forked from Minki/linux
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
267 lines
8.0 KiB
C
267 lines
8.0 KiB
C
/*======================================================================
|
|
|
|
A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.
|
|
|
|
This driver supports the Adaptec AHA-1460, the New Media Bus
|
|
Toaster, and the New Media Toast & Jam.
|
|
|
|
aha152x_cs.c 1.54 2000/06/12 21:27:25
|
|
|
|
The contents of this file are subject to the Mozilla Public
|
|
License Version 1.1 (the "License"); you may not use this file
|
|
except in compliance with the License. You may obtain a copy of
|
|
the License at http://www.mozilla.org/MPL/
|
|
|
|
Software distributed under the License is distributed on an "AS
|
|
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
|
|
implied. See the License for the specific language governing
|
|
rights and limitations under the License.
|
|
|
|
The initial developer of the original code is David A. Hinds
|
|
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
|
|
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
|
|
|
|
Alternatively, the contents of this file may be used under the
|
|
terms of the GNU General Public License version 2 (the "GPL"), in which
|
|
case the provisions of the GPL are applicable instead of the
|
|
above. If you wish to allow the use of your version of this file
|
|
only under the terms of the GPL and not to allow others to use
|
|
your version of this file under the MPL, indicate your decision
|
|
by deleting the provisions above and replace them with the notice
|
|
and other provisions required by the GPL. If you do not delete
|
|
the provisions above, a recipient may use your version of this
|
|
file under either the MPL or the GPL.
|
|
|
|
======================================================================*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <scsi/scsi.h>
|
|
#include <linux/major.h>
|
|
#include <linux/blkdev.h>
|
|
#include <scsi/scsi_ioctl.h>
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "aha152x.h"
|
|
|
|
#include <pcmcia/cs_types.h>
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
#ifdef PCMCIA_DEBUG
|
|
static int pc_debug = PCMCIA_DEBUG;
|
|
module_param(pc_debug, int, 0644);
|
|
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
|
|
static char *version =
|
|
"aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
|
|
#else
|
|
#define DEBUG(n, args...)
|
|
#endif
|
|
|
|
/*====================================================================*/
|
|
|
|
/* Parameters that can be set with 'insmod' */
|
|
|
|
/* SCSI bus setup options */
|
|
static int host_id = 7;
|
|
static int reconnect = 1;
|
|
static int parity = 1;
|
|
static int synchronous = 1;
|
|
static int reset_delay = 100;
|
|
static int ext_trans = 0;
|
|
|
|
module_param(host_id, int, 0);
|
|
module_param(reconnect, int, 0);
|
|
module_param(parity, int, 0);
|
|
module_param(synchronous, int, 0);
|
|
module_param(reset_delay, int, 0);
|
|
module_param(ext_trans, int, 0);
|
|
|
|
MODULE_LICENSE("Dual MPL/GPL");
|
|
|
|
/*====================================================================*/
|
|
|
|
typedef struct scsi_info_t {
|
|
struct pcmcia_device *p_dev;
|
|
dev_node_t node;
|
|
struct Scsi_Host *host;
|
|
} scsi_info_t;
|
|
|
|
static void aha152x_release_cs(struct pcmcia_device *link);
|
|
static void aha152x_detach(struct pcmcia_device *p_dev);
|
|
static int aha152x_config_cs(struct pcmcia_device *link);
|
|
|
|
static struct pcmcia_device *dev_list;
|
|
|
|
static int aha152x_probe(struct pcmcia_device *link)
|
|
{
|
|
scsi_info_t *info;
|
|
|
|
DEBUG(0, "aha152x_attach()\n");
|
|
|
|
/* Create new SCSI device */
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) return -ENOMEM;
|
|
memset(info, 0, sizeof(*info));
|
|
info->p_dev = link;
|
|
link->priv = info;
|
|
|
|
link->io.NumPorts1 = 0x20;
|
|
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
|
|
link->io.IOAddrLines = 10;
|
|
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
|
|
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
|
|
link->conf.Attributes = CONF_ENABLE_IRQ;
|
|
link->conf.IntType = INT_MEMORY_AND_IO;
|
|
link->conf.Present = PRESENT_OPTION;
