linux/drivers/scsi/cxlflash/superpipe.c
Manoj N. Kumar 635f6b0893 cxlflash: Fix to resolve dead-lock during EEH recovery
When a cxlflash adapter goes into EEH recovery and multiple processes
(each having established its own context) are active, the EEH recovery
can hang if the processes attempt to recover in parallel. The symptom
logged after a couple of minutes is:

INFO: task eehd:48 blocked for more than 120 seconds.
Not tainted 4.5.0-491-26f710d+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
eehd            0    48      2
Call Trace:
__switch_to+0x2f0/0x410
__schedule+0x300/0x980
schedule+0x48/0xc0
rwsem_down_write_failed+0x294/0x410
down_write+0x88/0xb0
cxlflash_pci_error_detected+0x100/0x1c0 [cxlflash]
cxl_vphb_error_detected+0x88/0x110 [cxl]
cxl_pci_error_detected+0xb0/0x1d0 [cxl]
eeh_report_error+0xbc/0x130
eeh_pe_dev_traverse+0x94/0x160
eeh_handle_normal_event+0x17c/0x450
eeh_handle_event+0x184/0x370
eeh_event_handler+0x1c8/0x1d0
kthread+0x110/0x130
ret_from_kernel_thread+0x5c/0xa4
INFO: task blockio:33215 blocked for more than 120 seconds.

Not tainted 4.5.0-491-26f710d+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
blockio         0 33215  33213
Call Trace:
0x1 (unreliable)
__switch_to+0x2f0/0x410
__schedule+0x300/0x980
schedule+0x48/0xc0
rwsem_down_read_failed+0x124/0x1d0
down_read+0x68/0x80
cxlflash_ioctl+0x70/0x6f0 [cxlflash]
scsi_ioctl+0x3b0/0x4c0
sg_ioctl+0x960/0x1010
do_vfs_ioctl+0xd8/0x8c0
SyS_ioctl+0xd4/0xf0
system_call+0x38/0xb4
INFO: task eehd:48 blocked for more than 120 seconds.

The hang is because of a 3 way dead-lock:

Process A holds the recovery mutex, and waits for eehd to complete.
Process B holds the semaphore and waits for the recovery mutex.
eehd waits for semaphore.

The fix is to have Process B above release the semaphore before
attempting to acquire the recovery mutex. This will allow
eehd to proceed to completion.

Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-05 21:02:17 -04:00

2184 lines
60 KiB
C

/*
* CXL Flash Device Driver
*
* Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation
* Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation
*
* Copyright (C) 2015 IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/file.h>
#include <linux/syscalls.h>
#include <misc/cxl.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_eh.h>
#include <uapi/scsi/cxlflash_ioctl.h>
#include "sislite.h"
#include "common.h"
#include "vlun.h"
#include "superpipe.h"
struct cxlflash_global global;
/**
* marshal_rele_to_resize() - translate release to resize structure
* @rele: Source structure from which to translate/copy.
* @resize: Destination structure for the translate/copy.
*/
static void marshal_rele_to_resize(struct dk_cxlflash_release *release,
struct dk_cxlflash_resize *resize)
{
resize->hdr = release->hdr;
resize->context_id = release->context_id;
resize->rsrc_handle = release->rsrc_handle;
}
/**
* marshal_det_to_rele() - translate detach to release structure
* @detach: Destination structure for the translate/copy.
* @rele: Source structure from which to translate/copy.
*/
static void marshal_det_to_rele(struct dk_cxlflash_detach *detach,
struct dk_cxlflash_release *release)
{
release->hdr = detach->hdr;
release->context_id = detach->context_id;
}
/**
* cxlflash_free_errpage() - frees resources associated with global error page
*/
void cxlflash_free_errpage(void)
{
mutex_lock(&global.mutex);
if (global.err_page) {
__free_page(global.err_page);
global.err_page = NULL;
}
mutex_unlock(&global.mutex);
}
/**
* cxlflash_stop_term_user_contexts() - stops/terminates known user contexts
* @cfg: Internal structure associated with the host.
*
* When the host needs to go down, all users must be quiesced and their
* memory freed. This is accomplished by putting the contexts in error
* state which will notify the user and let them 'drive' the tear down.
* Meanwhile, this routine camps until all user contexts have been removed.
*/
void cxlflash_stop_term_user_contexts(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
int i, found;
cxlflash_mark_contexts_error(cfg);
while (true) {
found = false;
for (i = 0; i < MAX_CONTEXT; i++)
if (cfg->ctx_tbl[i]) {
found = true;
break;
}
if (!found && list_empty(&cfg->ctx_err_recovery))
return;
dev_dbg(dev, "%s: Wait for user contexts to quiesce...\n",
__func__);
wake_up_all(&cfg->reset_waitq);
ssleep(1);
}
}
/**
* find_error_context() - locates a context by cookie on the error recovery list
* @cfg: Internal structure associated with the host.
* @rctxid: Desired context by id.
* @file: Desired context by file.
*
* Return: Found context on success, NULL on failure
*/
static struct ctx_info *find_error_context(struct cxlflash_cfg *cfg, u64 rctxid,
struct file *file)
{
struct ctx_info *ctxi;
list_for_each_entry(ctxi, &cfg->ctx_err_recovery, list)
if ((ctxi->ctxid == rctxid) || (ctxi->file == file))
return ctxi;
return NULL;
}
/**
* get_context() - obtains a validated and locked context reference
* @cfg: Internal structure associated with the host.
* @rctxid: Desired context (raw, un-decoded format).
* @arg: LUN information or file associated with request.
* @ctx_ctrl: Control information to 'steer' desired lookup.
*
* NOTE: despite the name pid, in linux, current->pid actually refers
* to the lightweight process id (tid) and can change if the process is
* multi threaded. The tgid remains constant for the process and only changes
* when the process of fork. For all intents and purposes, think of tgid
* as a pid in the traditional sense.
*
* Return: Validated context on success, NULL on failure
*/
struct ctx_info *get_context(struct cxlflash_cfg *cfg, u64 rctxid,
void *arg, enum ctx_ctrl ctx_ctrl)
{
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct lun_access *lun_access = NULL;
struct file *file = NULL;
struct llun_info *lli = arg;
u64 ctxid = DECODE_CTXID(rctxid);
int rc;
pid_t pid = current->tgid, ctxpid = 0;
if (ctx_ctrl & CTX_CTRL_FILE) {
lli = NULL;
file = (struct file *)arg;
}
if (ctx_ctrl & CTX_CTRL_CLONE)
pid = current->parent->tgid;
if (likely(ctxid < MAX_CONTEXT)) {
while (true) {
mutex_lock(&cfg->ctx_tbl_list_mutex);
ctxi = cfg->ctx_tbl[ctxid];
if (ctxi)
if ((file && (ctxi->file != file)) ||
(!file && (ctxi->ctxid != rctxid)))
ctxi = NULL;
if ((ctx_ctrl & CTX_CTRL_ERR) ||
(!ctxi && (ctx_ctrl & CTX_CTRL_ERR_FALLBACK)))
ctxi = find_error_context(cfg, rctxid, file);
if (!ctxi) {
mutex_unlock(&cfg->ctx_tbl_list_mutex);
goto out;
}
/*
* Need to acquire ownership of the context while still
* under the table/list lock to serialize with a remove
* thread. Use the 'try' to avoid stalling the
* table/list lock for a single context.
*
* Note that the lock order is:
*
* cfg->ctx_tbl_list_mutex -> ctxi->mutex
*
* Therefore release ctx_tbl_list_mutex before retrying.
*/
rc = mutex_trylock(&ctxi->mutex);
mutex_unlock(&cfg->ctx_tbl_list_mutex);
if (rc)
break; /* got the context's lock! */
}
if (ctxi->unavail)
goto denied;
ctxpid = ctxi->pid;
if (likely(!(ctx_ctrl & CTX_CTRL_NOPID)))
if (pid != ctxpid)
goto denied;
if (lli) {
list_for_each_entry(lun_access, &ctxi->luns, list)
if (lun_access->lli == lli)
goto out;
goto denied;
}
}
out:
dev_dbg(dev, "%s: rctxid=%016llX ctxinfo=%p ctxpid=%u pid=%u "
"ctx_ctrl=%u\n", __func__, rctxid, ctxi, ctxpid, pid,
ctx_ctrl);
return ctxi;
denied:
mutex_unlock(&ctxi->mutex);
ctxi = NULL;
goto out;
}
/**
* put_context() - release a context that was retrieved from get_context()
* @ctxi: Context to release.
*
* For now, releasing the context equates to unlocking it's mutex.
*/
void put_context(struct ctx_info *ctxi)
{
mutex_unlock(&ctxi->mutex);
}
/**
* afu_attach() - attach a context to the AFU
* @cfg: Internal structure associated with the host.
* @ctxi: Context to attach.
*
* Upon setting the context capabilities, they must be confirmed with
* a read back operation as the context might have been closed since
* the mailbox was unlocked. When this occurs, registration is failed.
*
* Return: 0 on success, -errno on failure
*/
static int afu_attach(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
{
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct sisl_ctrl_map __iomem *ctrl_map = ctxi->ctrl_map;
int rc = 0;
u64 val;
/* Unlock cap and restrict user to read/write cmds in translated mode */
readq_be(&ctrl_map->mbox_r);
val = (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD);
writeq_be(val, &ctrl_map->ctx_cap);
val = readq_be(&ctrl_map->ctx_cap);
if (val != (SISL_CTX_CAP_READ_CMD | SISL_CTX_CAP_WRITE_CMD)) {
dev_err(dev, "%s: ctx may be closed val=%016llX\n",
__func__, val);
rc = -EAGAIN;
goto out;
}
/* Set up MMIO registers pointing to the RHT */
writeq_be((u64)ctxi->rht_start, &ctrl_map->rht_start);
val = SISL_RHT_CNT_ID((u64)MAX_RHT_PER_CONTEXT, (u64)(afu->ctx_hndl));
writeq_be(val, &ctrl_map->rht_cnt_id);
out:
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
/**
* read_cap16() - issues a SCSI READ_CAP16 command
* @sdev: SCSI device associated with LUN.
* @lli: LUN destined for capacity request.
*
* The READ_CAP16 can take quite a while to complete. Should an EEH occur while
* in scsi_execute(), the EEH handler will attempt to recover. As part of the
* recovery, the handler drains all currently running ioctls, waiting until they
* have completed before proceeding with a reset. As this routine is used on the
* ioctl path, this can create a condition where the EEH handler becomes stuck,
* infinitely waiting for this ioctl thread. To avoid this behavior, temporarily
* unmark this thread as an ioctl thread by releasing the ioctl read semaphore.
* This will allow the EEH handler to proceed with a recovery while this thread
* is still running. Once the scsi_execute() returns, reacquire the ioctl read
* semaphore and check the adapter state in case it changed while inside of
* scsi_execute(). The state check will wait if the adapter is still being
* recovered or return a failure if the recovery failed. In the event that the
* adapter reset failed, simply return the failure as the ioctl would be unable
* to continue.
*
* Note that the above puts a requirement on this routine to only be called on
* an ioctl thread.
*
* Return: 0 on success, -errno on failure
*/
static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct glun_info *gli = lli->parent;
u8 *cmd_buf = NULL;
u8 *scsi_cmd = NULL;
u8 *sense_buf = NULL;
int rc = 0;
int result = 0;
int retry_cnt = 0;
u32 to = CMD_TIMEOUT * HZ;
retry:
cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
sense_buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
if (unlikely(!cmd_buf || !scsi_cmd || !sense_buf)) {
rc = -ENOMEM;
goto out;
}
scsi_cmd[0] = SERVICE_ACTION_IN_16; /* read cap(16) */
scsi_cmd[1] = SAI_READ_CAPACITY_16; /* service action */
put_unaligned_be32(CMD_BUFSIZE, &scsi_cmd[10]);
dev_dbg(dev, "%s: %ssending cmd(0x%x)\n", __func__,
retry_cnt ? "re" : "", scsi_cmd[0]);
/* Drop the ioctl read semahpore across lengthy call */
up_read(&cfg->ioctl_rwsem);
result = scsi_execute(sdev, scsi_cmd, DMA_FROM_DEVICE, cmd_buf,
CMD_BUFSIZE, sense_buf, to, CMD_RETRIES, 0, NULL);
down_read(&cfg->ioctl_rwsem);
rc = check_state(cfg);
if (rc) {
dev_err(dev, "%s: Failed state! result=0x08%X\n",
__func__, result);
rc = -ENODEV;
goto out;
}
if (driver_byte(result) == DRIVER_SENSE) {
result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */
if (result & SAM_STAT_CHECK_CONDITION) {
struct scsi_sense_hdr sshdr;
scsi_normalize_sense(sense_buf, SCSI_SENSE_BUFFERSIZE,
&sshdr);
switch (sshdr.sense_key) {
case NO_SENSE:
case RECOVERED_ERROR:
/* fall through */
case NOT_READY:
result &= ~SAM_STAT_CHECK_CONDITION;
break;
case UNIT_ATTENTION:
switch (sshdr.asc) {
case 0x29: /* Power on Reset or Device Reset */
/* fall through */
case 0x2A: /* Device capacity changed */
case 0x3F: /* Report LUNs changed */
/* Retry the command once more */
if (retry_cnt++ < 1) {
kfree(cmd_buf);
kfree(scsi_cmd);
kfree(sense_buf);
goto retry;
}
}
break;
default:
break;
}
}
}
if (result) {
dev_err(dev, "%s: command failed, result=0x%x\n",
__func__, result);
rc = -EIO;
goto out;
}
/*
* Read cap was successful, grab values from the buffer;
* note that we don't need to worry about unaligned access
* as the buffer is allocated on an aligned boundary.
*/
mutex_lock(&gli->mutex);
gli->max_lba = be64_to_cpu(*((__be64 *)&cmd_buf[0]));
gli->blk_len = be32_to_cpu(*((__be32 *)&cmd_buf[8]));
mutex_unlock(&gli->mutex);
out:
kfree(cmd_buf);
kfree(scsi_cmd);
kfree(sense_buf);
dev_dbg(dev, "%s: maxlba=%lld blklen=%d rc=%d\n",
__func__, gli->max_lba, gli->blk_len, rc);
return rc;
}
/**
* get_rhte() - obtains validated resource handle table entry reference
* @ctxi: Context owning the resource handle.
* @rhndl: Resource handle associated with entry.
* @lli: LUN associated with request.
*
* Return: Validated RHTE on success, NULL on failure
*/
struct sisl_rht_entry *get_rhte(struct ctx_info *ctxi, res_hndl_t rhndl,
struct llun_info *lli)
{
struct sisl_rht_entry *rhte = NULL;
if (unlikely(!ctxi->rht_start)) {
pr_debug("%s: Context does not have allocated RHT!\n",
__func__);
goto out;
}
if (unlikely(rhndl >= MAX_RHT_PER_CONTEXT)) {
pr_debug("%s: Bad resource handle! (%d)\n", __func__, rhndl);
goto out;
}
if (unlikely(ctxi->rht_lun[rhndl] != lli)) {
pr_debug("%s: Bad resource handle LUN! (%d)\n",
__func__, rhndl);
goto out;
}
rhte = &ctxi->rht_start[rhndl];
if (unlikely(rhte->nmask == 0)) {
pr_debug("%s: Unopened resource handle! (%d)\n",
__func__, rhndl);
rhte = NULL;
goto out;
}
out:
return rhte;
}
/**
* rhte_checkout() - obtains free/empty resource handle table entry
* @ctxi: Context owning the resource handle.
* @lli: LUN associated with request.
*
* Return: Free RHTE on success, NULL on failure
*/
struct sisl_rht_entry *rhte_checkout(struct ctx_info *ctxi,
struct llun_info *lli)
{
struct sisl_rht_entry *rhte = NULL;
int i;
/* Find a free RHT entry */
for (i = 0; i < MAX_RHT_PER_CONTEXT; i++)
if (ctxi->rht_start[i].nmask == 0) {
rhte = &ctxi->rht_start[i];
ctxi->rht_out++;
break;
}
if (likely(rhte))
ctxi->rht_lun[i] = lli;
pr_debug("%s: returning rhte=%p (%d)\n", __func__, rhte, i);
return rhte;
}
/**
* rhte_checkin() - releases a resource handle table entry
* @ctxi: Context owning the resource handle.
* @rhte: RHTE to release.
*/
void rhte_checkin(struct ctx_info *ctxi,
struct sisl_rht_entry *rhte)
{
u32 rsrc_handle = rhte - ctxi->rht_start;
rhte->nmask = 0;
rhte->fp = 0;
ctxi->rht_out--;
ctxi->rht_lun[rsrc_handle] = NULL;
ctxi->rht_needs_ws[rsrc_handle] = false;
}
/**
* rhte_format1() - populates a RHTE for format 1
* @rhte: RHTE to populate.
* @lun_id: LUN ID of LUN associated with RHTE.
* @perm: Desired permissions for RHTE.
* @port_sel: Port selection mask
*/
static void rht_format1(struct sisl_rht_entry *rhte, u64 lun_id, u32 perm,
u32 port_sel)
{
/*
* Populate the Format 1 RHT entry for direct access (physical
* LUN) using the synchronization sequence defined in the
* SISLite specification.
*/
struct sisl_rht_entry_f1 dummy = { 0 };
struct sisl_rht_entry_f1 *rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
memset(rhte_f1, 0, sizeof(*rhte_f1));
rhte_f1->fp = SISL_RHT_FP(1U, 0);
dma_wmb(); /* Make setting of format bit visible */
rhte_f1->lun_id = lun_id;
dma_wmb(); /* Make setting of LUN id visible */
/*
* Use a dummy RHT Format 1 entry to build the second dword
* of the entry that must be populated in a single write when
* enabled (valid bit set to TRUE).
*/
dummy.valid = 0x80;
dummy.fp = SISL_RHT_FP(1U, perm);
dummy.port_sel = port_sel;
rhte_f1->dw = dummy.dw;
dma_wmb(); /* Make remaining RHT entry fields visible */
}
/**
* cxlflash_lun_attach() - attaches a user to a LUN and manages the LUN's mode
* @gli: LUN to attach.
* @mode: Desired mode of the LUN.
* @locked: Mutex status on current thread.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_lun_attach(struct glun_info *gli, enum lun_mode mode, bool locked)
{
int rc = 0;
if (!locked)
mutex_lock(&gli->mutex);
if (gli->mode == MODE_NONE)
gli->mode = mode;
else if (gli->mode != mode) {
pr_debug("%s: LUN operating in mode %d, requested mode %d\n",
__func__, gli->mode, mode);
rc = -EINVAL;
goto out;
}
gli->users++;
WARN_ON(gli->users <= 0);
out:
pr_debug("%s: Returning rc=%d gli->mode=%u gli->users=%u\n",
__func__, rc, gli->mode, gli->users);
if (!locked)
mutex_unlock(&gli->mutex);
return rc;
}
/**
* cxlflash_lun_detach() - detaches a user from a LUN and resets the LUN's mode
* @gli: LUN to detach.
*
* When resetting the mode, terminate block allocation resources as they
* are no longer required (service is safe to call even when block allocation
* resources were not present - such as when transitioning from physical mode).
* These resources will be reallocated when needed (subsequent transition to
* virtual mode).
*/
void cxlflash_lun_detach(struct glun_info *gli)
{
mutex_lock(&gli->mutex);
WARN_ON(gli->mode == MODE_NONE);
if (--gli->users == 0) {
gli->mode = MODE_NONE;
cxlflash_ba_terminate(&gli->blka.ba_lun);
}
pr_debug("%s: gli->users=%u\n", __func__, gli->users);
WARN_ON(gli->users < 0);
mutex_unlock(&gli->mutex);
}
/**
* _cxlflash_disk_release() - releases the specified resource entry
* @sdev: SCSI device associated with LUN.
* @ctxi: Context owning resources.
* @release: Release ioctl data structure.
*
* For LUNs in virtual mode, the virtual LUN associated with the specified
* resource handle is resized to 0 prior to releasing the RHTE. Note that the
* AFU sync should _not_ be performed when the context is sitting on the error
* recovery list. A context on the error recovery list is not known to the AFU
* due to reset. When the context is recovered, it will be reattached and made
* known again to the AFU.
*
* Return: 0 on success, -errno on failure
*/
int _cxlflash_disk_release(struct scsi_device *sdev,
struct ctx_info *ctxi,
struct dk_cxlflash_release *release)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct afu *afu = cfg->afu;
bool put_ctx = false;
struct dk_cxlflash_resize size;
res_hndl_t rhndl = release->rsrc_handle;
int rc = 0;
u64 ctxid = DECODE_CTXID(release->context_id),
rctxid = release->context_id;
struct sisl_rht_entry *rhte;
struct sisl_rht_entry_f1 *rhte_f1;
dev_dbg(dev, "%s: ctxid=%llu rhndl=0x%llx gli->mode=%u gli->users=%u\n",
__func__, ctxid, release->rsrc_handle, gli->mode, gli->users);
if (!ctxi) {
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n",
__func__, ctxid);
rc = -EINVAL;
goto out;
}
put_ctx = true;
}
rhte = get_rhte(ctxi, rhndl, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: Bad resource handle! (%d)\n",
__func__, rhndl);
rc = -EINVAL;
goto out;
}
/*
* Resize to 0 for virtual LUNS by setting the size
* to 0. This will clear LXT_START and LXT_CNT fields
* in the RHT entry and properly sync with the AFU.
*
* Afterwards we clear the remaining fields.
*/
switch (gli->mode) {
case MODE_VIRTUAL:
marshal_rele_to_resize(release, &size);
size.req_size = 0;
rc = _cxlflash_vlun_resize(sdev, ctxi, &size);
if (rc) {
dev_dbg(dev, "%s: resize failed rc %d\n", __func__, rc);
goto out;
}
break;
case MODE_PHYSICAL:
/*
* Clear the Format 1 RHT entry for direct access
* (physical LUN) using the synchronization sequence
* defined in the SISLite specification.
*/
rhte_f1 = (struct sisl_rht_entry_f1 *)rhte;
rhte_f1->valid = 0;
dma_wmb(); /* Make revocation of RHT entry visible */
rhte_f1->lun_id = 0;
dma_wmb(); /* Make clearing of LUN id visible */
rhte_f1->dw = 0;
dma_wmb(); /* Make RHT entry bottom-half clearing visible */
if (!ctxi->err_recovery_active)
cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC);
break;
default:
WARN(1, "Unsupported LUN mode!");
goto out;
}
rhte_checkin(ctxi, rhte);
cxlflash_lun_detach(gli);
out:
if (put_ctx)
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
int cxlflash_disk_release(struct scsi_device *sdev,
struct dk_cxlflash_release *release)
{
return _cxlflash_disk_release(sdev, NULL, release);
}
/**
* destroy_context() - releases a context
* @cfg: Internal structure associated with the host.
* @ctxi: Context to release.
*
* This routine is safe to be called with a a non-initialized context
* and is tolerant of being called with the context's mutex held (it
* will be unlocked if necessary before freeing). Also note that the
* routine conditionally checks for the existence of the context control
* map before clearing the RHT registers and context capabilities because
* it is possible to destroy a context while the context is in the error
* state (previous mapping was removed [so there is no need to worry about
* clearing] and context is waiting for a new mapping).
*/
static void destroy_context(struct cxlflash_cfg *cfg,
struct ctx_info *ctxi)
{
struct afu *afu = cfg->afu;
if (ctxi->initialized) {
WARN_ON(!list_empty(&ctxi->luns));
/* Clear RHT registers and drop all capabilities for context */
if (afu->afu_map && ctxi->ctrl_map) {
writeq_be(0, &ctxi->ctrl_map->rht_start);
writeq_be(0, &ctxi->ctrl_map->rht_cnt_id);
writeq_be(0, &ctxi->ctrl_map->ctx_cap);
}
if (mutex_is_locked(&ctxi->mutex))
mutex_unlock(&ctxi->mutex);
}
/* Free memory associated with context */
free_page((ulong)ctxi->rht_start);
kfree(ctxi->rht_needs_ws);
kfree(ctxi->rht_lun);
kfree(ctxi);
}
/**
* create_context() - allocates and initializes a context
* @cfg: Internal structure associated with the host.
*
* Return: Allocated context on success, NULL on failure
*/
static struct ctx_info *create_context(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct llun_info **lli = NULL;
u8 *ws = NULL;
struct sisl_rht_entry *rhte;
ctxi = kzalloc(sizeof(*ctxi), GFP_KERNEL);
lli = kzalloc((MAX_RHT_PER_CONTEXT * sizeof(*lli)), GFP_KERNEL);
ws = kzalloc((MAX_RHT_PER_CONTEXT * sizeof(*ws)), GFP_KERNEL);
if (unlikely(!ctxi || !lli || !ws)) {
dev_err(dev, "%s: Unable to allocate context!\n", __func__);
goto err;
}
rhte = (struct sisl_rht_entry *)get_zeroed_page(GFP_KERNEL);
if (unlikely(!rhte)) {
dev_err(dev, "%s: Unable to allocate RHT!\n", __func__);
goto err;
}
ctxi->rht_lun = lli;
ctxi->rht_needs_ws = ws;
ctxi->rht_start = rhte;
out:
return ctxi;
err:
kfree(ws);
kfree(lli);
kfree(ctxi);
ctxi = NULL;
goto out;
}
/**
* init_context() - initializes a previously allocated context
* @ctxi: Previously allocated context
* @cfg: Internal structure associated with the host.
* @ctx: Previously obtained CXL context reference.
* @ctxid: Previously obtained process element associated with CXL context.
* @adap_fd: Previously obtained adapter fd associated with CXL context.
* @file: Previously obtained file associated with CXL context.
* @perms: User-specified permissions.
*
* Upon return, the context is marked as initialized and the context's mutex
* is locked.
*/
static void init_context(struct ctx_info *ctxi, struct cxlflash_cfg *cfg,
struct cxl_context *ctx, int ctxid, int adap_fd,
struct file *file, u32 perms)
{
struct afu *afu = cfg->afu;
ctxi->rht_perms = perms;
ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
ctxi->lfd = adap_fd;
ctxi->pid = current->tgid; /* tgid = pid */
ctxi->ctx = ctx;
ctxi->file = file;
ctxi->initialized = true;
mutex_init(&ctxi->mutex);
INIT_LIST_HEAD(&ctxi->luns);
INIT_LIST_HEAD(&ctxi->list); /* initialize for list_empty() */
mutex_lock(&ctxi->mutex);
}
/**
* _cxlflash_disk_detach() - detaches a LUN from a context
* @sdev: SCSI device associated with LUN.
* @ctxi: Context owning resources.
* @detach: Detach ioctl data structure.
*
* As part of the detach, all per-context resources associated with the LUN
* are cleaned up. When detaching the last LUN for a context, the context
* itself is cleaned up and released.
*
* Return: 0 on success, -errno on failure
*/
static int _cxlflash_disk_detach(struct scsi_device *sdev,
struct ctx_info *ctxi,
struct dk_cxlflash_detach *detach)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct lun_access *lun_access, *t;
struct dk_cxlflash_release rel;
bool put_ctx = false;
int i;
int rc = 0;
int lfd;
u64 ctxid = DECODE_CTXID(detach->context_id),
rctxid = detach->context_id;
dev_dbg(dev, "%s: ctxid=%llu\n", __func__, ctxid);
if (!ctxi) {
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n",
__func__, ctxid);
rc = -EINVAL;
goto out;
}
put_ctx = true;
}
/* Cleanup outstanding resources tied to this LUN */
if (ctxi->rht_out) {
marshal_det_to_rele(detach, &rel);
for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) {
if (ctxi->rht_lun[i] == lli) {
rel.rsrc_handle = i;
_cxlflash_disk_release(sdev, ctxi, &rel);
}
/* No need to loop further if we're done */
if (ctxi->rht_out == 0)
break;
}
}
/* Take our LUN out of context, free the node */
list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
if (lun_access->lli == lli) {
list_del(&lun_access->list);
kfree(lun_access);
lun_access = NULL;
break;
}
/* Tear down context following last LUN cleanup */
if (list_empty(&ctxi->luns)) {
ctxi->unavail = true;
mutex_unlock(&ctxi->mutex);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
/* Might not have been in error list so conditionally remove */
if (!list_empty(&ctxi->list))
list_del(&ctxi->list);
cfg->ctx_tbl[ctxid] = NULL;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
mutex_unlock(&ctxi->mutex);
lfd = ctxi->lfd;
destroy_context(cfg, ctxi);
ctxi = NULL;
put_ctx = false;
/*
* As a last step, clean up external resources when not
* already on an external cleanup thread, i.e.: close(adap_fd).
*
* NOTE: this will free up the context from the CXL services,
* allowing it to dole out the same context_id on a future
* (or even currently in-flight) disk_attach operation.
*/
if (lfd != -1)
sys_close(lfd);
}
/* Release the sdev reference that bound this LUN to the context */
scsi_device_put(sdev);
out:
if (put_ctx)
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
}
static int cxlflash_disk_detach(struct scsi_device *sdev,
struct dk_cxlflash_detach *detach)
{
return _cxlflash_disk_detach(sdev, NULL, detach);
}
/**
* cxlflash_cxl_release() - release handler for adapter file descriptor
* @inode: File-system inode associated with fd.
* @file: File installed with adapter file descriptor.
*
* This routine is the release handler for the fops registered with
* the CXL services on an initial attach for a context. It is called
* when a close is performed on the adapter file descriptor returned
* to the user. Programmatically, the user is not required to perform
* the close, as it is handled internally via the detach ioctl when
* a context is being removed. Note that nothing prevents the user
* from performing a close, but the user should be aware that doing
* so is considered catastrophic and subsequent usage of the superpipe
* API with previously saved off tokens will fail.
*
* When initiated from an external close (either by the user or via
* a process tear down), the routine derives the context reference
* and calls detach for each LUN associated with the context. The
* final detach operation will cause the context itself to be freed.
* Note that the saved off lfd is reset prior to calling detach to
* signify that the final detach should not perform a close.
*
* When initiated from a detach operation as part of the tear down
* of a context, the context is first completely freed and then the
* close is performed. This routine will fail to derive the context
* reference (due to the context having already been freed) and then
* call into the CXL release entry point.
*
* Thus, with exception to when the CXL process element (context id)
* lookup fails (a case that should theoretically never occur), every
* call into this routine results in a complete freeing of a context.
*
* As part of the detach, all per-context resources associated with the LUN
* are cleaned up. When detaching the last LUN for a context, the context
* itself is cleaned up and released.
*
* Return: 0 on success
*/
static int cxlflash_cxl_release(struct inode *inode, struct file *file)
{
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct dk_cxlflash_detach detach = { { 0 }, 0 };
struct lun_access *lun_access, *t;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int ctxid;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
goto out;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
ctxi = get_context(cfg, ctxid, file, ctrl | CTX_CTRL_CLONE);
if (!ctxi) {
dev_dbg(dev, "%s: Context %d already free!\n",
__func__, ctxid);
goto out_release;
}
dev_dbg(dev, "%s: Another process owns context %d!\n",
__func__, ctxid);
put_context(ctxi);
goto out;
}
dev_dbg(dev, "%s: close(%d) for context %d\n",
__func__, ctxi->lfd, ctxid);
/* Reset the file descriptor to indicate we're on a close() thread */
ctxi->lfd = -1;
detach.context_id = ctxi->ctxid;
list_for_each_entry_safe(lun_access, t, &ctxi->luns, list)
_cxlflash_disk_detach(lun_access->sdev, ctxi, &detach);
out_release:
cxl_fd_release(inode, file);
out:
dev_dbg(dev, "%s: returning\n", __func__);
return 0;
}
/**
* unmap_context() - clears a previously established mapping
* @ctxi: Context owning the mapping.
*
* This routine is used to switch between the error notification page
* (dummy page of all 1's) and the real mapping (established by the CXL
* fault handler).
*/
static void unmap_context(struct ctx_info *ctxi)
{
unmap_mapping_range(ctxi->file->f_mapping, 0, 0, 1);
}
/**
* get_err_page() - obtains and allocates the error notification page
*
* Return: error notification page on success, NULL on failure
*/
static struct page *get_err_page(void)
{
struct page *err_page = global.err_page;
if (unlikely(!err_page)) {
err_page = alloc_page(GFP_KERNEL);
if (unlikely(!err_page)) {
pr_err("%s: Unable to allocate err_page!\n", __func__);
goto out;
}
memset(page_address(err_page), -1, PAGE_SIZE);
/* Serialize update w/ other threads to avoid a leak */
mutex_lock(&global.mutex);
if (likely(!global.err_page))
global.err_page = err_page;
else {
__free_page(err_page);
err_page = global.err_page;
}
mutex_unlock(&global.mutex);
}
out:
pr_debug("%s: returning err_page=%p\n", __func__, err_page);
return err_page;
}
/**
* cxlflash_mmap_fault() - mmap fault handler for adapter file descriptor
* @vma: VM area associated with mapping.
* @vmf: VM fault associated with current fault.
*
* To support error notification via MMIO, faults are 'caught' by this routine
* that was inserted before passing back the adapter file descriptor on attach.
* When a fault occurs, this routine evaluates if error recovery is active and
* if so, installs the error page to 'notify' the user about the error state.
* During normal operation, the fault is simply handled by the original fault
* handler that was installed by CXL services as part of initializing the
* adapter file descriptor. The VMA's page protection bits are toggled to
* indicate cached/not-cached depending on the memory backing the fault.
*
* Return: 0 on success, VM_FAULT_SIGBUS on failure
*/
static int cxlflash_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct file *file = vma->vm_file;
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
struct page *err_page = NULL;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int rc = 0;
int ctxid;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
goto err;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%d)\n", __func__, ctxid);
goto err;
}
dev_dbg(dev, "%s: fault(%d) for context %d\n",
__func__, ctxi->lfd, ctxid);
if (likely(!ctxi->err_recovery_active)) {
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
rc = ctxi->cxl_mmap_vmops->fault(vma, vmf);
} else {
dev_dbg(dev, "%s: err recovery active, use err_page!\n",
__func__);
err_page = get_err_page();
if (unlikely(!err_page)) {
dev_err(dev, "%s: Could not obtain error page!\n",
__func__);
rc = VM_FAULT_RETRY;
goto out;
}
get_page(err_page);
vmf->page = err_page;
vma->vm_page_prot = pgprot_cached(vma->vm_page_prot);
}
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc);
return rc;
err:
rc = VM_FAULT_SIGBUS;
goto out;
}
/*
* Local MMAP vmops to 'catch' faults
*/
static const struct vm_operations_struct cxlflash_mmap_vmops = {
.fault = cxlflash_mmap_fault,
};
/**
* cxlflash_cxl_mmap() - mmap handler for adapter file descriptor
* @file: File installed with adapter file descriptor.
* @vma: VM area associated with mapping.
*
* Installs local mmap vmops to 'catch' faults for error notification support.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_cxl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct cxl_context *ctx = cxl_fops_get_context(file);
struct cxlflash_cfg *cfg = container_of(file->f_op, struct cxlflash_cfg,
cxl_fops);
struct device *dev = &cfg->dev->dev;
struct ctx_info *ctxi = NULL;
enum ctx_ctrl ctrl = CTX_CTRL_ERR_FALLBACK | CTX_CTRL_FILE;
int ctxid;
int rc = 0;
ctxid = cxl_process_element(ctx);
if (unlikely(ctxid < 0)) {
dev_err(dev, "%s: Context %p was closed! (%d)\n",
__func__, ctx, ctxid);
rc = -EIO;
goto out;
}
ctxi = get_context(cfg, ctxid, file, ctrl);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%d)\n", __func__, ctxid);
rc = -EIO;
goto out;
}
dev_dbg(dev, "%s: mmap(%d) for context %d\n",
__func__, ctxi->lfd, ctxid);
rc = cxl_fd_mmap(file, vma);
if (likely(!rc)) {
/* Insert ourself in the mmap fault handler path */
ctxi->cxl_mmap_vmops = vma->vm_ops;
vma->vm_ops = &cxlflash_mmap_vmops;
}
out:
if (likely(ctxi))
put_context(ctxi);
return rc;
}
const struct file_operations cxlflash_cxl_fops = {
.owner = THIS_MODULE,
.mmap = cxlflash_cxl_mmap,
.release = cxlflash_cxl_release,
};
/**
* cxlflash_mark_contexts_error() - move contexts to error state and list
* @cfg: Internal structure associated with the host.
*
* A context is only moved over to the error list when there are no outstanding
* references to it. This ensures that a running operation has completed.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_mark_contexts_error(struct cxlflash_cfg *cfg)
{
int i, rc = 0;
struct ctx_info *ctxi = NULL;
mutex_lock(&cfg->ctx_tbl_list_mutex);
for (i = 0; i < MAX_CONTEXT; i++) {
ctxi = cfg->ctx_tbl[i];
if (ctxi) {
mutex_lock(&ctxi->mutex);
cfg->ctx_tbl[i] = NULL;
list_add(&ctxi->list, &cfg->ctx_err_recovery);
ctxi->err_recovery_active = true;
ctxi->ctrl_map = NULL;
unmap_context(ctxi);
mutex_unlock(&ctxi->mutex);
}
}
mutex_unlock(&cfg->ctx_tbl_list_mutex);
return rc;
}
/*
* Dummy NULL fops
*/
static const struct file_operations null_fops = {
.owner = THIS_MODULE,
};
/**
* check_state() - checks and responds to the current adapter state
* @cfg: Internal structure associated with the host.
*
* This routine can block and should only be used on process context.
* It assumes that the caller is an ioctl thread and holding the ioctl
* read semaphore. This is temporarily let up across the wait to allow
* for draining actively running ioctls. Also note that when waking up
* from waiting in reset, the state is unknown and must be checked again
* before proceeding.
*
* Return: 0 on success, -errno on failure
*/
int check_state(struct cxlflash_cfg *cfg)
{
struct device *dev = &cfg->dev->dev;
int rc = 0;
retry:
switch (cfg->state) {
case STATE_RESET:
dev_dbg(dev, "%s: Reset state, going to wait...\n", __func__);
up_read(&cfg->ioctl_rwsem);
rc = wait_event_interruptible(cfg->reset_waitq,
cfg->state != STATE_RESET);
down_read(&cfg->ioctl_rwsem);
if (unlikely(rc))
break;
goto retry;
case STATE_FAILTERM:
dev_dbg(dev, "%s: Failed/Terminating!\n", __func__);
rc = -ENODEV;
break;
default:
break;
}
return rc;
}
/**
* cxlflash_disk_attach() - attach a LUN to a context
* @sdev: SCSI device associated with LUN.
* @attach: Attach ioctl data structure.
*
* Creates a context and attaches LUN to it. A LUN can only be attached
* one time to a context (subsequent attaches for the same context/LUN pair
* are not supported). Additional LUNs can be attached to a context by
* specifying the 'reuse' flag defined in the cxlflash_ioctl.h header.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_attach(struct scsi_device *sdev,
struct dk_cxlflash_attach *attach)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct cxl_ioctl_start_work *work;
struct ctx_info *ctxi = NULL;
struct lun_access *lun_access = NULL;
int rc = 0;
u32 perms;
int ctxid = -1;
u64 rctxid = 0UL;
struct file *file = NULL;
struct cxl_context *ctx = NULL;
int fd = -1;
if (attach->num_interrupts > 4) {
dev_dbg(dev, "%s: Cannot support this many interrupts %llu\n",
__func__, attach->num_interrupts);
rc = -EINVAL;
goto out;
}
if (gli->max_lba == 0) {
dev_dbg(dev, "%s: No capacity info for this LUN (%016llX)\n",
__func__, lli->lun_id[sdev->channel]);
rc = read_cap16(sdev, lli);
if (rc) {
dev_err(dev, "%s: Invalid device! (%d)\n",
__func__, rc);
rc = -ENODEV;
goto out;
}
dev_dbg(dev, "%s: LBA = %016llX\n", __func__, gli->max_lba);
dev_dbg(dev, "%s: BLK_LEN = %08X\n", __func__, gli->blk_len);
}
if (attach->hdr.flags & DK_CXLFLASH_ATTACH_REUSE_CONTEXT) {
rctxid = attach->context_id;
ctxi = get_context(cfg, rctxid, NULL, 0);
if (!ctxi) {
dev_dbg(dev, "%s: Bad context! (%016llX)\n",
__func__, rctxid);
rc = -EINVAL;
goto out;
}
list_for_each_entry(lun_access, &ctxi->luns, list)
if (lun_access->lli == lli) {
dev_dbg(dev, "%s: Already attached!\n",
__func__);
rc = -EINVAL;
goto out;
}
}
rc = scsi_device_get(sdev);
if (unlikely(rc)) {
dev_err(dev, "%s: Unable to get sdev reference!\n", __func__);
goto out;
}
lun_access = kzalloc(sizeof(*lun_access), GFP_KERNEL);
if (unlikely(!lun_access)) {
dev_err(dev, "%s: Unable to allocate lun_access!\n", __func__);
rc = -ENOMEM;
goto err;
}
lun_access->lli = lli;
lun_access->sdev = sdev;
/* Non-NULL context indicates reuse */
if (ctxi) {
dev_dbg(dev, "%s: Reusing context for LUN! (%016llX)\n",
__func__, rctxid);
list_add(&lun_access->list, &ctxi->luns);
fd = ctxi->lfd;
goto out_attach;
}
ctxi = create_context(cfg);
if (unlikely(!ctxi)) {
dev_err(dev, "%s: Failed to create context! (%d)\n",
__func__, ctxid);
goto err;
}
ctx = cxl_dev_context_init(cfg->dev);
if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
goto err;
}
work = &ctxi->work;
work->num_interrupts = attach->num_interrupts;
work->flags = CXL_START_WORK_NUM_IRQS;
rc = cxl_start_work(ctx, work);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Could not start context rc=%d\n",
__func__, rc);
goto err;
}
ctxid = cxl_process_element(ctx);
if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err;
}
file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
if (unlikely(fd < 0)) {
rc = -ENODEV;
dev_err(dev, "%s: Could not get file descriptor\n", __func__);
goto err;
}
/* Translate read/write O_* flags from fcntl.h to AFU permission bits */
perms = SISL_RHT_PERM(attach->hdr.flags + 1);
/* Context mutex is locked upon return */
init_context(ctxi, cfg, ctx, ctxid, fd, file, perms);
rc = afu_attach(cfg, ctxi);
if (unlikely(rc)) {
dev_err(dev, "%s: Could not attach AFU rc %d\n", __func__, rc);
goto err;
}
/*
* No error paths after this point. Once the fd is installed it's
* visible to user space and can't be undone safely on this thread.
