forked from Minki/linux
c302b2c959
Firmware >= 6/7.3.0.0.75 (wl127x/wl128x) supports both STA and AP roles. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
492 lines
11 KiB
C
492 lines
11 KiB
C
/*
|
|
* This file is part of wl1271
|
|
*
|
|
* Copyright (C) 2008-2009 Nokia Corporation
|
|
*
|
|
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/crc7.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/wl12xx.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "wl12xx.h"
|
|
#include "wl12xx_80211.h"
|
|
#include "io.h"
|
|
|
|
#include "reg.h"
|
|
|
|
#define WSPI_CMD_READ 0x40000000
|
|
#define WSPI_CMD_WRITE 0x00000000
|
|
#define WSPI_CMD_FIXED 0x20000000
|
|
#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
|
|
#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
|
|
#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
|
|
|
|
#define WSPI_INIT_CMD_CRC_LEN 5
|
|
|
|
#define WSPI_INIT_CMD_START 0x00
|
|
#define WSPI_INIT_CMD_TX 0x40
|
|
/* the extra bypass bit is sampled by the TNET as '1' */
|
|
#define WSPI_INIT_CMD_BYPASS_BIT 0x80
|
|
#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
|
|
#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
|
|
#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
|
|
#define WSPI_INIT_CMD_IOD 0x40
|
|
#define WSPI_INIT_CMD_IP 0x20
|
|
#define WSPI_INIT_CMD_CS 0x10
|
|
#define WSPI_INIT_CMD_WS 0x08
|
|
#define WSPI_INIT_CMD_WSPI 0x01
|
|
#define WSPI_INIT_CMD_END 0x01
|
|
|
|
#define WSPI_INIT_CMD_LEN 8
|
|
|
|
#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
|
|
((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
|
|
#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
|
|
|
|
/* HW limitation: maximum possible chunk size is 4095 bytes */
|
|
#define WSPI_MAX_CHUNK_SIZE 4092
|
|
|
|
#define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE)
|
|
|
|
static inline struct spi_device *wl_to_spi(struct wl1271 *wl)
|
|
{
|
|
return wl->if_priv;
|
|
}
|
|
|
|
static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl)
|
|
{
|
|
return &(wl_to_spi(wl)->dev);
|
|
}
|
|
|
|
static void wl1271_spi_disable_interrupts(struct wl1271 *wl)
|
|
{
|
|
disable_irq(wl->irq);
|
|
}
|
|
|
|
static void wl1271_spi_enable_interrupts(struct wl1271 *wl)
|
|
{
|
|
enable_irq(wl->irq);
|
|
}
|
|
|
|
static void wl1271_spi_reset(struct wl1271 *wl)
|
|
{
|
|
u8 *cmd;
|
|
struct spi_transfer t;
|
|
struct spi_message m;
|
|
|
|
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
|
|
if (!cmd) {
|
|
wl1271_error("could not allocate cmd for spi reset");
|
|
return;
|
|
}
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
spi_message_init(&m);
|
|
|
|
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
|
|
|
|
t.tx_buf = cmd;
|
|
t.len = WSPI_INIT_CMD_LEN;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
|
|
kfree(cmd);
|
|
}
|
|
|
|
static void wl1271_spi_init(struct wl1271 *wl)
|
|
{
|
|
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
|
|
struct spi_transfer t;
|
|
struct spi_message m;
|
|
|
|
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
|
|
if (!cmd) {
|
|
wl1271_error("could not allocate cmd for spi init");
|
|
return;
|
|
}
|
|
|
|
memset(crc, 0, sizeof(crc));
|
|
memset(&t, 0, sizeof(t));
|
|
spi_message_init(&m);
|
|
|
|
/*
|
|
* Set WSPI_INIT_COMMAND
|
|
* the data is being send from the MSB to LSB
|
|
*/
|
|
cmd[2] = 0xff;
|
|
cmd[3] = 0xff;
|
|
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
|
|
cmd[0] = 0;
|
|
cmd[7] = 0;
|
|
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
|
|
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
|
|
|
|
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
|
|
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
|
|
else
|
|
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
|
|
|
|
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
|
|
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
|
|
|
|
crc[0] = cmd[1];
|
|
crc[1] = cmd[0];
|
|
crc[2] = cmd[7];
|
|
crc[3] = cmd[6];
|
|
crc[4] = cmd[5];
|
|
|
|
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
|
|
cmd[4] |= WSPI_INIT_CMD_END;
|
|
|
|
t.tx_buf = cmd;
|
|
t.len = WSPI_INIT_CMD_LEN;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
|
|
kfree(cmd);
|
|
}
|
|
|
|
#define WL1271_BUSY_WORD_TIMEOUT 1000
|
|
|
|
static int wl1271_spi_read_busy(struct wl1271 *wl)
|
|
{
|
|
struct spi_transfer t[1];
|
|
struct spi_message m;
|
|
u32 *busy_buf;
|
|
int num_busy_bytes = 0;
|
|
|
|
/*
|
|
* Read further busy words from SPI until a non-busy word is
|
|
* encountered, then read the data itself into the buffer.