|
|
|
|
return aha152x_config_cs(link);
|
|
} /* aha152x_attach */
|
|
|
|
/*====================================================================*/
|
|
|
|
static void aha152x_detach(struct pcmcia_device *link)
|
|
{
|
|
DEBUG(0, "aha152x_detach(0x%p)\n", link);
|
|
|
|
aha152x_release_cs(link);
|
|
|
|
/* Unlink device structure, free bits */
|
|
kfree(link->priv);
|
|
} /* aha152x_detach */
|
|
|
|
/*====================================================================*/
|
|
|
|
#define CS_CHECK(fn, ret) \
|
|
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
|
|
|
|
static int aha152x_config_cs(struct pcmcia_device *link)
|
|
{
|
|
scsi_info_t *info = link->priv;
|
|
struct aha152x_setup s;
|
|
tuple_t tuple;
|
|
cisparse_t parse;
|
|
int i, last_ret, last_fn;
|
|
u_char tuple_data[64];
|
|
struct Scsi_Host *host;
|
|
|
|
DEBUG(0, "aha152x_config(0x%p)\n", link);
|
|
|
|
tuple.TupleData = tuple_data;
|
|
tuple.TupleDataMax = 64;
|
|
tuple.TupleOffset = 0;
|
|
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
|
|
tuple.Attributes = 0;
|
|
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
|
|
while (1) {
|
|
if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
|
|
pcmcia_parse_tuple(link, &tuple, &parse) != 0)
|
|
goto next_entry;
|
|
/* For New Media T&J, look for a SCSI window */
|
|
if (parse.cftable_entry.io.win[0].len >= 0x20)
|
|
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
|
|
else if ((parse.cftable_entry.io.nwin > 1) &&
|
|
(parse.cftable_entry.io.win[1].len >= 0x20))
|
|
link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
|
|
if ((parse.cftable_entry.io.nwin > 0) &&
|
|
(link->io.BasePort1 < 0xffff)) {
|
|
link->conf.ConfigIndex = parse.cftable_entry.index;
|
|
i = pcmcia_request_io(link, &link->io);
|
|
if (i == CS_SUCCESS) break;
|
|
}
|
|
next_entry:
|
|
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
|
|
}
|
|
|
|
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
|
|
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
|
|
|
|
/* Set configuration options for the aha152x driver */
|
|
memset(&s, 0, sizeof(s));
|
|
s.conf = "PCMCIA setup";
|
|
s.io_port = link->io.BasePort1;
|
|
s.irq = link->irq.AssignedIRQ;
|
|
s.scsiid = host_id;
|
|
s.reconnect = reconnect;
|
|
s.parity = parity;
|
|
s.synchronous = synchronous;
|
|
s.delay = reset_delay;
|
|
if (ext_trans)
|
|
s.ext_trans = ext_trans;
|
|
|
|
host = aha152x_probe_one(&s);
|
|
if (host == NULL) {
|
|
printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
|
|
goto cs_failed;
|
|
}
|
|
|
|
sprintf(info->node.dev_name, "scsi%d", host->host_no);
|
|
link->dev_node = &info->node;
|
|
info->host = host;
|
|
|
|
return 0;
|
|
|
|
cs_failed:
|
|
cs_error(link, last_fn, last_ret);
|
|
aha152x_release_cs(link);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void aha152x_release_cs(struct pcmcia_device *link)
|
|
{
|
|
scsi_info_t *info = link->priv;
|
|
|
|
aha152x_release(info->host);
|
|
pcmcia_disable_device(link);
|
|
}
|
|
|
|
static int aha152x_resume(struct pcmcia_device *link)
|
|
{
|
|
scsi_info_t *info = link->priv;
|
|
|
|
aha152x_host_reset_host(info->host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pcmcia_device_id aha152x_ids[] = {
|
|
PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
|
|
PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
|
|
PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
|
|
PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
|
|
PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
|
|
PCMCIA_DEVICE_NULL,
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);
|
|
|
|
static struct pcmcia_driver aha152x_cs_driver = {
|
|
.owner = THIS_MODULE,
|
|
.drv = {
|
|
.name = "aha152x_cs",
|
|
},
|
|
.probe = aha152x_probe,
|
|
.remove = aha152x_detach,
|
|
.id_table = aha152x_ids,
|
|
.resume = aha152x_resume,
|
|
};
|
|
|
|
static int __init init_aha152x_cs(void)
|
|
{
|
|
return pcmcia_register_driver(&aha152x_cs_driver);
|
|
}
|
|
|
|
static void __exit exit_aha152x_cs(void)
|
|
{
|
|
pcmcia_unregister_driver(&aha152x_cs_driver);
|
|
BUG_ON(dev_list != NULL);
|
|
}
|
|
|
|
module_init(init_aha152x_cs);
|
|
module_exit(exit_aha152x_cs);
|