caa355c53b
In linux both are identical, phy-mode is used more often, though. Also for the ls1028a both phy-connection-type and phy-mode was used, one for the enetc nodes and the other for the switch nodes. Unify them. But the main reason for this is that the device tree files can be shared with the u-boot ones; there the enetc driver only supports the "phy-mode" property. Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
60 lines
1.4 KiB
Plaintext
60 lines
1.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Device Tree file for the Kontron SMARC-sAL28 board.
|
|
*
|
|
* This is for the network variant 1 which has one ethernet port. It is
|
|
* different than the base variant, which also has one port, but here the
|
|
* port is connected via RGMII. This port is not TSN aware.
|
|
* None of the four SerDes lanes are used by the module, instead they are
|
|
* all led out to the carrier for customer use.
|
|
*
|
|
* Copyright (C) 2021 Michael Walle <michael@walle.cc>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "fsl-ls1028a-kontron-sl28.dts"
|
|
#include <dt-bindings/net/qca-ar803x.h>
|
|
|
|
/ {
|
|
model = "Kontron SMARC-sAL28 (4 Lanes)";
|
|
compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
|
|
};
|
|
|
|
&enetc_mdio_pf3 {
|
|
/* Delete unused phy node */
|
|
/delete-node/ ethernet-phy@5;
|
|
|
|
phy0: ethernet-phy@4 {
|
|
reg = <0x4>;
|
|
eee-broken-1000t;
|
|
eee-broken-100tx;
|
|
qca,clk-out-frequency = <125000000>;
|
|
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
|
|
qca,keep-pll-enabled;
|
|
vddio-supply = <&vddio>;
|
|
|
|
vddio: vddio-regulator {
|
|
regulator-name = "VDDIO";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vddh: vddh-regulator {
|
|
regulator-name = "VDDH";
|
|
};
|
|
};
|
|
};
|
|
|
|
&enetc_port0 {
|
|
status = "disabled";
|
|
/* Delete the phy-handle to the old phy0 label */
|
|
/delete-property/ phy-handle;
|
|
};
|
|
|
|
&enetc_port1 {
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
};
|