|
|
*/
|
|
|
|
num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
|
|
busy_buf = wl->buffer_busyword;
|
|
while (num_busy_bytes) {
|
|
num_busy_bytes--;
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
t[0].rx_buf = busy_buf;
|
|
t[0].len = sizeof(u32);
|
|
t[0].cs_change = true;
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
if (*busy_buf & 0x1)
|
|
return 0;
|
|
}
|
|
|
|
/* The SPI bus is unresponsive, the read failed. */
|
|
wl1271_error("SPI read busy-word timeout!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
|
|
size_t len, bool fixed)
|
|
{
|
|
struct spi_transfer t[2];
|
|
struct spi_message m;
|
|
u32 *busy_buf;
|
|
u32 *cmd;
|
|
u32 chunk_len;
|
|
|
|
while (len > 0) {
|
|
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
|
|
|
|
cmd = &wl->buffer_cmd;
|
|
busy_buf = wl->buffer_busyword;
|
|
|
|
*cmd = 0;
|
|
*cmd |= WSPI_CMD_READ;
|
|
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
|
|
WSPI_CMD_BYTE_LENGTH;
|
|
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
|
|
|
|
if (fixed)
|
|
*cmd |= WSPI_CMD_FIXED;
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = cmd;
|
|
t[0].len = 4;
|
|
t[0].cs_change = true;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
/* Busy and non busy words read */
|
|
t[1].rx_buf = busy_buf;
|
|
t[1].len = WL1271_BUSY_WORD_LEN;
|
|
t[1].cs_change = true;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
|
|
wl1271_spi_read_busy(wl)) {
|
|
memset(buf, 0, chunk_len);
|
|
return;
|
|
}
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].rx_buf = buf;
|
|
t[0].len = chunk_len;
|
|
t[0].cs_change = true;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
|
|
wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len);
|
|
|
|
if (!fixed)
|
|
addr += chunk_len;
|
|
buf += chunk_len;
|
|
len -= chunk_len;
|
|
}
|
|
}
|
|
|
|
static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
|
|
size_t len, bool fixed)
|
|
{
|
|
struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
|
|
struct spi_message m;
|
|
u32 commands[WSPI_MAX_NUM_OF_CHUNKS];
|
|
u32 *cmd;
|
|
u32 chunk_len;
|
|
int i;
|
|
|
|
WARN_ON(len > WL1271_AGGR_BUFFER_SIZE);
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
cmd = &commands[0];
|
|
i = 0;
|
|
while (len > 0) {
|
|
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
|
|
|
|
*cmd = 0;
|
|
*cmd |= WSPI_CMD_WRITE;
|
|
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
|
|
WSPI_CMD_BYTE_LENGTH;
|
|
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
|
|
|
|
if (fixed)
|
|
*cmd |= WSPI_CMD_FIXED;
|
|
|
|
t[i].tx_buf = cmd;
|
|
t[i].len = sizeof(*cmd);
|
|
spi_message_add_tail(&t[i++], &m);
|
|
|
|
t[i].tx_buf = buf;
|
|
t[i].len = chunk_len;
|
|
spi_message_add_tail(&t[i++], &m);
|
|
|
|
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
|
|
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len);
|
|
|
|
if (!fixed)
|
|
addr += chunk_len;
|
|
buf += chunk_len;
|
|
len -= chunk_len;
|
|
cmd++;
|
|
}
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
}
|
|
|
|
static irqreturn_t wl1271_hardirq(int irq, void *cookie)
|
|
{
|
|
struct wl1271 *wl = cookie;
|
|
unsigned long flags;
|
|
|
|
wl1271_debug(DEBUG_IRQ, "IRQ");
|
|
|
|
/* complete the ELP completion */
|
|
spin_lock_irqsave(&wl->wl_lock, flags);
|
|
set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
|
|
if (wl->elp_compl) {
|
|
complete(wl->elp_compl);
|
|
