forked from Minki/linux
248 lines
6.3 KiB
C
248 lines
6.3 KiB
C
/*
|
|
* CLPS711X SPI bus driver
|
|
*
|
|
* Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/clps711x.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/platform_data/spi-clps711x.h>
|
|
|
|
#define DRIVER_NAME "spi-clps711x"
|
|
|
|
#define SYNCIO_FRMLEN(x) ((x) << 8)
|
|
#define SYNCIO_TXFRMEN (1 << 14)
|
|
|
|
struct spi_clps711x_data {
|
|
void __iomem *syncio;
|
|
struct regmap *syscon;
|
|
struct regmap *syscon1;
|
|
struct clk *spi_clk;
|
|
|
|
u8 *tx_buf;
|
|
u8 *rx_buf;
|
|
unsigned int bpw;
|
|
int len;
|
|
};
|
|
|
|
static int spi_clps711x_setup(struct spi_device *spi)
|
|
{
|
|
/* We are expect that SPI-device is not selected */
|
|
gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_clps711x_setup_xfer(struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
|
|
|
|
/* Setup SPI frequency divider */
|
|
if (xfer->speed_hz >= master->max_speed_hz)
|
|
regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
|
|
SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3));
|
|
else if (xfer->speed_hz >= (master->max_speed_hz / 2))
|
|
regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
|
|
SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2));
|
|
else if (xfer->speed_hz >= (master->max_speed_hz / 8))
|
|
regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
|
|
SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1));
|
|
else
|
|
regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
|
|
SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0));
|
|
}
|
|
|
|
static int spi_clps711x_prepare_message(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
|
|
struct spi_device *spi = msg->spi;
|
|
|
|
/* Setup mode for transfer */
|
|
return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
|
|
(spi->mode & SPI_CPHA) ?
|
|
SYSCON3_ADCCKNSEN : 0);
|
|
}
|
|
|
|
static int spi_clps711x_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
|
|
u8 data;
|
|
|
|
spi_clps711x_setup_xfer(spi, xfer);
|
|
|
|
hw->len = xfer->len;
|
|
hw->bpw = xfer->bits_per_word;
|
|
hw->tx_buf = (u8 *)xfer->tx_buf;
|
|
hw->rx_buf = (u8 *)xfer->rx_buf;
|
|
|
|
/* Initiate transfer */
|
|
data = hw->tx_buf ? *hw->tx_buf++ : 0;
|
|
writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
|
|
{
|
|
struct spi_master *master = dev_id;
|
|
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
|
|
u8 data;
|
|
|
|
/* Handle RX */
|
|
data = readb(hw->syncio);
|
|
if (hw->rx_buf)
|
|
*hw->rx_buf++ = data;
|
|
|
|
/* Handle TX */
|
|
if (--hw->len > 0) {
|
|
data = hw->tx_buf ? *hw->tx_buf++ : 0;
|
|
writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
|
|
hw->syncio);
|
|
} else
|
|
spi_finalize_current_transfer(master);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int spi_clps711x_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_clps711x_data *hw;
|
|
struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev);
|
|
struct spi_master *master;
|
|
struct resource *res;
|
|
int i, irq, ret;
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No platform data supplied\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->num_chipselect < 1) {
|
|
dev_err(&pdev->dev, "At least one CS must be defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*hw));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
master->cs_gpios = devm_kzalloc(&pdev->dev, sizeof(int) *
|
|
pdata->num_chipselect, GFP_KERNEL);
|
|
if (!master->cs_gpios) {
|
|
ret = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
master->bus_num = pdev->id;
|
|
master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
|
|
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8);
|
|
master->num_chipselect = pdata->num_chipselect;
|
|
master->setup = spi_clps711x_setup;
|
|
master->prepare_message = spi_clps711x_prepare_message;
|
|
master->transfer_one = spi_clps711x_transfer_one;
|
|
|
|
hw = spi_master_get_devdata(master);
|
|
|
|
for (i = 0; i < master->num_chipselect; i++) {
|
|
master->cs_gpios[i] = pdata->chipselect[i];
|
|
ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i],
|
|
DRIVER_NAME);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i);
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
hw->spi_clk = devm_clk_get(&pdev->dev, "spi");
|
|
if (IS_ERR(hw->spi_clk)) {
|
|
dev_err(&pdev->dev, "Can't get clocks\n");
|
|
ret = PTR_ERR(hw->spi_clk);
|
|
goto err_out;
|
|
}
|
|
master->max_speed_hz = clk_get_rate(hw->spi_clk);
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
|
|
if (IS_ERR(hw->syscon)) {
|
|
ret = PTR_ERR(hw->syscon);
|
|
goto err_out;
|
|
}
|
|
|
|
hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1");
|
|
if (IS_ERR(hw->syscon1)) {
|
|
ret = PTR_ERR(hw->syscon1);
|
|
goto err_out;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hw->syncio = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hw->syncio)) {
|
|
ret = PTR_ERR(hw->syncio);
|
|
goto err_out;
|
|
}
|
|
|
|
/* Disable extended mode due hardware problems */
|
|
regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);
|
|
|
|
/* Clear possible pending interrupt */
|
|
readl(hw->syncio);
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
|
|
dev_name(&pdev->dev), master);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (!ret) {
|
|
dev_info(&pdev->dev,
|
|
"SPI bus driver initialized. Master clock %u Hz\n",
|
|
master->max_speed_hz);
|
|
return 0;
|
|
}
|
|
|
|
dev_err(&pdev->dev, "Failed to register master\n");
|
|
|
|
err_out:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver clps711x_spi_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = spi_clps711x_probe,
|
|
};
|
|
module_platform_driver(clps711x_spi_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
|
|
MODULE_DESCRIPTION("CLPS711X SPI bus driver");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|