forked from Minki/linux
c5f4644e6c
This patch changes the way serial ports are locked when getting modem status. This change is necessary because we will need to atomically read the modem status and take action depending on the CTS status. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1830 lines
44 KiB
C
1830 lines
44 KiB
C
/*
|
|
* drivers/serial/mpsc.c
|
|
*
|
|
* Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
|
|
* GT64260, MV64340, MV64360, GT96100, ... ).
|
|
*
|
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
|
*
|
|
* Based on an old MPSC driver that was in the linuxppc tree. It appears to
|
|
* have been created by Chris Zankel (formerly of MontaVista) but there
|
|
* is no proper Copyright so I'm not sure. Apparently, parts were also
|
|
* taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
|
|
* by Russell King.
|
|
*
|
|
* 2004 (c) MontaVista, Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
/*
|
|
* The MPSC interface is much like a typical network controller's interface.
|
|
* That is, you set up separate rings of descriptors for transmitting and
|
|
* receiving data. There is also a pool of buffers with (one buffer per
|
|
* descriptor) that incoming data are dma'd into or outgoing data are dma'd
|
|
* out of.
|
|
*
|
|
* The MPSC requires two other controllers to be able to work. The Baud Rate
|
|
* Generator (BRG) provides a clock at programmable frequencies which determines
|
|
* the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the
|
|
* MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
|
|
* MPSC. It is actually the SDMA interrupt that the driver uses to keep the
|
|
* transmit and receive "engines" going (i.e., indicate data has been
|
|
* transmitted or received).
|
|
*
|
|
* NOTES:
|
|
*
|
|
* 1) Some chips have an erratum where several regs cannot be
|
|
* read. To work around that, we keep a local copy of those regs in
|
|
* 'mpsc_port_info'.
|
|
*
|
|
* 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
|
|
* accesses system mem with coherency enabled. For that reason, the driver
|
|
* assumes that coherency for that ctlr has been disabled. This means
|
|
* that when in a cache coherent system, the driver has to manually manage
|
|
* the data cache on the areas that it touches because the dma_* macro are
|
|
* basically no-ops.
|
|
*
|
|
* 3) There is an erratum (on PPC) where you can't use the instruction to do
|
|
* a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
|
|
* where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
|
|
*
|
|
* 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
|
|
*/
|
|
|
|
#include "mpsc.h"
|
|
|
|
/*
|
|
* Define how this driver is known to the outside (we've been assigned a
|
|
* range on the "Low-density serial ports" major).
|
|
*/
|
|
#define MPSC_MAJOR 204
|
|
#define MPSC_MINOR_START 44
|
|
#define MPSC_DRIVER_NAME "MPSC"
|
|
#define MPSC_DEVFS_NAME "ttymm/"
|
|
#define MPSC_DEV_NAME "ttyMM"
|
|
#define MPSC_VERSION "1.00"
|
|
|
|
static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
|
|
static struct mpsc_shared_regs mpsc_shared_regs;
|
|
static struct uart_driver mpsc_reg;
|
|
|
|
static void mpsc_start_rx(struct mpsc_port_info *pi);
|
|
static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
|
|
static void mpsc_release_port(struct uart_port *port);
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Baud Rate Generator Routines (BRG)
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
static void
|
|
mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
|
|
{
|
|
u32 v;
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
|
|
|
|
if (pi->brg_can_tune)
|
|
v &= ~(1 << 25);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->BRG_BCR_m = v;
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
|
|
writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
|
|
pi->brg_base + BRG_BTR);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_brg_enable(struct mpsc_port_info *pi)
|
|
{
|
|
u32 v;
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
v |= (1 << 16);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->BRG_BCR_m = v;
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_brg_disable(struct mpsc_port_info *pi)
|
|
{
|
|
u32 v;
|
|
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
v &= ~(1 << 16);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->BRG_BCR_m = v;
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
|
|
{
|
|
/*
|
|
* To set the baud, we adjust the CDV field in the BRG_BCR reg.
