forked from Minki/linux
f20136eb03
Davinci's MDIO controller is present on other TI devices, without an accompanying EMAC. For example, on tnetv107x, the same MDIO module is used in conjunction with a 3-port switch hardware. By separating the MDIO controller code into its own platform driver, this patch allows common logic to be reused on such platforms. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
476 lines
11 KiB
C
476 lines
11 KiB
C
/*
|
|
* DaVinci MDIO Module driver
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments.
|
|
*
|
|
* Shamelessly ripped out of davinci_emac.c, original copyrights follow:
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments.
|
|
*
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/davinci_emac.h>
|
|
|
|
/*
|
|
* This timeout definition is a worst-case ultra defensive measure against
|
|
* unexpected controller lock ups. Ideally, we should never ever hit this
|
|
* scenario in practice.
|
|
*/
|
|
#define MDIO_TIMEOUT 100 /* msecs */
|
|
|
|
#define PHY_REG_MASK 0x1f
|
|
#define PHY_ID_MASK 0x1f
|
|
|
|
#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */
|
|
|
|
struct davinci_mdio_regs {
|
|
u32 version;
|
|
u32 control;
|
|
#define CONTROL_IDLE BIT(31)
|
|
#define CONTROL_ENABLE BIT(30)
|
|
#define CONTROL_MAX_DIV (0xff)
|
|
|
|
u32 alive;
|
|
u32 link;
|
|
u32 linkintraw;
|
|
u32 linkintmasked;
|
|
u32 __reserved_0[2];
|
|
u32 userintraw;
|
|
u32 userintmasked;
|
|
u32 userintmaskset;
|
|
u32 userintmaskclr;
|
|
u32 __reserved_1[20];
|
|
|
|
struct {
|
|
u32 access;
|
|
#define USERACCESS_GO BIT(31)
|
|
#define USERACCESS_WRITE BIT(30)
|
|
#define USERACCESS_ACK BIT(29)
|
|
#define USERACCESS_READ (0)
|
|
#define USERACCESS_DATA (0xffff)
|
|
|
|
u32 physel;
|
|
} user[0];
|
|
};
|
|
|
|
struct mdio_platform_data default_pdata = {
|
|
.bus_freq = DEF_OUT_FREQ,
|
|
};
|
|
|
|
struct davinci_mdio_data {
|
|
struct mdio_platform_data pdata;
|
|
struct davinci_mdio_regs __iomem *regs;
|
|
spinlock_t lock;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
struct mii_bus *bus;
|
|
bool suspended;
|
|
unsigned long access_time; /* jiffies */
|
|
};
|
|
|
|
static void __davinci_mdio_reset(struct davinci_mdio_data *data)
|
|
{
|
|
u32 mdio_in, div, mdio_out_khz, access_time;
|
|
|
|
mdio_in = clk_get_rate(data->clk);
|
|
div = (mdio_in / data->pdata.bus_freq) - 1;
|
|
if (div > CONTROL_MAX_DIV)
|
|
div = CONTROL_MAX_DIV;
|
|
|
|
/* set enable and clock divider */
|
|
__raw_writel(div | CONTROL_ENABLE, &data->regs->control);
|
|
|
|
/*
|
|
* One mdio transaction consists of:
|
|
* 32 bits of preamble
|
|
* 32 bits of transferred data
|
|
* 24 bits of bus yield (not needed unless shared?)
|
|
*/
|
|
mdio_out_khz = mdio_in / (1000 * (div + 1));
|
|
access_time = (88 * 1000) / mdio_out_khz;
|
|
|
|
/*
|
|
* In the worst case, we could be kicking off a user-access immediately
|
|
* after the mdio bus scan state-machine triggered its own read. If
|
|
* so, our request could get deferred by one access cycle. We
|
|
* defensively allow for 4 access cycles.