wl->elp_compl = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&wl->wl_lock, flags);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static int wl1271_spi_set_power(struct wl1271 *wl, bool enable)
|
|
{
|
|
if (wl->set_power)
|
|
wl->set_power(enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct wl1271_if_operations spi_ops = {
|
|
.read = wl1271_spi_raw_read,
|
|
.write = wl1271_spi_raw_write,
|
|
.reset = wl1271_spi_reset,
|
|
.init = wl1271_spi_init,
|
|
.power = wl1271_spi_set_power,
|
|
.dev = wl1271_spi_wl_to_dev,
|
|
.enable_irq = wl1271_spi_enable_interrupts,
|
|
.disable_irq = wl1271_spi_disable_interrupts,
|
|
.set_block_size = NULL,
|
|
};
|
|
|
|
static int __devinit wl1271_probe(struct spi_device *spi)
|
|
{
|
|
struct wl12xx_platform_data *pdata;
|
|
struct ieee80211_hw *hw;
|
|
struct wl1271 *wl;
|
|
unsigned long irqflags;
|
|
int ret;
|
|
|
|
pdata = spi->dev.platform_data;
|
|
if (!pdata) {
|
|
wl1271_error("no platform data");
|
|
return -ENODEV;
|
|
}
|
|
|
|
hw = wl1271_alloc_hw();
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
wl = hw->priv;
|
|
|
|
dev_set_drvdata(&spi->dev, wl);
|
|
wl->if_priv = spi;
|
|
|
|
wl->if_ops = &spi_ops;
|
|
|
|
/* This is the only SPI value that we need to set here, the rest
|
|
* comes from the board-peripherals file */
|
|
spi->bits_per_word = 32;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
wl1271_error("spi_setup failed");
|
|
goto out_free;
|
|
}
|
|
|
|
wl->set_power = pdata->set_power;
|
|
if (!wl->set_power) {
|
|
wl1271_error("set power function missing in platform data");
|
|
ret = -ENODEV;
|
|
goto out_free;
|
|
}
|
|
|
|
wl->ref_clock = pdata->board_ref_clock;
|
|
wl->tcxo_clock = pdata->board_tcxo_clock;
|
|
wl->platform_quirks = pdata->platform_quirks;
|
|
|
|
if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
|
|
irqflags = IRQF_TRIGGER_RISING;
|
|
else
|
|
irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
|
|
|
|
wl->irq = spi->irq;
|
|
if (wl->irq < 0) {
|
|
wl1271_error("irq missing in platform data");
|
|
ret = -ENODEV;
|
|
goto out_free;
|
|
}
|
|
|
|
ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
|
|
irqflags,
|
|
DRIVER_NAME, wl);
|
|
if (ret < 0) {
|
|
wl1271_error("request_irq() failed: %d", ret);
|
|
goto out_free;
|
|
}
|
|
|
|
disable_irq(wl->irq);
|
|
|
|
ret = wl1271_init_ieee80211(wl);
|
|
if (ret)
|
|
goto out_irq;
|
|
|
|
ret = wl1271_register_hw(wl);
|
|
if (ret)
|
|
goto out_irq;
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
free_irq(wl->irq, wl);
|
|
|
|
out_free:
|
|
wl1271_free_hw(wl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit wl1271_remove(struct spi_device *spi)
|
|
{
|
|
struct wl1271 *wl = dev_get_drvdata(&spi->dev);
|
|
|
|
wl1271_unregister_hw(wl);
|
|
free_irq(wl->irq, wl);
|
|
wl1271_free_hw(wl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct spi_driver wl1271_spi_driver = {
|
|
.driver = {
|
|
.name = "wl1271_spi",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = wl1271_probe,
|
|
.remove = __devexit_p(wl1271_remove),
|
|
};
|
|
|
|
static int __init wl1271_init(void)
|
|
{
|
|
return spi_register_driver(&wl1271_spi_driver);
|
|
}
|
|
|
|
static void __exit wl1271_exit(void)
|
|
{
|
|
spi_unregister_driver(&wl1271_spi_driver);
|
|
}
|
|
|
|
module_init(wl1271_init);
|
|
module_exit(wl1271_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
|
|
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
|
|
MODULE_FIRMWARE(WL127X_FW_NAME);
|
|
MODULE_FIRMWARE(WL128X_FW_NAME);
|
|
MODULE_ALIAS("spi:wl1271");
|