forked from Minki/linux
780e312175
The errors were found by checkpatch.pl. Most fixes are:
- remove spaces followed by TAB(s),
- split lines greater than 80 characters,
- move most '{'s from start of line to end of previous line.
(Some '{'s at start of line remain when the '}'s are on the same line)
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
273 lines
7.4 KiB
C
273 lines
7.4 KiB
C
/*
|
|
* Driver for the po1030 sensor.
|
|
*
|
|
* Copyright (c) 2008 Erik Andrén
|
|
* Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
|
|
* Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
|
|
*
|
|
* Portions of code to USB interface and ALi driver software,
|
|
* Copyright (c) 2006 Willem Duinker
|
|
* v4l2 interface modeled after the V4L2 driver
|
|
* for SN9C10x PC Camera Controllers
|
|
*
|
|
* Register defines taken from Pascal Stangs Procyon Armlib
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2.
|
|
*
|
|
*/
|
|
|
|
#ifndef M5602_PO1030_H_
|
|
#define M5602_PO1030_H_
|
|
|
|
#include "m5602_sensor.h"
|
|
|
|
/*****************************************************************************/
|
|
|
|
#define PO1030_DEVID_H 0x00
|
|
#define PO1030_DEVID_L 0x01
|
|
#define PO1030_FRAMEWIDTH_H 0x04
|
|
#define PO1030_FRAMEWIDTH_L 0x05
|
|
#define PO1030_FRAMEHEIGHT_H 0x06
|
|
#define PO1030_FRAMEHEIGHT_L 0x07
|
|
#define PO1030_WINDOWX_H 0x08
|
|
#define PO1030_WINDOWX_L 0x09
|
|
#define PO1030_WINDOWY_H 0x0a
|
|
#define PO1030_WINDOWY_L 0x0b
|
|
#define PO1030_WINDOWWIDTH_H 0x0c
|
|
#define PO1030_WINDOWWIDTH_L 0x0d
|
|
#define PO1030_WINDOWHEIGHT_H 0x0e
|
|
#define PO1030_WINDOWHEIGHT_L 0x0f
|
|
|
|
#define PO1030_GLOBALIBIAS 0x12
|
|
#define PO1030_PIXELIBIAS 0x13
|
|
|
|
#define PO1030_GLOBALGAIN 0x15
|
|
#define PO1030_RED_GAIN 0x16
|
|
#define PO1030_GREEN_1_GAIN 0x17
|
|
#define PO1030_BLUE_GAIN 0x18
|
|
#define PO1030_GREEN_2_GAIN 0x19
|
|
|
|
#define PO1030_INTEGLINES_H 0x1a
|
|
#define PO1030_INTEGLINES_M 0x1b
|
|
#define PO1030_INTEGLINES_L 0x1c
|
|
|
|
#define PO1030_CONTROL1 0x1d
|
|
#define PO1030_CONTROL2 0x1e
|
|
#define PO1030_CONTROL3 0x1f
|
|
#define PO1030_CONTROL4 0x20
|
|
|
|
#define PO1030_PERIOD50_H 0x23
|
|
#define PO1030_PERIOD50_L 0x24
|
|
#define PO1030_PERIOD60_H 0x25
|
|
#define PO1030_PERIOD60_L 0x26
|
|
#define PO1030_REGCLK167 0x27
|
|
#define PO1030_FLICKER_DELTA50 0x28
|
|
#define PO1030_FLICKERDELTA60 0x29
|
|
|
|
#define PO1030_ADCOFFSET 0x2c
|
|
|
|
/* Gamma Correction Coeffs */
|
|
#define PO1030_GC0 0x2d
|
|
#define PO1030_GC1 0x2e
|
|
#define PO1030_GC2 0x2f
|
|
#define PO1030_GC3 0x30
|
|
#define PO1030_GC4 0x31
|
|
#define PO1030_GC5 0x32
|
|
#define PO1030_GC6 0x33
|
|
#define PO1030_GC7 0x34
|
|
|
|
/* Color Transform Matrix */
|
|
#define PO1030_CT0 0x35
|
|
#define PO1030_CT1 0x36
|
|
#define PO1030_CT2 0x37
|
|
#define PO1030_CT3 0x38
|
|
#define PO1030_CT4 0x39
|
|
#define PO1030_CT5 0x3a
|
|
#define PO1030_CT6 0x3b
|
|
#define PO1030_CT7 0x3c
|
|
#define PO1030_CT8 0x3d
|
|
|
|
#define PO1030_AUTOCTRL1 0x3e
|
|
#define PO1030_AUTOCTRL2 0x3f
|
|
|
|
#define PO1030_YTARGET 0x40
|
|
#define PO1030_GLOBALGAINMIN 0x41
|
|
#define PO1030_GLOBALGAINMAX 0x42
|
|
|
|
#define PO1030_AWB_RED_TUNING 0x47
|
|
#define PO1030_AWB_BLUE_TUNING 0x48
|
|
|
|
/* Output format control */
|
|
#define PO1030_OUTFORMCTRL1 0x5a
|
|
#define PO1030_OUTFORMCTRL2 0x5b
|
|
#define PO1030_OUTFORMCTRL3 0x5c
|
|
#define PO1030_OUTFORMCTRL4 0x5d
|
|
#define PO1030_OUTFORMCTRL5 0x5e
|
|
|
|
#define PO1030_EDGE_ENH_OFF 0x5f
|
|
#define PO1030_EGA 0x60
|
|
|
|
#define PO1030_Cb_U_GAIN 0x63
|
|
#define PO1030_Cr_V_GAIN 0x64
|
|
|
|
#define PO1030_YCONTRAST 0x74
|
|
#define PO1030_YSATURATION 0x75
|
|
|
|
#define PO1030_HFLIP (1 << 7)
|
|
#define PO1030_VFLIP (1 << 6)
|
|
|
|
#define PO1030_HREF_ENABLE (1 << 6)
|
|
|
|
#define PO1030_RAW_RGB_BAYER 0x4
|
|
|
|
#define PO1030_FRAME_EQUAL (1 << 3)
|
|
#define PO1030_AUTO_SUBSAMPLING (1 << 4)
|
|
|
|
#define PO1030_WEIGHT_WIN_2X (1 << 3)
|
|
|
|
#define PO1030_SHUTTER_MODE (1 << 6)
|
|
#define PO1030_AUTO_SUBSAMPLING (1 << 4)
|
|
#define PO1030_FRAME_EQUAL (1 << 3)
|
|
|
|
#define PO1030_SENSOR_RESET (1 << 5)
|
|
|
|
#define PO1030_SUBSAMPLING (1 << 6)
|
|
|
|
/*****************************************************************************/
|
|
|
|
#define PO1030_GLOBAL_GAIN_DEFAULT 0x12
