c337104b1a
Now that the SST/Skylake driver supports per platform selectors, we can add logic to automatically select the right driver. If the Skylake driver is selected for a specific platform, and the DSP is detected at run-time based on the PCI class/subclass/prog-if information, the legacy HDaudio driver aborts the probe. This will result in a single driver probing and remove the need for modprobe blacklists. Follow-up patches will add a module parameter to bypass the logic if this automatic detection fails, or if the Skylake driver is unable to actually support the platform (firmware authentication, missing topology file, hardware issue, etc). The same mechanism will be used to conflicts generated by the same PCI ID being registered by both legacy HDAuudio and SOF drivers for Intel platforms. In other words SOF will not require changes to the HDaudio legacy. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
294 lines
9.1 KiB
Plaintext
294 lines
9.1 KiB
Plaintext
menu "HD-Audio"
|
|
|
|
config SND_HDA
|
|
tristate
|
|
select SND_PCM
|
|
select SND_VMASTER
|
|
select SND_JACK
|
|
select SND_HDA_CORE
|
|
|
|
config SND_HDA_INTEL
|
|
tristate "HD Audio PCI"
|
|
depends on SND_PCI
|
|
select SND_HDA
|
|
help
|
|
Say Y here to include support for Intel "High Definition
|
|
Audio" (Azalia) and its compatible devices.
|
|
|
|
This option enables the HD-audio controller. Don't forget
|
|
to choose the appropriate codec options below.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hda-intel.
|
|
|
|
config SND_HDA_TEGRA
|
|
tristate "NVIDIA Tegra HD Audio"
|
|
depends on ARCH_TEGRA
|
|
select SND_HDA
|
|
help
|
|
Say Y here to support the HDA controller present in NVIDIA
|
|
Tegra SoCs
|
|
|
|
This options enables support for the HD Audio controller
|
|
present in some NVIDIA Tegra SoCs, used to communicate audio
|
|
to the HDMI output.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hda-tegra.
|
|
|
|
if SND_HDA
|
|
|
|
config SND_HDA_HWDEP
|
|
bool "Build hwdep interface for HD-audio driver"
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to build a hwdep interface for HD-audio driver.
|
|
This interface can be used for out-of-band communication
|
|
with codecs for debugging purposes.
|
|
|
|
config SND_HDA_RECONFIG
|
|
bool "Allow dynamic codec reconfiguration"
|
|
help
|
|
Say Y here to enable the HD-audio codec re-configuration feature.
|
|
It allows user to clear the whole codec configuration, change the
|
|
codec setup, add extra verbs, and re-configure the codec dynamically.
|
|
|
|
Note that this item alone doesn't provide the sysfs interface, but
|
|
enables the feature just for the patch loader below.
|
|
If you need the traditional sysfs entries for the manual interaction,
|
|
turn on CONFIG_SND_HDA_HWDEP as well.
|
|
|
|
config SND_HDA_INPUT_BEEP
|
|
bool "Support digital beep via input layer"
|
|
depends on INPUT=y || INPUT=SND_HDA
|
|
help
|
|
Say Y here to build a digital beep interface for HD-audio
|
|
driver. This interface is used to generate digital beeps.
|
|
|
|
config SND_HDA_INPUT_BEEP_MODE
|
|
int "Digital beep registration mode (0=off, 1=on)"
|
|
depends on SND_HDA_INPUT_BEEP=y
|
|
default "1"
|
|
range 0 1
|
|
help
|
|
Set 0 to disable the digital beep interface for HD-audio by default.
|
|
Set 1 to always enable the digital beep interface for HD-audio by
|
|
default.
|
|
|
|
config SND_HDA_PATCH_LOADER
|
|
bool "Support initialization patch loading for HD-audio"
|
|
select FW_LOADER
|
|
select SND_HDA_RECONFIG
|
|
help
|
|
Say Y here to allow the HD-audio driver to load a pseudo
|
|
firmware file ("patch") for overriding the BIOS setup at
|
|
start up. The "patch" file can be specified via patch module
|
|
option, such as patch=hda-init.
|
|
|
|
config SND_HDA_CODEC_REALTEK
|
|
tristate "Build Realtek HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include Realtek HD-audio codec support in
|
|
snd-hda-intel driver, such as ALC880.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
|
|
|
|
config SND_HDA_CODEC_ANALOG
|
|
tristate "Build Analog Device HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include Analog Device HD-audio codec support in
|
|
snd-hda-intel driver, such as AD1986A.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
|
|
|
|
config SND_HDA_CODEC_SIGMATEL
|
|
tristate "Build IDT/Sigmatel HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
|
|
snd-hda-intel driver, such as STAC9200.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
|
|
|
|
config SND_HDA_CODEC_VIA
|
|
tristate "Build VIA HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include VIA HD-audio codec support in
|
|
snd-hda-intel driver, such as VT1708.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
|
|
|
|
config SND_HDA_CODEC_HDMI
|
|
tristate "Build HDMI/DisplayPort HD-audio codec support"
|
|
select SND_DYNAMIC_MINORS
|
|
help
|
|
Say Y or M here to include HDMI and DisplayPort HD-audio codec
|
|
support in snd-hda-intel driver. This includes all AMD/ATI,
|
|
Intel and Nvidia HDMI/DisplayPort codecs.