|
|
* From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
|
|
* However, the input clock is divided by 16 in the MPSC b/c of how
|
|
* 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
|
|
* calculation by 16 to account for that. So the real calculation
|
|
* that accounts for the way the mpsc is set up is:
|
|
* CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
|
|
*/
|
|
u32 cdv = (pi->port.uartclk / (baud << 5)) - 1;
|
|
u32 v;
|
|
|
|
mpsc_brg_disable(pi);
|
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
|
v = (v & 0xffff0000) | (cdv & 0xffff);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->BRG_BCR_m = v;
|
|
writel(v, pi->brg_base + BRG_BCR);
|
|
mpsc_brg_enable(pi);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Serial DMA Routines (SDMA)
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
static void
|
|
mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
|
|
pi->port.line, burst_size);
|
|
|
|
burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
|
|
|
|
if (burst_size < 2)
|
|
v = 0x0; /* 1 64-bit word */
|
|
else if (burst_size < 4)
|
|
v = 0x1; /* 2 64-bit words */
|
|
else if (burst_size < 8)
|
|
v = 0x2; /* 4 64-bit words */
|
|
else
|
|
v = 0x3; /* 8 64-bit words */
|
|
|
|
writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
|
|
pi->sdma_base + SDMA_SDC);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
|
|
{
|
|
pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
|
|
burst_size);
|
|
|
|
writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
|
|
pi->sdma_base + SDMA_SDC);
|
|
mpsc_sdma_burstsize(pi, burst_size);
|
|
return;
|
|
}
|
|
|
|
static inline u32
|
|
mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
|
|
{
|
|
u32 old, v;
|
|
|
|
pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
|
|
|
|
old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
mask &= 0xf;
|
|
if (pi->port.line)
|
|
mask <<= 8;
|
|
v &= ~mask;
|
|
|
|
if (pi->mirror_regs)
|
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
if (pi->port.line)
|
|
old >>= 8;
|
|
return old & 0xf;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
|
|
|
|
v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
|
|
mask &= 0xf;
|
|
if (pi->port.line)
|
|
mask <<= 8;
|
|
v |= mask;
|
|
|
|
if (pi->mirror_regs)
|
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
|
|
writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p)
|
|
{
|
|
pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
|
|
pi->port.line, (u32) rxre_p);
|
|
|
|
writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p)
|
|
{
|
|
writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
|
|
writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
|
|
{
|
|
u32 v;
|
|
|
|
v = readl(pi->sdma_base + SDMA_SDCM);
|
|
if (val)
|
|
v |= val;
|
|
else
|
|
v = 0;
|
|
wmb();
|
|
writel(v, pi->sdma_base + SDMA_SDCM);
|
|
wmb();
|
|
return;
|
|
}
|
|
|
|
static inline uint
|
|
mpsc_sdma_tx_active(struct mpsc_port_info *pi)
|
|
{
|
|
return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_start_tx(struct mpsc_port_info *pi)
|
|
{
|
|
struct mpsc_tx_desc *txre, *txre_p;
|
|
|
|
/* If tx isn't running & there's a desc ready to go, start it */
|
|
if (!mpsc_sdma_tx_active(pi)) {
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)txre,
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
#endif
|
|
|
|
if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
|
|
txre_p = (struct mpsc_tx_desc *)(pi->txr_p +
|
|
(pi->txr_tail *
|
|
MPSC_TXRE_SIZE));
|
|
|
|
mpsc_sdma_set_tx_ring(pi, txre_p);
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_sdma_stop(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
|
|
|
|
/* Abort any SDMA transfers */
|
|
mpsc_sdma_cmd(pi, 0);
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
|
|
|
|
/* Clear the SDMA current and first TX and RX pointers */
|
|
mpsc_sdma_set_tx_ring(pi, NULL);
|
|
mpsc_sdma_set_rx_ring(pi, NULL);
|
|
|
|
/* Disable interrupts */
|
|
mpsc_sdma_intr_mask(pi, 0xf);
|
|
mpsc_sdma_intr_ack(pi);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Multi-Protocol Serial Controller Routines (MPSC)
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
static void
|
|
mpsc_hw_init(struct mpsc_port_info *pi)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
|
|
|
|
/* Set up clock routing */
|
|
if (pi->mirror_regs) {
|
|
v = pi->shared_regs->MPSC_MRR_m;
|
|
v &= ~0x1c7;
|
|
pi->shared_regs->MPSC_MRR_m = v;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
|
|
v = pi->shared_regs->MPSC_RCRR_m;
|
|
v = (v & ~0xf0f) | 0x100;
|
|
pi->shared_regs->MPSC_RCRR_m = v;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
|
|
v = pi->shared_regs->MPSC_TCRR_m;
|
|
v = (v & ~0xf0f) | 0x100;
|
|
pi->shared_regs->MPSC_TCRR_m = v;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
}
|
|
else {
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
v &= ~0x1c7;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
|
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
v = (v & ~0xf0f) | 0x100;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
|
|
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
v = (v & ~0xf0f) | 0x100;
|
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
|
}
|
|
|
|
/* Put MPSC in UART mode & enabel Tx/Rx egines */
|
|
writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
|
|
|
|
/* No preamble, 16x divider, low-latency, */
|
|
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
|
|
|
|
if (pi->mirror_regs) {
|
|
pi->MPSC_CHR_1_m = 0;
|
|
pi->MPSC_CHR_2_m = 0;
|
|
}
|
|
writel(0, pi->mpsc_base + MPSC_CHR_1);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_2);
|
|
writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_4);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_5);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_6);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_7);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_8);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_9);
|
|
writel(0, pi->mpsc_base + MPSC_CHR_10);
|
|
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_enter_hunt(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
|
|
|
|
if (pi->mirror_regs) {
|
|
writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
|
|
pi->mpsc_base + MPSC_CHR_2);
|
|
/* Erratum prevents reading CHR_2 so just delay for a while */
|
|
udelay(100);
|
|
}
|
|
else {
|
|
writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
|
|
pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
|
|
udelay(10);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_freeze(struct mpsc_port_info *pi)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
v |= MPSC_MPCR_FRZ;
|
|
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_MPCR_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_unfreeze(struct mpsc_port_info *pi)
|
|
{
|
|
u32 v;
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
v &= ~MPSC_MPCR_FRZ;
|
|
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_MPCR_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
|
|
pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_MPCR_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
|
|
pi->port.line, len);
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
|
readl(pi->mpsc_base + MPSC_MPCR);
|
|
|
|
v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_MPCR_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
|
|
{
|
|
u32 v;
|
|
|
|
pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
|
|
|
|
v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
|
|
readl(pi->mpsc_base + MPSC_CHR_2);
|
|
|
|
p &= 0x3;
|
|
v = (v & ~0xc000c) | (p << 18) | (p << 2);
|
|
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_CHR_2_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_CHR_2);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Driver Init Routines
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
static void
|
|
mpsc_init_hw(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
|
|
|
|
mpsc_brg_init(pi, pi->brg_clk_src);
|
|
mpsc_brg_enable(pi);
|
|
mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */
|
|
mpsc_sdma_stop(pi);
|
|
mpsc_hw_init(pi);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
|
|
{
|
|
int rc = 0;
|
|
|
|
pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
|
|
pi->port.line);
|
|
|
|
if (!pi->dma_region) {
|
|
if (!dma_supported(pi->port.dev, 0xffffffff)) {
|
|
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
|
|
rc = -ENXIO;
|
|
}
|
|
else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
|
|
MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL))
|
|
== NULL) {
|
|
|
|
printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
|
|
rc = -ENOMEM;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
mpsc_free_ring_mem(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
|
|
|
|
if (pi->dma_region) {
|
|
dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
|
|
pi->dma_region, pi->dma_region_p);
|
|
pi->dma_region = NULL;
|
|
pi->dma_region_p = (dma_addr_t) NULL;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_init_rings(struct mpsc_port_info *pi)
|
|
{
|
|
struct mpsc_rx_desc *rxre;
|
|
struct mpsc_tx_desc *txre;
|
|
dma_addr_t dp, dp_p;
|
|
u8 *bp, *bp_p;
|
|
int i;
|
|
|
|
pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
|
|
|
|
BUG_ON(pi->dma_region == NULL);
|
|
|
|
memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
|
|
|
|
/*
|
|
* Descriptors & buffers are multiples of cacheline size and must be
|
|
* cacheline aligned.
