linux/drivers/tty/serial
Douglas Anderson c362272bde tty: serial: qcom_geni_serial: Fix serial when not used as console
If you've got the "console" serial port setup to use just as a UART
(AKA there is no "console=ttyMSMX" on the kernel command line) then
certain initialization is skipped.  When userspace later tries to do
something with the port then things go boom (specifically, on my
system, some sort of exception hit that caused the system to reboot
itself w/ no error messages).

Let's cleanup / refactor the init so that we always run the same init
code regardless of whether we're using the console.

To make this work, we make rely on qcom_geni_serial_pm doing its job
to turn resources on.

For the record, here is a trace of the order of things (after this
patch) when console= is specified on the command line and we have an
agetty on the port:
  qcom_geni_serial_pm: 4 (undefined) => 0 (on)
  qcom_geni_console_setup
  qcom_geni_serial_port_setup
  qcom_geni_serial_console_write
  qcom_geni_serial_startup
  qcom_geni_serial_start_tx

...and here is the order of things (after this patch) when console= is
_NOT_ specified on the command line and we have an agetty port:
  qcom_geni_serial_pm: 4 => 0
  qcom_geni_serial_pm: 0 => 3
  qcom_geni_serial_pm: 3 => 0
  qcom_geni_serial_startup
  qcom_geni_serial_port_setup
  qcom_geni_serial_pm: 0 => 3
  qcom_geni_serial_pm: 3 => 0
  qcom_geni_serial_startup
  qcom_geni_serial_start_tx

Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18 16:07:24 +02:00
..
8250 serial: 8250_omap: Make 8250_omap driver driver depend on ARCH_K3 2018-09-18 16:07:24 +02:00
cpm_uart TTY/Serial patches for 4.15-rc1 2017-11-13 21:05:31 -08:00
jsm tty: serial: jsm: remove redundant pointer ch 2018-07-13 15:36:32 +02:00
21285.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
altera_jtaguart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
altera_uart.c serial: altera: set RRDY flag also without irq 2018-02-28 13:30:09 +01:00
amba-pl010.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
amba-pl011.c tty: pl011: Avoid spuriously stuck-off interrupts 2018-05-14 13:41:05 +02:00
amba-pl011.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
apbuart.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
apbuart.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ar933x_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
arc_uart.c serial: arc_uart: Fix out-of-bounds access through DT alias 2018-02-28 15:29:59 +01:00
atmel_serial.c tty/serial: atmel: Change the driver to work under at91-usart MFD 2018-09-10 16:12:43 +01:00
atmel_serial.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
bcm63xx_uart.c MIPS changes for 4.15 2017-11-15 11:36:08 -08:00
clps711x.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
digicolor-usart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
dz.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
dz.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
earlycon-arm-semihost.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
earlycon.c earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon 2018-05-14 13:41:05 +02:00
efm32-uart.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
fsl_lpuart.c serial: fsl_lpuart: Fix out-of-bounds access through DT alias 2018-02-28 15:29:59 +01:00
icom.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
icom.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ifx6x60.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
ifx6x60.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
imx.c tty: serial: imx: add pinctrl sleep/default mode switch for suspend 2018-09-18 16:07:24 +02:00
ioc3_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ioc4_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ip22zilog.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
ip22zilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Kconfig tty/serial: atmel: Change the driver to work under at91-usart MFD 2018-09-10 16:12:43 +01:00
kgdb_nmi.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
kgdboc.c kgdboc: Fix restrict error 2018-09-18 16:07:23 +02:00
lantiq.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
lpc32xx_hs.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
Makefile TTY/Serial driver patches for 4.17-rc1 2018-04-04 18:43:49 -07:00
max310x.c serial: max310x: Check the clock readiness 2018-06-28 21:07:54 +09:00
max3100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mcf.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
men_z135_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
meson_uart.c tty: serial: meson: fix typo in the "stop bit" register definition 2017-11-28 15:32:33 +01:00
mpc52xx_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
mps2-uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
mpsc.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
msm_serial.c tty: serial: msm_serial: Add __maybe_unused to suspend/resume callbacks 2018-05-14 13:41:05 +02:00
mux.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mvebu-uart.c Merge 4.17-rc3 into tty-next 2018-04-30 05:14:55 -07:00
mxs-auart.c serial: mxs-auart: Fix potential infinite loop 2018-09-18 16:07:24 +02:00
netx-serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
omap-serial.c tty: omap-serial: Fix initial on-boot RTS GPIO level 2018-01-09 16:45:17 +01:00
owl-uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pch_uart.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
pic32_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pic32_uart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pmac_zilog.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pmac_zilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pnx8xxx_uart.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
pxa.c serial: pxa: Fix an error handling path in 'serial_pxa_probe()' 2018-06-28 21:07:54 +09:00
qcom_geni_serial.c tty: serial: qcom_geni_serial: Fix serial when not used as console 2018-09-18 16:07:24 +02:00
rp2.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
sa1100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
samsung.c serial: samsung: Enable baud clock for UART reset procedure in resume 2018-09-18 16:07:24 +02:00
samsung.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sb1250-duart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sc16is7xx.c sc16is7xx: Check for an error when the clock is enabled. 2018-04-25 14:56:12 +02:00
sccnxp.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
serial_core.c uart: fix race between uart_put_char() and uart_shutdown() 2018-07-13 11:26:43 +02:00
serial_ks8695.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial_mctrl_gpio.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial_mctrl_gpio.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial_txx9.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial-tegra.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sh-sci.c serial: sh-sci: Add earlycon for R7S9210 2018-09-18 16:07:24 +02:00
sh-sci.h serial: sh-sci: Support for HSCIF RX sampling point adjustment 2018-04-23 10:08:18 +02:00
sirfsoc_uart.c serial: sirf: Fix out-of-bounds access through DT alias 2018-02-28 15:30:00 +01:00
sirfsoc_uart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sn_console.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
sprd_serial.c serial: sprd: Fix the indentation issue 2018-09-18 16:07:24 +02:00
st-asc.c tty: serial: simplify getting .drvdata 2018-04-22 17:29:43 +02:00
stm32-usart.c serial: stm32: fix initialization of RS485 mode 2018-03-15 17:39:43 +01:00
stm32-usart.h serial: stm32: add support for RS485 hardware control mode 2018-03-14 13:35:37 +01:00
suncore.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunhv.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunsab.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sunsab.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sunsu.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunzilog.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunzilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
timbuart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
timbuart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
uartlite.c tty: serial: uartlite: Use dynamic array for console port 2018-09-18 16:07:24 +02:00
ucc_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
vr41xx_siu.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
vt8500_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
xilinx_uartps.c serial: uartps: Enable automatic flow control 2018-09-18 16:07:23 +02:00
zs.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
zs.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00