|
|
#define PO1030_EXPOSURE_DEFAULT 0x0085
|
|
#define PO1030_BLUE_GAIN_DEFAULT 0x36
|
|
#define PO1030_RED_GAIN_DEFAULT 0x36
|
|
#define PO1030_GREEN_GAIN_DEFAULT 0x40
|
|
|
|
/*****************************************************************************/
|
|
|
|
/* Kernel module parameters */
|
|
extern int force_sensor;
|
|
extern int dump_sensor;
|
|
|
|
int po1030_probe(struct sd *sd);
|
|
int po1030_init(struct sd *sd);
|
|
int po1030_start(struct sd *sd);
|
|
void po1030_disconnect(struct sd *sd);
|
|
|
|
static const struct m5602_sensor po1030 = {
|
|
.name = "PO1030",
|
|
|
|
.i2c_slave_id = 0xdc,
|
|
.i2c_regW = 1,
|
|
|
|
.probe = po1030_probe,
|
|
.init = po1030_init,
|
|
.start = po1030_start,
|
|
.disconnect = po1030_disconnect,
|
|
};
|
|
|
|
static const unsigned char preinit_po1030[][3] = {
|
|
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
|
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
|
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
|
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
|
|
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
|
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
|
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
|
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
|
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
|
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
|
|
|
|
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
|
|
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
|
|
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
|
{BRIDGE, M5602_XB_GPIO_DAT, 0x00}
|
|
};
|
|
|
|
static const unsigned char init_po1030[][3] = {
|
|
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
|
|
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
|
|
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
|
|
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
|
|
|
|
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
|
|
|
|
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
|
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
|
|
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
|
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
|
|
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
|
|
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
|
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
|
|
|
{SENSOR, PO1030_AUTOCTRL2, 0x04},
|
|
|
|
{SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
|
|
{SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
|
|
|
|
{SENSOR, PO1030_CONTROL2, 0x03},
|
|
{SENSOR, 0x21, 0x90},
|
|
{SENSOR, PO1030_YTARGET, 0x60},
|
|
{SENSOR, 0x59, 0x13},
|
|
{SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE},
|
|
{SENSOR, PO1030_EDGE_ENH_OFF, 0x00},
|
|
{SENSOR, PO1030_EGA, 0x80},
|
|
{SENSOR, 0x78, 0x14},
|
|
{SENSOR, 0x6f, 0x01},
|
|
{SENSOR, PO1030_GLOBALGAINMAX, 0x14},
|
|
{SENSOR, PO1030_Cb_U_GAIN, 0x38},
|
|
{SENSOR, PO1030_Cr_V_GAIN, 0x38},
|
|
{SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
|
|
PO1030_AUTO_SUBSAMPLING |
|
|
PO1030_FRAME_EQUAL},
|
|
{SENSOR, PO1030_GC0, 0x10},
|
|
{SENSOR, PO1030_GC1, 0x20},
|
|
{SENSOR, PO1030_GC2, 0x40},
|
|
{SENSOR, PO1030_GC3, 0x60},
|
|
{SENSOR, PO1030_GC4, 0x80},
|
|
{SENSOR, PO1030_GC5, 0xa0},
|
|
{SENSOR, PO1030_GC6, 0xc0},
|
|
{SENSOR, PO1030_GC7, 0xff},
|
|
|
|
/* Set the width to 751 */
|
|
{SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
|
|
{SENSOR, PO1030_FRAMEWIDTH_L, 0xef},
|
|
|
|
/* Set the height to 540 */
|
|
{SENSOR, PO1030_FRAMEHEIGHT_H, 0x02},
|
|
{SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c},
|
|
|
|
/* Set the x window to 1 */
|
|
{SENSOR, PO1030_WINDOWX_H, 0x00},
|
|
{SENSOR, PO1030_WINDOWX_L, 0x01},
|
|
|
|
/* Set the y window to 1 */
|
|
{SENSOR, PO1030_WINDOWY_H, 0x00},
|
|
{SENSOR, PO1030_WINDOWY_L, 0x01},
|
|
|
|
/* with a very low lighted environment increase the exposure but
|
|
* decrease the FPS (Frame Per Second) */
|
|
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
|
|
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
|
|
|
|
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
|
|
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
|
|
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
|
|
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
|
|
};
|
|
#endif
|