|
|
*/
|
|
dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment());
|
|
dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment());
|
|
|
|
/*
|
|
* Partition dma region into rx ring descriptor, rx buffers,
|
|
* tx ring descriptors, and tx buffers.
|
|
*/
|
|
pi->rxr = dp;
|
|
pi->rxr_p = dp_p;
|
|
dp += MPSC_RXR_SIZE;
|
|
dp_p += MPSC_RXR_SIZE;
|
|
|
|
pi->rxb = (u8 *) dp;
|
|
pi->rxb_p = (u8 *) dp_p;
|
|
dp += MPSC_RXB_SIZE;
|
|
dp_p += MPSC_RXB_SIZE;
|
|
|
|
pi->rxr_posn = 0;
|
|
|
|
pi->txr = dp;
|
|
pi->txr_p = dp_p;
|
|
dp += MPSC_TXR_SIZE;
|
|
dp_p += MPSC_TXR_SIZE;
|
|
|
|
pi->txb = (u8 *) dp;
|
|
pi->txb_p = (u8 *) dp_p;
|
|
|
|
pi->txr_head = 0;
|
|
pi->txr_tail = 0;
|
|
|
|
/* Init rx ring descriptors */
|
|
dp = pi->rxr;
|
|
dp_p = pi->rxr_p;
|
|
bp = pi->rxb;
|
|
bp_p = pi->rxb_p;
|
|
|
|
for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
|
|
rxre = (struct mpsc_rx_desc *)dp;
|
|
|
|
rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
|
|
rxre->bytecnt = cpu_to_be16(0);
|
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
|
SDMA_DESC_CMDSTAT_EI |
|
|
SDMA_DESC_CMDSTAT_F |
|
|
SDMA_DESC_CMDSTAT_L);
|
|
rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
|
|
rxre->buf_ptr = cpu_to_be32(bp_p);
|
|
|
|
dp += MPSC_RXRE_SIZE;
|
|
dp_p += MPSC_RXRE_SIZE;
|
|
bp += MPSC_RXBE_SIZE;
|
|
bp_p += MPSC_RXBE_SIZE;
|
|
}
|
|
rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */
|
|
|
|
/* Init tx ring descriptors */
|
|
dp = pi->txr;
|
|
dp_p = pi->txr_p;
|
|
bp = pi->txb;
|
|
bp_p = pi->txb_p;
|
|
|
|
for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
|
|
txre = (struct mpsc_tx_desc *)dp;
|
|
|
|
txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
|
|
txre->buf_ptr = cpu_to_be32(bp_p);
|
|
|
|
dp += MPSC_TXRE_SIZE;
|
|
dp_p += MPSC_TXRE_SIZE;
|
|
bp += MPSC_TXBE_SIZE;
|
|
bp_p += MPSC_TXBE_SIZE;
|
|
}
|
|
txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */
|
|
|
|
dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE,
|
|
DMA_BIDIRECTIONAL);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
flush_dcache_range((ulong)pi->dma_region,
|
|
(ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_uninit_rings(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
|
|
|
|
BUG_ON(pi->dma_region == NULL);
|
|
|
|
pi->rxr = 0;
|
|
pi->rxr_p = 0;
|
|
pi->rxb = NULL;
|
|
pi->rxb_p = NULL;
|
|
pi->rxr_posn = 0;
|
|
|
|
pi->txr = 0;
|
|
pi->txr_p = 0;
|
|
pi->txb = NULL;
|
|
pi->txb_p = NULL;
|
|
pi->txr_head = 0;
|
|
pi->txr_tail = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_make_ready(struct mpsc_port_info *pi)
|
|
{
|
|
int rc;
|
|
|
|
pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
|
|
|
|
if (!pi->ready) {
|
|
mpsc_init_hw(pi);
|
|
if ((rc = mpsc_alloc_ring_mem(pi)))
|
|
return rc;
|
|
mpsc_init_rings(pi);
|
|
pi->ready = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Interrupt Handling Routines
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
static inline int
|
|
mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs)
|
|
{
|
|
struct mpsc_rx_desc *rxre;
|
|
struct tty_struct *tty = pi->port.info->tty;
|
|
u32 cmdstat, bytes_in, i;
|
|
int rc = 0;
|
|
u8 *bp;
|
|
char flag = TTY_NORMAL;
|
|
|
|
pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
|
|
|
|
rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
|
|
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)rxre,
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
#endif
|
|
|
|
/*
|
|
* Loop through Rx descriptors handling ones that have been completed.
|
|
*/
|
|
while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){
|
|
bytes_in = be16_to_cpu(rxre->bytecnt);
|
|
|
|
/* Following use of tty struct directly is deprecated */
|
|
if (unlikely((tty->flip.count + bytes_in) >= TTY_FLIPBUF_SIZE)){
|
|
if (tty->low_latency)
|
|
tty_flip_buffer_push(tty);
|
|
/*
|
|
* If this failed then we will throw awa the bytes
|
|
* but mst do so to clear interrupts.
|
|
*/
|
|
}
|
|
|
|
bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
|
|
dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)bp,
|
|
(ulong)bp + MPSC_RXBE_SIZE);
|
|
#endif
|
|
|
|
/*
|
|
* Other than for parity error, the manual provides little
|
|
* info on what data will be in a frame flagged by any of
|
|
* these errors. For parity error, it is the last byte in
|
|
* the buffer that had the error. As for the rest, I guess
|
|
* we'll assume there is no data in the buffer.
|
|
* If there is...it gets lost.
|
|
*/
|
|
if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) {
|
|
|
|
pi->port.icount.rx++;
|
|
|
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */
|
|
pi->port.icount.brk++;
|
|
|
|
if (uart_handle_break(&pi->port))
|
|
goto next_frame;
|
|
}
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */
|
|
pi->port.icount.frame++;
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */
|
|
pi->port.icount.overrun++;
|
|
|
|
cmdstat &= pi->port.read_status_mask;
|
|
|
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR)
|
|
flag = TTY_BREAK;
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
|
|
flag = TTY_FRAME;
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
|
|
flag = TTY_OVERRUN;
|
|
else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
|
|
flag = TTY_PARITY;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&pi->port, *bp, regs)) {
|
|
bp++;
|
|
bytes_in--;
|
|
goto next_frame;
|
|
}
|
|
|
|
if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
|
|
!(cmdstat & pi->port.ignore_status_mask))
|
|
|
|
tty_insert_flip_char(tty, *bp, flag);
|
|
else {
|
|
for (i=0; i<bytes_in; i++)
|
|
tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
|
|
|
|
pi->port.icount.rx += bytes_in;
|
|
}
|
|
|
|
next_frame:
|
|
rxre->bytecnt = cpu_to_be16(0);
|
|
wmb();
|
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
|
SDMA_DESC_CMDSTAT_EI |
|
|
SDMA_DESC_CMDSTAT_F |
|
|
SDMA_DESC_CMDSTAT_L);
|
|
wmb();
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
flush_dcache_range((ulong)rxre,
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
#endif
|
|
|
|
/* Advance to next descriptor */
|
|
pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
|
|
rxre = (struct mpsc_rx_desc *)(pi->rxr +
|
|
(pi->rxr_posn * MPSC_RXRE_SIZE));
|
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)rxre,
|
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
|
#endif
|
|
|
|
rc = 1;
|
|
}
|
|
|
|
/* Restart rx engine, if its stopped */
|
|
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
|
|
mpsc_start_rx(pi);
|
|
|
|
tty_flip_buffer_push(tty);
|
|
return rc;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
|
|
{
|
|
struct mpsc_tx_desc *txre;
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
(pi->txr_head * MPSC_TXRE_SIZE));
|
|
|
|
txre->bytecnt = cpu_to_be16(count);
|
|
txre->shadow = txre->bytecnt;
|
|
wmb(); /* ensure cmdstat is last field updated */
|
|
txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F |
|
|
SDMA_DESC_CMDSTAT_L | ((intr) ?
|
|
SDMA_DESC_CMDSTAT_EI
|
|
: 0));
|
|
wmb();
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
flush_dcache_range((ulong)txre,
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
#endif
|
|
|
|
return;
|
|
}
|
|
|
|
static inline void
|
|
mpsc_copy_tx_data(struct mpsc_port_info *pi)
|
|
{
|
|
struct circ_buf *xmit = &pi->port.info->xmit;
|
|
u8 *bp;
|
|
u32 i;
|
|
|
|
/* Make sure the desc ring isn't full */
|
|
while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) <
|
|
(MPSC_TXR_ENTRIES - 1)) {
|
|
if (pi->port.x_char) {
|
|
/*
|
|
* Ideally, we should use the TCS field in
|
|
* CHR_1 to put the x_char out immediately but
|
|
* errata prevents us from being able to read
|
|
* CHR_2 to know that its safe to write to
|
|
* CHR_1. Instead, just put it in-band with
|
|
* all the other Tx data.
