 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00000 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
};
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00100 0x100>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
clock-names = "timer";
};
uart0: serial@ffc02000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02000 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART0_RESET>;
status = "disabled";
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
};
uart1: serial@ffc02100 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02100 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
resets = <&rst UART1_RESET>;
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
status = "disabled";
};
usb0: usb@ffb00000 {
compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
reg = <0xffb00000 0x40000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
reset-names = "dwc2", "dwc2-ecc";
clocks = <&clkmgr AGILEX_USB_CLK>;
clock-names = "otg";
iommus = <&smmu 6>;
status = "disabled";
};
usb1: usb@ffb40000 {
compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
reg = <0xffb40000 0x40000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
reset-names = "dwc2", "dwc2-ecc";
iommus = <&smmu 7>;
clocks = <&clkmgr AGILEX_USB_CLK>;
status = "disabled";
};
watchdog0: watchdog@ffd00200 {
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG0_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
};
watchdog1: watchdog@ffd00300 {
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG1_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
};
watchdog2: watchdog@ffd00400 {
compatible = "snps,dw-wdt";
reg = <0xffd00400 0x100>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG2_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
};
watchdog3: watchdog@ffd00500 {
compatible = "snps,dw-wdt";
reg = <0xffd00500 0x100>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rst WATCHDOG3_RESET>;
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
status = "disabled";
};
sdr: sdr@f8011100 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xf8011100 0xc0>;
};
eccmgr {
compatible = "altr,socfpga-s10-ecc-manager",
"altr,socfpga-a10-ecc-manager";
altr,sysmgr-syscon = <&sysmgr>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
ranges;
sdramedac {
compatible = "altr,sdram-edac-s10";
altr,sdr-syscon = <&sdr>;
interrupts = <16 4>;
};
ocram-ecc@ff8cc000 {
compatible = "altr,socfpga-s10-ocram-ecc",
"altr,socfpga-a10-ocram-ecc";
reg = <0xff8cc000 0x100>;
altr,ecc-parent = <&ocram>;
interrupts = <1 4>;
};
usb0-ecc@ff8c4000 {
compatible = "altr,socfpga-s10-usb-ecc",
"altr,socfpga-usb-ecc";
reg = <0xff8c4000 0x100>;
altr,ecc-parent = <&usb0>;
interrupts = <2 4>;
};
emac0-rx-ecc@ff8c0000 {
compatible = "altr,socfpga-s10-eth-mac-ecc",
"altr,socfpga-eth-mac-ecc";
reg = <0xff8c0000 0x100>;
altr,ecc-parent = <&gmac0>;
interrupts = <4 4>;
};
emac0-tx-ecc@ff8c0400 {
compatible = "altr,socfpga-s10-eth-mac-ecc",
"altr,socfpga-eth-mac-ecc";
reg = <0xff8c0400 0x100>;
altr,ecc-parent = <&gmac0>;
interrupts = <5 4>;
};
sdmmca-ecc@ff8c8c00 {
compatible = "altr,socfpga-s10-sdmmc-ecc",
"altr,socfpga-sdmmc-ecc";
reg = <0xff8c8c00 0x100>;
altr,ecc-parent = <&mmc>;
interrupts = <14 4>,
<15 4>;
};
};
qspi: spi@ff8d2000 {
compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xff8d2000 0x100>,
<0xff900000 0x100000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
clocks = <&qspi_clk>;
status = "disabled";
};
firmware {
svc {
compatible = "intel,agilex-svc";
method = "smc";
memory-region = <&service_reserved>;
fpga_mgr: fpga-mgr {
compatible = "intel,agilex-soc-fpga-mgr";
};
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink