forked from Minki/linux
cc3b68fea2
Now that we only ack irq 0 the code can be simplified a lot. Also switch from read / modify / write to a simple write clear: 1) This is what the android code does (it has a hack for acking irq 0 in its unmask code doing this) 2) read / modify / write simply does not make sense for an irq status register like this, if the other bits are writeable (and the data sheet says they are not) they should be write 1 to clear, since otherwise a read / modify / write can race with a device raising an interrupt and then clear the pending bit unintentionally Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1394895894-8891-3-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
162 lines
4.5 KiB
C
162 lines
4.5 KiB
C
/*
|
|
* Allwinner A1X SoCs IRQ chip driver.
|
|
*
|
|
* Copyright (C) 2012 Maxime Ripard
|
|
*
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* Based on code from
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Benn Huang <benn@allwinnertech.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <asm/exception.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include "irqchip.h"
|
|
|
|
#define SUN4I_IRQ_VECTOR_REG 0x00
|
|
#define SUN4I_IRQ_PROTECTION_REG 0x08
|
|
#define SUN4I_IRQ_NMI_CTRL_REG 0x0c
|
|
#define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x)
|
|
#define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x)
|
|
#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x)
|
|
#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x)
|
|
|
|
static void __iomem *sun4i_irq_base;
|
|
static struct irq_domain *sun4i_irq_domain;
|
|
|
|
static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs);
|
|
|
|
static void sun4i_irq_ack(struct irq_data *irqd)
|
|
{
|
|
unsigned int irq = irqd_to_hwirq(irqd);
|
|
|
|
if (irq != 0)
|
|
return; /* Only IRQ 0 / the ENMI needs to be acked */
|
|
|
|
writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
|
|
}
|
|
|
|
static void sun4i_irq_mask(struct irq_data *irqd)
|
|
{
|
|
unsigned int irq = irqd_to_hwirq(irqd);
|
|
unsigned int irq_off = irq % 32;
|
|
int reg = irq / 32;
|
|
u32 val;
|
|
|
|
val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
|
|
writel(val & ~(1 << irq_off),
|
|
sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
|
|
}
|
|
|
|
static void sun4i_irq_unmask(struct irq_data *irqd)
|
|
{
|
|
unsigned int irq = irqd_to_hwirq(irqd);
|
|
unsigned int irq_off = irq % 32;
|
|
int reg = irq / 32;
|
|
u32 val;
|
|
|
|
val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
|
|
writel(val | (1 << irq_off),
|
|
sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
|
|
}
|
|
|
|
static struct irq_chip sun4i_irq_chip = {
|
|
.name = "sun4i_irq",
|
|
.irq_eoi = sun4i_irq_ack,
|
|
.irq_mask = sun4i_irq_mask,
|
|
.irq_unmask = sun4i_irq_unmask,
|
|
.flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
|
|
};
|
|
|
|
static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq);
|
|
set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops sun4i_irq_ops = {
|
|
.map = sun4i_irq_map,
|
|
.xlate = irq_domain_xlate_onecell,
|
|
};
|
|
|
|
static int __init sun4i_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
sun4i_irq_base = of_iomap(node, 0);
|
|
if (!sun4i_irq_base)
|
|
panic("%s: unable to map IC registers\n",
|
|
node->full_name);
|
|
|
|
/* Disable all interrupts */
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(0));
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1));
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2));
|
|
|
|
/* Unmask all the interrupts, ENABLE_REG(x) is used for masking */
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0));
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1));
|
|
writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2));
|
|
|
|
/* Clear all the pending interrupts */
|
|
writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
|
|
writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1));
|
|
writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2));
|
|
|
|
/* Enable protection mode */
|
|
writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG);
|
|
|
|
/* Configure the external interrupt source type */
|
|
writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG);
|
|
|
|
sun4i_irq_domain = irq_domain_add_linear(node, 3 * 32,
|
|
&sun4i_irq_ops, NULL);
|
|
if (!sun4i_irq_domain)
|
|
panic("%s: unable to create IRQ domain\n", node->full_name);
|
|
|
|
set_handle_irq(sun4i_handle_irq);
|
|
|
|
return 0;
|
|
}
|
|
IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_of_init);
|
|
|
|
static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs)
|
|
{
|
|
u32 irq, hwirq;
|
|
|
|
/*
|
|
* hwirq == 0 can mean one of 3 things:
|
|
* 1) no more irqs pending
|
|
* 2) irq 0 pending
|
|
* 3) spurious irq
|
|
* So if we immediately get a reading of 0, check the irq-pending reg
|
|
* to differentiate between 2 and 3. We only do this once to avoid
|
|
* the extra check in the common case of 1 hapening after having
|
|
* read the vector-reg once.
|
|
*/
|
|
hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
|
|
if (hwirq == 0 &&
|
|
!(readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)) & BIT(0)))
|
|
return;
|
|
|
|
do {
|
|
irq = irq_find_mapping(sun4i_irq_domain, hwirq);
|
|
handle_IRQ(irq, regs);
|
|
hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
|
|
} while (hwirq != 0);
|
|
}
|