|
|
*/
|
|
data->access_time = usecs_to_jiffies(access_time * 4);
|
|
if (!data->access_time)
|
|
data->access_time = 1;
|
|
}
|
|
|
|
static int davinci_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
struct davinci_mdio_data *data = bus->priv;
|
|
u32 phy_mask, ver;
|
|
|
|
__davinci_mdio_reset(data);
|
|
|
|
/* wait for scan logic to settle */
|
|
msleep(PHY_MAX_ADDR * data->access_time);
|
|
|
|
/* dump hardware version info */
|
|
ver = __raw_readl(&data->regs->version);
|
|
dev_info(data->dev, "davinci mdio revision %d.%d\n",
|
|
(ver >> 8) & 0xff, ver & 0xff);
|
|
|
|
/* get phy mask from the alive register */
|
|
phy_mask = __raw_readl(&data->regs->alive);
|
|
if (phy_mask) {
|
|
/* restrict mdio bus to live phys only */
|
|
dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
|
|
phy_mask = ~phy_mask;
|
|
} else {
|
|
/* desperately scan all phys */
|
|
dev_warn(data->dev, "no live phy, scanning all\n");
|
|
phy_mask = 0;
|
|
}
|
|
data->bus->phy_mask = phy_mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* wait until hardware is ready for another user access */
|
|
static inline int wait_for_user_access(struct davinci_mdio_data *data)
|
|
{
|
|
struct davinci_mdio_regs __iomem *regs = data->regs;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
|
|
u32 reg;
|
|
|
|
while (time_after(timeout, jiffies)) {
|
|
reg = __raw_readl(®s->user[0].access);
|
|
if ((reg & USERACCESS_GO) == 0)
|
|
return 0;
|
|
|
|
reg = __raw_readl(®s->control);
|
|
if ((reg & CONTROL_IDLE) == 0)
|
|
continue;
|
|
|
|
/*
|
|
* An emac soft_reset may have clobbered the mdio controller's
|
|
* state machine. We need to reset and retry the current
|
|
* operation
|
|
*/
|
|
dev_warn(data->dev, "resetting idled controller\n");
|
|
__davinci_mdio_reset(data);
|
|
return -EAGAIN;
|
|
}
|
|
dev_err(data->dev, "timed out waiting for user access\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* wait until hardware state machine is idle */
|
|
static inline int wait_for_idle(struct davinci_mdio_data *data)
|
|
{
|
|
struct davinci_mdio_regs __iomem *regs = data->regs;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT);
|
|
|
|
while (time_after(timeout, jiffies)) {
|
|
if (__raw_readl(®s->control) & CONTROL_IDLE)
|
|
return 0;
|
|
}
|
|
dev_err(data->dev, "timed out waiting for idle\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
|
|
{
|
|
struct davinci_mdio_data *data = bus->priv;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
|
|
return -EINVAL;
|
|
|
|
spin_lock(&data->lock);
|
|
|
|
if (data->suspended) {
|
|
spin_unlock(&data->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
|
|
(phy_id << 16));
|
|
|
|
while (1) {
|
|
ret = wait_for_user_access(data);
|
|
if (ret == -EAGAIN)
|
|
continue;
|
|
if (ret < 0)
|
|
break;
|
|
|
|
__raw_writel(reg, &data->regs->user[0].access);
|
|
|
|
ret = wait_for_user_access(data);
|
|
if (ret == -EAGAIN)
|
|
continue;
|
|
if (ret < 0)
|
|
break;
|
|
|
|
reg = __raw_readl(&data->regs->user[0].access);
|
|
ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO;
|
|
break;
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
|
|
int phy_reg, u16 phy_data)
|
|
{
|
|
struct davinci_mdio_data *data = bus->priv;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
|
|
return -EINVAL;
|
|
|
|
spin_lock(&data->lock);
|
|
|
|
if (data->suspended) {
|
|
spin_unlock(&data->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
|
|
(phy_id << 16) | (phy_data & USERACCESS_DATA));
|
|
|
|
while (1) {
|
|
ret = wait_for_user_access(data);
|
|
if (ret == -EAGAIN)
|
|
continue;
|
|
if (ret < 0)
|
|
break;
|
|
|
|
__raw_writel(reg, &data->regs->user[0].access);
|
|
|
|
ret = wait_for_user_access(data);
|
|
if (ret == -EAGAIN)
|
|
continue;
|
|
break;
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit davinci_mdio_probe(struct platform_device *pdev)
|
|
{
|
|
struct mdio_platform_data *pdata = pdev->dev.platform_data;
|
|
struct device *dev = &pdev->dev;
|
|
struct davinci_mdio_data *data;
|
|
struct resource *res;
|
|
struct phy_device *phy;
|
|
int ret, addr;
|
|
|
|