|
|
*/
|
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
*bp = pi->port.x_char;
|
|
pi->port.x_char = 0;
|
|
i = 1;
|
|
}
|
|
else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){
|
|
i = min((u32) MPSC_TXBE_SIZE,
|
|
(u32) uart_circ_chars_pending(xmit));
|
|
i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail,
|
|
UART_XMIT_SIZE));
|
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
memcpy(bp, &xmit->buf[xmit->tail], i);
|
|
xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&pi->port);
|
|
}
|
|
else /* All tx data copied into ring bufs */
|
|
return;
|
|
|
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
flush_dcache_range((ulong)bp,
|
|
(ulong)bp + MPSC_TXBE_SIZE);
|
|
#endif
|
|
mpsc_setup_tx_desc(pi, i, 1);
|
|
|
|
/* Advance to next descriptor */
|
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static inline int
|
|
mpsc_tx_intr(struct mpsc_port_info *pi)
|
|
{
|
|
struct mpsc_tx_desc *txre;
|
|
int rc = 0;
|
|
|
|
if (!mpsc_sdma_tx_active(pi)) {
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)txre,
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
#endif
|
|
|
|
while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
|
|
rc = 1;
|
|
pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
|
|
pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
|
|
|
|
/* If no more data to tx, fall out of loop */
|
|
if (pi->txr_head == pi->txr_tail)
|
|
break;
|
|
|
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
invalidate_dcache_range((ulong)txre,
|
|
(ulong)txre + MPSC_TXRE_SIZE);
|
|
#endif
|
|
}
|
|
|
|
mpsc_copy_tx_data(pi);
|
|
mpsc_sdma_start_tx(pi); /* start next desc if ready */
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* This is the driver's interrupt handler. To avoid a race, we first clear
|
|
* the interrupt, then handle any completed Rx/Tx descriptors. When done
|
|
* handling those descriptors, we restart the Rx/Tx engines if they're stopped.
|
|
*/
|
|
static irqreturn_t
|
|
mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct mpsc_port_info *pi = dev_id;
|
|
ulong iflags;
|
|
int rc = IRQ_NONE;
|
|
|
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
|
|
|
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
|
mpsc_sdma_intr_ack(pi);
|
|
if (mpsc_rx_intr(pi, regs))
|
|
rc = IRQ_HANDLED;
|
|
if (mpsc_tx_intr(pi))
|
|
rc = IRQ_HANDLED;
|
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
|
|
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* serial_core.c Interface routines
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
static uint
|
|
mpsc_tx_empty(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
ulong iflags;
|
|
uint rc;
|
|
|
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
|
rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
|
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
mpsc_set_mctrl(struct uart_port *port, uint mctrl)
|
|
{
|
|
/* Have no way to set modem control lines AFAICT */
|
|
return;
|
|
}
|
|
|
|
static uint
|
|
mpsc_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
u32 mflags, status;
|
|
|
|
status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
|
|
readl(pi->mpsc_base + MPSC_CHR_10);
|
|
|
|
mflags = 0;
|
|
if (status & 0x1)
|
|
mflags |= TIOCM_CTS;
|
|
if (status & 0x2)
|
|
mflags |= TIOCM_CAR;
|
|
|
|
return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */
|
|
}
|
|
|
|
static void
|
|
mpsc_stop_tx(struct uart_port *port, uint tty_start)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
pr_debug("mpsc_stop_tx[%d]: tty_start: %d\n", port->line, tty_start);
|
|
|
|
mpsc_freeze(pi);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_start_tx(struct uart_port *port, uint tty_start)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
mpsc_unfreeze(pi);
|
|
mpsc_copy_tx_data(pi);
|
|
mpsc_sdma_start_tx(pi);
|
|
|
|
pr_debug("mpsc_start_tx[%d]: tty_start: %d\n", port->line, tty_start);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_start_rx(struct mpsc_port_info *pi)
|
|
{
|
|
pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
|
|
|
|
if (pi->rcv_data) {
|
|
mpsc_enter_hunt(pi);
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_stop_rx(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
|
|
|
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_enable_ms(struct uart_port *port)
|
|
{
|
|
return; /* Not supported */
|
|
}
|
|
|
|
static void
|
|
mpsc_break_ctl(struct uart_port *port, int ctl)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
ulong flags;
|
|
u32 v;
|
|
|
|
v = ctl ? 0x00ff0000 : 0;
|
|
|
|
spin_lock_irqsave(&pi->port.lock, flags);
|
|
if (pi->mirror_regs)
|
|
pi->MPSC_CHR_1_m = v;
|
|
writel(v, pi->mpsc_base + MPSC_CHR_1);
|
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_startup(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
u32 flag = 0;
|
|
int rc;
|
|
|
|
pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
|
|
port->line, pi->port.irq);
|
|
|
|
if ((rc = mpsc_make_ready(pi)) == 0) {
|
|
/* Setup IRQ handler */
|
|
mpsc_sdma_intr_ack(pi);
|
|
|
|
/* If irq's are shared, need to set flag */
|
|
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
|
|
flag = SA_SHIRQ;