* There is no need to worry about a deadlock here because no one
* knows about us yet; we can be the only one holding our mutex.
*/
list_add(&lun_access->list, &ctxi->luns);
mutex_unlock(&ctxi->mutex);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
cfg->ctx_tbl[ctxid] = ctxi;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
fd_install(fd, file);
out_attach:
attach->hdr.return_flags = 0;
attach->context_id = ctxi->ctxid;
attach->block_size = gli->blk_len;
attach->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
attach->last_lba = gli->max_lba;
attach->max_xfer = sdev->host->max_sectors * MAX_SECTOR_UNIT;
attach->max_xfer /= gli->blk_len;
out:
attach->adap_fd = fd;
if (ctxi)
put_context(ctxi);
dev_dbg(dev, "%s: returning ctxid=%d fd=%d bs=%lld rc=%d llba=%lld\n",
__func__, ctxid, fd, attach->block_size, rc, attach->last_lba);
return rc;
err:
/* Cleanup CXL context; okay to 'stop' even if it was not started */
if (!IS_ERR_OR_NULL(ctx)) {
cxl_stop_context(ctx);
cxl_release_context(ctx);
ctx = NULL;
}
/*
* Here, we're overriding the fops with a dummy all-NULL fops because
* fput() calls the release fop, which will cause us to mistakenly
* call into the CXL code. Rather than try to add yet more complexity
* to that routine (cxlflash_cxl_release) we should try to fix the
* issue here.
*/
if (fd > 0) {
file->f_op = &null_fops;
fput(file);
put_unused_fd(fd);
fd = -1;
file = NULL;
}
/* Cleanup our context; safe to call even with mutex locked */
if (ctxi) {
destroy_context(cfg, ctxi);
ctxi = NULL;
}
kfree(lun_access);
scsi_device_put(sdev);
goto out;
}
/**
* recover_context() - recovers a context in error
* @cfg: Internal structure associated with the host.
* @ctxi: Context to release.
*
* Restablishes the state for a context-in-error.
*
* Return: 0 on success, -errno on failure
*/
static int recover_context(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
{
struct device *dev = &cfg->dev->dev;
int rc = 0;
int old_fd, fd = -1;
int ctxid = -1;
struct file *file;
struct cxl_context *ctx;
struct afu *afu = cfg->afu;
ctx = cxl_dev_context_init(cfg->dev);
if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
goto out;
}
rc = cxl_start_work(ctx, &ctxi->work);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Could not start context rc=%d\n",
__func__, rc);
goto err1;
}
ctxid = cxl_process_element(ctx);
if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err2;
}
file = cxl_get_fd(ctx, &cfg->cxl_fops, &fd);
if (unlikely(fd < 0)) {
rc = -ENODEV;
dev_err(dev, "%s: Could not get file descriptor\n", __func__);
goto err2;
}
/* Update with new MMIO area based on updated context id */
ctxi->ctrl_map = &afu->afu_map->ctrls[ctxid].ctrl;
rc = afu_attach(cfg, ctxi);
if (rc) {
dev_err(dev, "%s: Could not attach AFU rc %d\n", __func__, rc);
goto err3;
}
/*
* No error paths after this point. Once the fd is installed it's
* visible to user space and can't be undone safely on this thread.
*/
old_fd = ctxi->lfd;
ctxi->ctxid = ENCODE_CTXID(ctxi, ctxid);
ctxi->lfd = fd;
ctxi->ctx = ctx;
ctxi->file = file;
/*
* Put context back in table (note the reinit of the context list);
* we must first drop the context's mutex and then acquire it in
* order with the table/list mutex to avoid a deadlock - safe to do
* here because no one can find us at this moment in time.
*/
mutex_unlock(&ctxi->mutex);
mutex_lock(&cfg->ctx_tbl_list_mutex);
mutex_lock(&ctxi->mutex);
list_del_init(&ctxi->list);
cfg->ctx_tbl[ctxid] = ctxi;
mutex_unlock(&cfg->ctx_tbl_list_mutex);
fd_install(fd, file);
/* Release the original adapter fd and associated CXL resources */
sys_close(old_fd);
out:
dev_dbg(dev, "%s: returning ctxid=%d fd=%d rc=%d\n",
__func__, ctxid, fd, rc);
return rc;
err3:
fput(file);
put_unused_fd(fd);
err2:
cxl_stop_context(ctx);
err1:
cxl_release_context(ctx);
goto out;
}
/**
* cxlflash_afu_recover() - initiates AFU recovery
* @sdev: SCSI device associated with LUN.
* @recover: Recover ioctl data structure.
*
* Only a single recovery is allowed at a time to avoid exhausting CXL
* resources (leading to recovery failure) in the event that we're up
* against the maximum number of contexts limit. For similar reasons,
* a context recovery is retried if there are multiple recoveries taking
* place at the same time and the failure was due to CXL services being
* unable to keep up.
*
* As this routine is called on ioctl context, it holds the ioctl r/w
* semaphore that is used to drain ioctls in recovery scenarios. The
* implementation to achieve the pacing described above (a local mutex)
* requires that the ioctl r/w semaphore be dropped and reacquired to
* avoid a 3-way deadlock when multiple process recoveries operate in
* parallel.
*
* Because a user can detect an error condition before the kernel, it is
* quite possible for this routine to act as the kernel's EEH detection
* source (MMIO read of mbox_r). Because of this, there is a window of
* time where an EEH might have been detected but not yet 'serviced'
* (callback invoked, causing the device to enter reset state). To avoid
* looping in this routine during that window, a 1 second sleep is in place
* between the time the MMIO failure is detected and the time a wait on the
* reset wait queue is attempted via check_state().