|
|
|
|
Note that this option mandatorily enables CONFIG_SND_DYNAMIC_MINORS
|
|
to assure the multiple streams for DP-MST support.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
|
|
|
|
config SND_HDA_CODEC_CIRRUS
|
|
tristate "Build Cirrus Logic codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include Cirrus Logic codec support in
|
|
snd-hda-intel driver, such as CS4206.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
|
|
|
|
config SND_HDA_CODEC_CONEXANT
|
|
tristate "Build Conexant HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include Conexant HD-audio codec support in
|
|
snd-hda-intel driver, such as CX20549.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
|
|
|
|
config SND_HDA_CODEC_CA0110
|
|
tristate "Build Creative CA0110-IBG codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include Creative CA0110-IBG codec support in
|
|
snd-hda-intel driver, found on some Creative X-Fi cards.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
|
|
|
|
config SND_HDA_CODEC_CA0132
|
|
tristate "Build Creative CA0132 codec support"
|
|
help
|
|
Say Y or M here to include Creative CA0132 codec support in
|
|
snd-hda-intel driver.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
|
|
|
|
config SND_HDA_CODEC_CA0132_DSP
|
|
bool "Support new DSP code for CA0132 codec"
|
|
depends on SND_HDA_CODEC_CA0132
|
|
select SND_HDA_DSP_LOADER
|
|
select FW_LOADER
|
|
help
|
|
Say Y here to enable the DSP for Creative CA0132 for extended
|
|
features like equalizer or echo cancellation.
|
|
|
|
Note that this option requires the external firmware file
|
|
(ctefx.bin).
|
|
|
|
config SND_HDA_CODEC_CMEDIA
|
|
tristate "Build C-Media HD-audio codec support"
|
|
select SND_HDA_GENERIC
|
|
help
|
|
Say Y or M here to include C-Media HD-audio codec support in
|
|
snd-hda-intel driver, such as CMI9880.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
|
|
|
|
config SND_HDA_CODEC_SI3054
|
|
tristate "Build Silicon Labs 3054 HD-modem codec support"
|
|
help
|
|
Say Y or M here to include Silicon Labs 3054 HD-modem codec
|
|
(and compatibles) support in snd-hda-intel driver.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
|
|
|
|
config SND_HDA_GENERIC
|
|
tristate "Enable generic HD-audio codec parser"
|
|
help
|
|
Say Y or M here to enable the generic HD-audio codec parser
|
|
in snd-hda-intel driver.
|
|
|
|
comment "Set to Y if you want auto-loading the codec driver"
|
|
depends on SND_HDA=y && SND_HDA_GENERIC=m
|
|
|
|
config SND_HDA_POWER_SAVE_DEFAULT
|
|
int "Default time-out for HD-audio power-save mode"
|
|
depends on PM
|
|
default 0
|
|
help
|
|
The default time-out value in seconds for HD-audio automatic
|
|
power-save mode. 0 means to disable the power-save mode.
|
|
|
|
if SND_HDA_INTEL
|
|
|
|
# The options below should not be enabled by distributions or
|
|
# users. They are selected by Intel/Skylake or SOF drivers when they
|
|
# register for a PCI ID which is also handled by the HDAudio legacy
|
|
# driver. When this option is selected and the DSP is detected based on
|
|
# the PCI class/subclass/prog-if, the probe of the HDAudio legacy
|
|
# aborts. This mechanism removes the need for distributions to use
|
|
# blacklists. It can be bypassed with module parameters should the
|
|
# Intel/Skylake or SOF drivers fail to handle a specific platform.
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_SKL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
Skylake machines.
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_APL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
Broxton/ApolloLake machines
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_KBL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
KabyLake machines
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_GLK
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
GeminiLake machines
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_CNL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
CannonLake machines
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_CFL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
CoffeeLake machines
|
|
|
|
config SND_HDA_INTEL_DSP_DETECTION_ICL
|
|
bool
|
|
help
|
|
This option is selected by SOF or SST drivers, not users or distros.
|
|
It enables DSP detection based on PCI class information for
|
|
IceLake machines
|
|
|
|
endif ## SND_HDA_INTEL
|
|
|
|
endif
|
|
|
|
endmenu
|