|
|
|
|
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
|
|
"mpsc/sdma", pi))
|
|
printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
|
|
pi->port.irq);
|
|
|
|
mpsc_sdma_intr_unmask(pi, 0xf);
|
|
mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p +
|
|
(pi->rxr_posn * MPSC_RXRE_SIZE)));
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
mpsc_shutdown(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
|
|
|
|
mpsc_sdma_stop(pi);
|
|
free_irq(pi->port.irq, pi);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_set_termios(struct uart_port *port, struct termios *termios,
|
|
struct termios *old)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
u32 baud;
|
|
ulong flags;
|
|
u32 chr_bits, stop_bits, par;
|
|
|
|
pi->c_iflag = termios->c_iflag;
|
|
pi->c_cflag = termios->c_cflag;
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
chr_bits = MPSC_MPCR_CL_5;
|
|
break;
|
|
case CS6:
|
|
chr_bits = MPSC_MPCR_CL_6;
|
|
break;
|
|
case CS7:
|
|
chr_bits = MPSC_MPCR_CL_7;
|
|
break;
|
|
case CS8:
|
|
default:
|
|
chr_bits = MPSC_MPCR_CL_8;
|
|
break;
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
stop_bits = MPSC_MPCR_SBL_2;
|
|
else
|
|
stop_bits = MPSC_MPCR_SBL_1;
|
|
|
|
par = MPSC_CHR_2_PAR_EVEN;
|
|
if (termios->c_cflag & PARENB)
|
|
if (termios->c_cflag & PARODD)
|
|
par = MPSC_CHR_2_PAR_ODD;
|
|
#ifdef CMSPAR
|
|
if (termios->c_cflag & CMSPAR) {
|
|
if (termios->c_cflag & PARODD)
|
|
par = MPSC_CHR_2_PAR_MARK;
|
|
else
|
|
par = MPSC_CHR_2_PAR_SPACE;
|
|
}
|
|
#endif
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
|
|
|
|
spin_lock_irqsave(&pi->port.lock, flags);
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
mpsc_set_char_length(pi, chr_bits);
|
|
mpsc_set_stop_bit_length(pi, stop_bits);
|
|
mpsc_set_parity(pi, par);
|
|
mpsc_set_baudrate(pi, baud);
|
|
|
|
/* Characters/events to read */
|
|
pi->rcv_data = 1;
|
|
pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
|
|
|
|
if (termios->c_iflag & INPCK)
|
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
|
SDMA_DESC_CMDSTAT_FR;
|
|
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
|
|
|
/* Characters/events to ignore */
|
|
pi->port.ignore_status_mask = 0;
|
|
|
|
if (termios->c_iflag & IGNPAR)
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
|
SDMA_DESC_CMDSTAT_FR;
|
|
|
|
if (termios->c_iflag & IGNBRK) {
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
|
|
|
if (termios->c_iflag & IGNPAR)
|
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
|
|
}
|
|
|
|
/* Ignore all chars if CREAD not set */
|
|
if (!(termios->c_cflag & CREAD))
|
|
pi->rcv_data = 0;
|
|
else
|
|
mpsc_start_rx(pi);
|
|
|
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
|
return;
|
|
}
|
|
|
|
static const char *
|
|
mpsc_type(struct uart_port *port)
|
|
{
|
|
pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
|
|
return MPSC_DRIVER_NAME;
|
|
}
|
|
|
|
static int
|
|
mpsc_request_port(struct uart_port *port)
|
|
{
|
|
/* Should make chip/platform specific call */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mpsc_release_port(struct uart_port *port)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
|
|
if (pi->ready) {
|
|
mpsc_uninit_rings(pi);
|
|
mpsc_free_ring_mem(pi);
|
|
pi->ready = 0;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_config_port(struct uart_port *port, int flags)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
|
int rc = 0;
|
|
|
|
pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
|
|
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
|
|
rc = -EINVAL;
|
|
else if (pi->port.irq != ser->irq)
|
|
rc = -EINVAL;
|
|
else if (ser->io_type != SERIAL_IO_MEM)
|
|
rc = -EINVAL;
|
|
else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
|
|
rc = -EINVAL;
|
|
else if ((void *)pi->port.mapbase != ser->iomem_base)
|
|
rc = -EINVAL;
|
|
else if (pi->port.iobase != ser->port)
|
|
rc = -EINVAL;
|
|
else if (ser->hub6 != 0)
|
|
rc = -EINVAL;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct uart_ops mpsc_pops = {
|
|
.tx_empty = mpsc_tx_empty,
|
|
.set_mctrl = mpsc_set_mctrl,
|
|
.get_mctrl = mpsc_get_mctrl,
|
|
.stop_tx = mpsc_stop_tx,
|
|
.start_tx = mpsc_start_tx,
|
|
.stop_rx = mpsc_stop_rx,
|
|
.enable_ms = mpsc_enable_ms,
|
|
.break_ctl = mpsc_break_ctl,
|
|
.startup = mpsc_startup,
|
|
.shutdown = mpsc_shutdown,
|
|
.set_termios = mpsc_set_termios,
|
|
.type = mpsc_type,
|
|
.release_port = mpsc_release_port,
|
|
.request_port = mpsc_request_port,
|
|
.config_port = mpsc_config_port,
|
|
.verify_port = mpsc_verify_port,
|
|
};
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Console Interface Routines
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
#ifdef CONFIG_SERIAL_MPSC_CONSOLE
|
|
static void
|
|
mpsc_console_write(struct console *co, const char *s, uint count)
|
|
{
|
|
struct mpsc_port_info *pi = &mpsc_ports[co->index];
|
|
u8 *bp, *dp, add_cr = 0;
|
|
int i;
|
|
|
|
while (mpsc_sdma_tx_active(pi))
|
|
udelay(100);
|
|
|
|
while (count > 0) {
|
|
bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
|
|
|
for (i = 0; i < MPSC_TXBE_SIZE; i++) {
|
|
if (count == 0)
|
|
break;
|
|
|
|
if (add_cr) {
