linux/sound/soc/intel/boards/broadwell.c
Rander Wang 906a9abc5d
ASoC: Intel: Haswell/Broadwell: fix setting for .dynamic field
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03 16:32:50 +00:00

288 lines
7.7 KiB
C

/*
* Intel Broadwell Wildcatpoint SST Audio
*
* Copyright (C) 2013, Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include <sound/pcm_params.h>
#include "../common/sst-dsp.h"
#include "../haswell/sst-haswell-ipc.h"
#include "../../codecs/rt286.h"
static struct snd_soc_jack broadwell_headset;
/* Headset jack detection DAPM pins */
static struct snd_soc_jack_pin broadwell_headset_pins[] = {
{
.pin = "Mic Jack",
.mask = SND_JACK_MICROPHONE,
},
{
.pin = "Headphone Jack",
.mask = SND_JACK_HEADPHONE,
},
};
static const struct snd_kcontrol_new broadwell_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
};
static const struct snd_soc_dapm_widget broadwell_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
SND_SOC_DAPM_MIC("Mic Jack", NULL),
SND_SOC_DAPM_MIC("DMIC1", NULL),
SND_SOC_DAPM_MIC("DMIC2", NULL),
SND_SOC_DAPM_LINE("Line Jack", NULL),
};
static const struct snd_soc_dapm_route broadwell_rt286_map[] = {
/* speaker */
{"Speaker", NULL, "SPOR"},
{"Speaker", NULL, "SPOL"},
/* HP jack connectors - unknown if we have jack deteck */
{"Headphone Jack", NULL, "HPO Pin"},
/* other jacks */
{"MIC1", NULL, "Mic Jack"},
{"LINE1", NULL, "Line Jack"},
/* digital mics */
{"DMIC1 Pin", NULL, "DMIC1"},
{"DMIC2 Pin", NULL, "DMIC2"},
/* CODEC BE connections */
{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
};
static int broadwell_rt286_codec_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_component *component = rtd->codec_dai->component;
int ret = 0;
ret = snd_soc_card_jack_new(rtd->card, "Headset",
SND_JACK_HEADSET | SND_JACK_BTN_0, &broadwell_headset,
broadwell_headset_pins, ARRAY_SIZE(broadwell_headset_pins));
if (ret)
return ret;
rt286_mic_detect(component, &broadwell_headset);
return 0;
}
static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_interval *rate = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
/* The ADSP will covert the FE rate to 48k, stereo */
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
/* set SSP0 to 16 bit */
params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
return 0;
}
static int broadwell_rt286_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret;
ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000,
SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(rtd->dev, "can't set codec sysclk configuration\n");
return ret;
}
return ret;
}
static const struct snd_soc_ops broadwell_rt286_ops = {
.hw_params = broadwell_rt286_hw_params,
};
static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct sst_pdata *pdata = dev_get_platdata(component->dev);
struct sst_hsw *broadwell = pdata->dsp;
int ret;
/* Set ADSP SSP port settings */
ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0,
SST_HSW_DEVICE_MCLK_FREQ_24_MHZ,
SST_HSW_DEVICE_CLOCK_MASTER, 9);
if (ret < 0) {
dev_err(rtd->dev, "error: failed to set device config\n");
return ret;
}
return 0;
}
/* broadwell digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link broadwell_rt286_dais[] = {
/* Front End DAI links */
{
.name = "System PCM",
.stream_name = "System Playback/Capture",
.cpu_dai_name = "System Pin",
.platform_name = "haswell-pcm-audio",
.dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.init = broadwell_rtd_init,
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
.dpcm_playback = 1,
.dpcm_capture = 1,
},
{
.name = "Offload0",
.stream_name = "Offload0 Playback",
.cpu_dai_name = "Offload0 Pin",
.platform_name = "haswell-pcm-audio",
.dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
.dpcm_playback = 1,
},
{
.name = "Offload1",
.stream_name = "Offload1 Playback",
.cpu_dai_name = "Offload1 Pin",
.platform_name = "haswell-pcm-audio",
.dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
.dpcm_playback = 1,
},
{
.name = "Loopback PCM",
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
.dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
.dpcm_capture = 1,
},
/* Back End DAI links */
{
/* SSP0 - Codec */
.name = "Codec",
.id = 0,
.cpu_dai_name = "snd-soc-dummy-dai",
.platform_name = "snd-soc-dummy",
.no_pcm = 1,
.codec_name = "i2c-INT343A:00",
.codec_dai_name = "rt286-aif1",
.init = broadwell_rt286_codec_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ignore_suspend = 1,
.ignore_pmdown_time = 1,
.be_hw_params_fixup = broadwell_ssp0_fixup,
.ops = &broadwell_rt286_ops,
.dpcm_playback = 1,
.dpcm_capture = 1,
},
};
static int broadwell_suspend(struct snd_soc_card *card){
struct snd_soc_component *component;
for_each_card_components(card, component) {
if (!strcmp(component->name, "i2c-INT343A:00")) {
dev_dbg(component->dev, "disabling jack detect before going to suspend.\n");
rt286_mic_detect(component, NULL);
break;
}
}
return 0;
}
static int broadwell_resume(struct snd_soc_card *card){
struct snd_soc_component *component;
for_each_card_components(card, component) {
if (!strcmp(component->name, "i2c-INT343A:00")) {
dev_dbg(component->dev, "enabling jack detect for resume.\n");
rt286_mic_detect(component, &broadwell_headset);
break;
}
}
return 0;
}
/* broadwell audio machine driver for WPT + RT286S */
static struct snd_soc_card broadwell_rt286 = {
.name = "broadwell-rt286",
.owner = THIS_MODULE,
.dai_link = broadwell_rt286_dais,
.num_links = ARRAY_SIZE(broadwell_rt286_dais),
.controls = broadwell_controls,
.num_controls = ARRAY_SIZE(broadwell_controls),
.dapm_widgets = broadwell_widgets,
.num_dapm_widgets = ARRAY_SIZE(broadwell_widgets),
.dapm_routes = broadwell_rt286_map,
.num_dapm_routes = ARRAY_SIZE(broadwell_rt286_map),
.fully_routed = true,
.suspend_pre = broadwell_suspend,
.resume_post = broadwell_resume,
};
static int broadwell_audio_probe(struct platform_device *pdev)
{
broadwell_rt286.dev = &pdev->dev;
return devm_snd_soc_register_card(&pdev->dev, &broadwell_rt286);
}
static struct platform_driver broadwell_audio = {
.probe = broadwell_audio_probe,
.driver = {
.name = "broadwell-audio",
},
};
module_platform_driver(broadwell_audio)
/* Module information */
MODULE_AUTHOR("Liam Girdwood, Xingchao Wang");
MODULE_DESCRIPTION("Intel SST Audio for WPT/Broadwell");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:broadwell-audio");