data = kzalloc(sizeof(*data), GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(dev, "failed to alloc device data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data->pdata = pdata ? (*pdata) : default_pdata;
|
|
|
|
data->bus = mdiobus_alloc();
|
|
if (!data->bus) {
|
|
dev_err(dev, "failed to alloc mii bus\n");
|
|
ret = -ENOMEM;
|
|
goto bail_out;
|
|
}
|
|
|
|
data->bus->name = dev_name(dev);
|
|
data->bus->read = davinci_mdio_read,
|
|
data->bus->write = davinci_mdio_write,
|
|
data->bus->reset = davinci_mdio_reset,
|
|
data->bus->parent = dev;
|
|
data->bus->priv = data;
|
|
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
|
|
|
|
data->clk = clk_get(dev, NULL);
|
|
if (IS_ERR(data->clk)) {
|
|
data->clk = NULL;
|
|
dev_err(dev, "failed to get device clock\n");
|
|
ret = PTR_ERR(data->clk);
|
|
goto bail_out;
|
|
}
|
|
|
|
clk_enable(data->clk);
|
|
|
|
dev_set_drvdata(dev, data);
|
|
data->dev = dev;
|
|
spin_lock_init(&data->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "could not find register map resource\n");
|
|
ret = -ENOENT;
|
|
goto bail_out;
|
|
}
|
|
|
|
res = devm_request_mem_region(dev, res->start, resource_size(res),
|
|
dev_name(dev));
|
|
if (!res) {
|
|
dev_err(dev, "could not allocate register map resource\n");
|
|
ret = -ENXIO;
|
|
goto bail_out;
|
|
}
|
|
|
|
data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
|
|
if (!data->regs) {
|
|
dev_err(dev, "could not map mdio registers\n");
|
|
ret = -ENOMEM;
|
|
goto bail_out;
|
|
}
|
|
|
|
/* register the mii bus */
|
|
ret = mdiobus_register(data->bus);
|
|
if (ret)
|
|
goto bail_out;
|
|
|
|
/* scan and dump the bus */
|
|
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
|
|
phy = data->bus->phy_map[addr];
|
|
if (phy) {
|
|
dev_info(dev, "phy[%d]: device %s, driver %s\n",
|
|
phy->addr, dev_name(&phy->dev),
|
|
phy->drv ? phy->drv->name : "unknown");
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
bail_out:
|
|
if (data->bus)
|
|
mdiobus_free(data->bus);
|
|
|
|
if (data->clk) {
|
|
clk_disable(data->clk);
|
|
clk_put(data->clk);
|
|
}
|
|
|
|
kfree(data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit davinci_mdio_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct davinci_mdio_data *data = dev_get_drvdata(dev);
|
|
|
|
if (data->bus)
|
|
mdiobus_free(data->bus);
|
|
|
|
if (data->clk) {
|
|
clk_disable(data->clk);
|
|
clk_put(data->clk);
|
|
}
|
|
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_mdio_suspend(struct device *dev)
|
|
{
|
|
struct davinci_mdio_data *data = dev_get_drvdata(dev);
|
|
u32 ctrl;
|
|
|
|
spin_lock(&data->lock);
|
|
|
|
/* shutdown the scan state machine */
|
|
ctrl = __raw_readl(&data->regs->control);
|
|
ctrl &= ~CONTROL_ENABLE;
|
|
__raw_writel(ctrl, &data->regs->control);
|
|
wait_for_idle(data);
|
|
|
|
if (data->clk)
|
|
clk_disable(data->clk);
|
|
|
|
data->suspended = true;
|
|
spin_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_mdio_resume(struct device *dev)
|
|
{
|
|
struct davinci_mdio_data *data = dev_get_drvdata(dev);
|
|
u32 ctrl;
|
|
|
|
spin_lock(&data->lock);
|
|
if (data->clk)
|
|
clk_enable(data->clk);
|
|
|
|
/* restart the scan state machine */
|
|
ctrl = __raw_readl(&data->regs->control);
|
|
ctrl |= CONTROL_ENABLE;
|
|
__raw_writel(ctrl, &data->regs->control);
|
|
|
|
data->suspended = false;
|
|
spin_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops davinci_mdio_pm_ops = {
|
|
.suspend = davinci_mdio_suspend,
|
|
.resume = davinci_mdio_resume,
|
|
};
|
|
|
|
static struct platform_driver davinci_mdio_driver = {
|
|
.driver = {
|
|
.name = "davinci_mdio",
|
|
.owner = THIS_MODULE,
|
|
.pm = &davinci_mdio_pm_ops,
|
|
},
|
|
.probe = davinci_mdio_probe,
|
|
.remove = __devexit_p(davinci_mdio_remove),
|
|
};
|
|
|
|
static int __init davinci_mdio_init(void)
|
|
{
|
|
return platform_driver_register(&davinci_mdio_driver);
|
|
}
|
|
device_initcall(davinci_mdio_init);
|
|
|
|
static void __exit davinci_mdio_exit(void)
|
|
{
|
|
platform_driver_unregister(&davinci_mdio_driver);
|
|
}
|
|
module_exit(davinci_mdio_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("DaVinci MDIO driver");
|