|
|
*(dp++) = '\r';
|
|
add_cr = 0;
|
|
}
|
|
else {
|
|
*(dp++) = *s;
|
|
|
|
if (*(s++) == '\n') { /* add '\r' after '\n' */
|
|
add_cr = 1;
|
|
count++;
|
|
}
|
|
}
|
|
|
|
count--;
|
|
}
|
|
|
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
|
flush_dcache_range((ulong)bp,
|
|
(ulong)bp + MPSC_TXBE_SIZE);
|
|
#endif
|
|
mpsc_setup_tx_desc(pi, i, 0);
|
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
mpsc_sdma_start_tx(pi);
|
|
|
|
while (mpsc_sdma_tx_active(pi))
|
|
udelay(100);
|
|
|
|
pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int __init
|
|
mpsc_console_setup(struct console *co, char *options)
|
|
{
|
|
struct mpsc_port_info *pi;
|
|
int baud, bits, parity, flow;
|
|
|
|
pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
|
|
|
|
if (co->index >= MPSC_NUM_CTLRS)
|
|
co->index = 0;
|
|
|
|
pi = &mpsc_ports[co->index];
|
|
|
|
baud = pi->default_baud;
|
|
bits = pi->default_bits;
|
|
parity = pi->default_parity;
|
|
flow = pi->default_flow;
|
|
|
|
if (!pi->port.ops)
|
|
return -ENODEV;
|
|
|
|
spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&pi->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console mpsc_console = {
|
|
.name = MPSC_DEV_NAME,
|
|
.write = mpsc_console_write,
|
|
.device = uart_console_device,
|
|
.setup = mpsc_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &mpsc_reg,
|
|
};
|
|
|
|
static int __init
|
|
mpsc_late_console_init(void)
|
|
{
|
|
pr_debug("mpsc_late_console_init: Enter\n");
|
|
|
|
if (!(mpsc_console.flags & CON_ENABLED))
|
|
register_console(&mpsc_console);
|
|
return 0;
|
|
}
|
|
|
|
late_initcall(mpsc_late_console_init);
|
|
|
|
#define MPSC_CONSOLE &mpsc_console
|
|
#else
|
|
#define MPSC_CONSOLE NULL
|
|
#endif
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Dummy Platform Driver to extract & map shared register regions
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
static void
|
|
mpsc_resource_err(char *s)
|
|
{
|
|
printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_shared_map_regs(struct platform_device *pd)
|
|
{
|
|
struct resource *r;
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start,
|
|
MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) {
|
|
|
|
mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
mpsc_shared_regs.mpsc_routing_base_p = r->start;
|
|
}
|
|
else {
|
|
mpsc_resource_err("MPSC routing base");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start,
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) {
|
|
|
|
mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
|
mpsc_shared_regs.sdma_intr_base_p = r->start;
|
|
}
|
|
else {
|
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
mpsc_resource_err("SDMA intr base");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mpsc_shared_unmap_regs(void)
|
|
{
|
|
if (!mpsc_shared_regs.mpsc_routing_base) {
|
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
|
}
|
|
if (!mpsc_shared_regs.sdma_intr_base) {
|
|
iounmap(mpsc_shared_regs.sdma_intr_base);
|
|
release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
|
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
|
}
|
|
|
|
mpsc_shared_regs.mpsc_routing_base = NULL;
|
|
mpsc_shared_regs.sdma_intr_base = NULL;
|
|
|
|
mpsc_shared_regs.mpsc_routing_base_p = 0;
|
|
mpsc_shared_regs.sdma_intr_base_p = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_shared_drv_probe(struct device *dev)
|
|
{
|
|
struct platform_device *pd = to_platform_device(dev);
|
|
struct mpsc_shared_pdata *pdata;
|
|
int rc = -ENODEV;
|
|
|
|
if (pd->id == 0) {
|
|
if (!(rc = mpsc_shared_map_regs(pd))) {
|
|
pdata = (struct mpsc_shared_pdata *)dev->platform_data;
|
|
|
|
mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
|
|
mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
|
|
mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
|
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m =
|
|
pdata->intr_cause_val;
|
|
mpsc_shared_regs.SDMA_INTR_MASK_m =
|
|
pdata->intr_mask_val;
|
|
|
|
rc = 0;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
mpsc_shared_drv_remove(struct device *dev)
|
|
{
|
|
struct platform_device *pd = to_platform_device(dev);
|
|
int rc = -ENODEV;
|
|
|
|
if (pd->id == 0) {
|
|
mpsc_shared_unmap_regs();
|
|
mpsc_shared_regs.MPSC_MRR_m = 0;
|
|
mpsc_shared_regs.MPSC_RCRR_m = 0;
|
|
mpsc_shared_regs.MPSC_TCRR_m = 0;
|
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
|
|
mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct device_driver mpsc_shared_driver = {
|
|
.name = MPSC_SHARED_NAME,
|
|
.bus = &platform_bus_type,
|
|
.probe = mpsc_shared_drv_probe,
|
|
.remove = mpsc_shared_drv_remove,
|
|
};
|
|
|
|
/*
|
|
******************************************************************************
|
|
*
|
|
* Driver Interface Routines
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
static struct uart_driver mpsc_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = MPSC_DRIVER_NAME,
|
|
.devfs_name = MPSC_DEVFS_NAME,
|
|
.dev_name = MPSC_DEV_NAME,
|
|
.major = MPSC_MAJOR,
|
|
.minor = MPSC_MINOR_START,
|
|
.nr = MPSC_NUM_CTLRS,
|
|
.cons = MPSC_CONSOLE,
|
|
};
|
|
|
|
static int
|
|
mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd)
|
|
{
|
|
struct resource *r;
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) &&
|
|
request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){
|
|
|
|
pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
|
|
pi->mpsc_base_p = r->start;
|
|
}
|
|
else {
|
|
mpsc_resource_err("MPSC base");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
|
MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start,
|
|
MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
|
|
|
|
pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
|
|
pi->sdma_base_p = r->start;
|
|
}
|
|
else {
|
|
mpsc_resource_err("SDMA base");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
|
|
&& request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE,
|
|
"brg_regs")) {
|
|
|
|
pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
|
|
pi->brg_base_p = r->start;
|
|
}
|
|
else {
|
|
mpsc_resource_err("BRG base");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
|
|
{
|
|
if (!pi->mpsc_base) {
|
|
iounmap(pi->mpsc_base);
|
|
release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
|
|
}
|
|
if (!pi->sdma_base) {
|
|
iounmap(pi->sdma_base);
|
|
release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
|
|
}
|
|
if (!pi->brg_base) {
|
|
iounmap(pi->brg_base);
|
|
release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
|
|
}
|
|
|
|
pi->mpsc_base = NULL;
|
|
pi->sdma_base = NULL;
|
|
pi->brg_base = NULL;
|
|
|
|
pi->mpsc_base_p = 0;
|
|
pi->sdma_base_p = 0;
|
|
pi->brg_base_p = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
|
|
struct platform_device *pd, int num)
|
|
{
|
|
struct mpsc_pdata *pdata;
|
|
|
|
pdata = (struct mpsc_pdata *)pd->dev.platform_data;
|
|
|
|
pi->port.uartclk = pdata->brg_clk_freq;
|
|
pi->port.iotype = UPIO_MEM;
|
|
pi->port.line = num;
|
|
pi->port.type = PORT_MPSC;
|
|
pi->port.fifosize = MPSC_TXBE_SIZE;
|
|
pi->port.membase = pi->mpsc_base;
|
|
pi->port.mapbase = (ulong)pi->mpsc_base;
|
|
pi->port.ops = &mpsc_pops;
|
|
|
|
pi->mirror_regs = pdata->mirror_regs;
|
|
pi->cache_mgmt = pdata->cache_mgmt;
|
|
pi->brg_can_tune = pdata->brg_can_tune;
|
|
pi->brg_clk_src = pdata->brg_clk_src;
|
|
pi->mpsc_max_idle = pdata->max_idle;
|
|
pi->default_baud = pdata->default_baud;
|
|
pi->default_bits = pdata->default_bits;
|
|
pi->default_parity = pdata->default_parity;
|
|
pi->default_flow = pdata->default_flow;
|
|
|
|
/* Initial values of mirrored regs */
|
|
pi->MPSC_CHR_1_m = pdata->chr_1_val;
|
|
pi->MPSC_CHR_2_m = pdata->chr_2_val;
|
|
pi->MPSC_CHR_10_m = pdata->chr_10_val;
|
|
pi->MPSC_MPCR_m = pdata->mpcr_val;
|
|
pi->BRG_BCR_m = pdata->bcr_val;
|
|
|
|
pi->shared_regs = &mpsc_shared_regs;
|
|
|
|
pi->port.irq = platform_get_irq(pd, 0);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mpsc_drv_probe(struct device *dev)
|
|
{
|
|
struct platform_device *pd = to_platform_device(dev);
|
|
struct mpsc_port_info *pi;
|
|
int rc = -ENODEV;
|
|
|
|
pr_debug("mpsc_drv_probe: Adding MPSC %d\n", pd->id);
|
|
|
|
if (pd->id < MPSC_NUM_CTLRS) {
|
|
pi = &mpsc_ports[pd->id];
|
|
|
|
if (!(rc = mpsc_drv_map_regs(pi, pd))) {
|
|
mpsc_drv_get_platform_data(pi, pd, pd->id);
|
|
|
|
if (!(rc = mpsc_make_ready(pi)))
|
|
if (!(rc = uart_add_one_port(&mpsc_reg,
|
|
&pi->port)))
|
|
rc = 0;
|
|
else {
|
|
mpsc_release_port(
|
|
(struct uart_port *)pi);
|
|
mpsc_drv_unmap_regs(pi);
|
|
}
|
|
else
|
|
mpsc_drv_unmap_regs(pi);
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
mpsc_drv_remove(struct device *dev)
|
|
{
|
|
struct platform_device *pd = to_platform_device(dev);
|
|
|
|
pr_debug("mpsc_drv_exit: Removing MPSC %d\n", pd->id);
|
|
|
|
if (pd->id < MPSC_NUM_CTLRS) {
|
|
uart_remove_one_port(&mpsc_reg, &mpsc_ports[pd->id].port);
|
|
mpsc_release_port((struct uart_port *)&mpsc_ports[pd->id].port);
|
|
mpsc_drv_unmap_regs(&mpsc_ports[pd->id]);
|
|
return 0;
|
|
}
|
|
else
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct device_driver mpsc_driver = {
|
|
.name = MPSC_CTLR_NAME,
|
|
.bus = &platform_bus_type,
|
|
.probe = mpsc_drv_probe,
|
|
.remove = mpsc_drv_remove,
|
|
};
|
|
|
|
static int __init
|
|
mpsc_drv_init(void)
|
|
{
|
|
int rc;
|
|
|
|
printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
|
|
|
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
|
|
|
if (!(rc = uart_register_driver(&mpsc_reg))) {
|
|
if (!(rc = driver_register(&mpsc_shared_driver))) {
|
|
if ((rc = driver_register(&mpsc_driver))) {
|
|
driver_unregister(&mpsc_shared_driver);
|
|
uart_unregister_driver(&mpsc_reg);
|
|
}
|
|
}
|
|
else
|
|
uart_unregister_driver(&mpsc_reg);
|
|
}
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
static void __exit
|
|
mpsc_drv_exit(void)
|
|
{
|
|
driver_unregister(&mpsc_driver);
|
|
driver_unregister(&mpsc_shared_driver);
|
|
uart_unregister_driver(&mpsc_reg);
|
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
|
return;
|
|
}
|
|
|
|
module_init(mpsc_drv_init);
|
|
module_exit(mpsc_drv_exit);
|
|
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
|
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
|
|
MODULE_VERSION(MPSC_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
|