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_afu_recover(struct scsi_device *sdev,
struct dk_cxlflash_recover_afu *recover)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct afu *afu = cfg->afu;
struct ctx_info *ctxi = NULL;
struct mutex *mutex = &cfg->ctx_recovery_mutex;
u64 ctxid = DECODE_CTXID(recover->context_id),
rctxid = recover->context_id;
long reg;
int lretry = 20; /* up to 2 seconds */
int rc = 0;
atomic_inc(&cfg->recovery_threads);
up_read(&cfg->ioctl_rwsem);
rc = mutex_lock_interruptible(mutex);
down_read(&cfg->ioctl_rwsem);
if (rc)
goto out;
rc = check_state(cfg);
if (rc) {
dev_err(dev, "%s: Failed state! rc=%d\n", __func__, rc);
rc = -ENODEV;
goto out;
}
dev_dbg(dev, "%s: reason 0x%016llX rctxid=%016llX\n",
__func__, recover->reason, rctxid);
retry:
/* Ensure that this process is attached to the context */
ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto out;
}
if (ctxi->err_recovery_active) {
retry_recover:
rc = recover_context(cfg, ctxi);
if (unlikely(rc)) {
dev_err(dev, "%s: Recovery failed for context %llu (rc=%d)\n",
__func__, ctxid, rc);
if ((rc == -ENODEV) &&
((atomic_read(&cfg->recovery_threads) > 1) ||
(lretry--))) {
dev_dbg(dev, "%s: Going to try again!\n",
__func__);
mutex_unlock(mutex);
msleep(100);
rc = mutex_lock_interruptible(mutex);
if (rc)
goto out;
goto retry_recover;
}
goto out;
}
ctxi->err_recovery_active = false;
recover->context_id = ctxi->ctxid;
recover->adap_fd = ctxi->lfd;
recover->mmio_size = sizeof(afu->afu_map->hosts[0].harea);
recover->hdr.return_flags |=
DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET;
goto out;
}
/* Test if in error state */
reg = readq_be(&afu->ctrl_map->mbox_r);
if (reg == -1) {
dev_dbg(dev, "%s: MMIO fail, wait for recovery.\n", __func__);
/*
* Before checking the state, put back the context obtained with
* get_context() as it is no longer needed and sleep for a short
* period of time (see prolog notes).
*/
put_context(ctxi);
ctxi = NULL;
ssleep(1);
rc = check_state(cfg);
if (unlikely(rc))
goto out;
goto retry;
}
dev_dbg(dev, "%s: MMIO working, no recovery required!\n", __func__);
out:
if (likely(ctxi))
put_context(ctxi);
mutex_unlock(mutex);
atomic_dec_if_positive(&cfg->recovery_threads);
return rc;
}
/**
* process_sense() - evaluates and processes sense data
* @sdev: SCSI device associated with LUN.
* @verify: Verify ioctl data structure.
*
* Return: 0 on success, -errno on failure
*/
static int process_sense(struct scsi_device *sdev,
struct dk_cxlflash_verify *verify)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
u64 prev_lba = gli->max_lba;
struct scsi_sense_hdr sshdr = { 0 };
int rc = 0;
rc = scsi_normalize_sense((const u8 *)&verify->sense_data,
DK_CXLFLASH_VERIFY_SENSE_LEN, &sshdr);
if (!rc) {
dev_err(dev, "%s: Failed to normalize sense data!\n", __func__);
rc = -EINVAL;
goto out;
}
switch (sshdr.sense_key) {
case NO_SENSE:
case RECOVERED_ERROR:
/* fall through */
case NOT_READY:
break;
case UNIT_ATTENTION:
switch (sshdr.asc) {
case 0x29: /* Power on Reset or Device Reset */
/* fall through */
case 0x2A: /* Device settings/capacity changed */
rc = read_cap16(sdev, lli);
if (rc) {
rc = -ENODEV;
break;
}
if (prev_lba != gli->max_lba)
dev_dbg(dev, "%s: Capacity changed old=%lld "
"new=%lld\n", __func__, prev_lba,
gli->max_lba);
break;
case 0x3F: /* Report LUNs changed, Rescan. */
scsi_scan_host(cfg->host);
break;
default:
rc = -EIO;
break;
}
break;
default:
rc = -EIO;
break;
}
out:
dev_dbg(dev, "%s: sense_key %x asc %x ascq %x rc %d\n", __func__,
sshdr.sense_key, sshdr.asc, sshdr.ascq, rc);
return rc;
}
/**
* cxlflash_disk_verify() - verifies a LUN is the same and handle size changes
* @sdev: SCSI device associated with LUN.
* @verify: Verify ioctl data structure.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_verify(struct scsi_device *sdev,
struct dk_cxlflash_verify *verify)
{
int rc = 0;
struct ctx_info *ctxi = NULL;
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct sisl_rht_entry *rhte = NULL;
res_hndl_t rhndl = verify->rsrc_handle;
u64 ctxid = DECODE_CTXID(verify->context_id),
rctxid = verify->context_id;
u64 last_lba = 0;
dev_dbg(dev, "%s: ctxid=%llu rhndl=%016llX, hint=%016llX, "
"flags=%016llX\n", __func__, ctxid, verify->rsrc_handle,
verify->hint, verify->hdr.flags);
ctxi = get_context(cfg, rctxid, lli, 0);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto out;
}
rhte = get_rhte(ctxi, rhndl, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: Bad resource handle! (%d)\n",
__func__, rhndl);
rc = -EINVAL;
goto out;
}
/*
* Look at the hint/sense to see if it requires us to redrive
* inquiry (i.e. the Unit attention is due to the WWN changing).
*/
if (verify->hint & DK_CXLFLASH_VERIFY_HINT_SENSE) {
/* Can't hold mutex across process_sense/read_cap16,
* since we could have an intervening EEH event.
*/
ctxi->unavail = true;
mutex_unlock(&ctxi->mutex);
rc = process_sense(sdev, verify);
if (unlikely(rc)) {
dev_err(dev, "%s: Failed to validate sense data (%d)\n",
__func__, rc);
mutex_lock(&ctxi->mutex);
ctxi->unavail = false;
goto out;
}
mutex_lock(&ctxi->mutex);
ctxi->unavail = false;
}
switch (gli->mode) {
case MODE_PHYSICAL:
last_lba = gli->max_lba;
break;
case MODE_VIRTUAL:
/* Cast lxt_cnt to u64 for multiply to be treated as 64bit op */
last_lba = ((u64)rhte->lxt_cnt * MC_CHUNK_SIZE * gli->blk_len);
last_lba /= CXLFLASH_BLOCK_SIZE;
last_lba--;
break;
default:
WARN(1, "Unsupported LUN mode!");
}
verify->last_lba = last_lba;
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning rc=%d llba=%llX\n",
__func__, rc, verify->last_lba);
return rc;
}
/**
* decode_ioctl() - translates an encoded ioctl to an easily identifiable string
* @cmd: The ioctl command to decode.
*
* Return: A string identifying the decoded ioctl.
*/
static char *decode_ioctl(int cmd)
{
switch (cmd) {
case DK_CXLFLASH_ATTACH:
return __stringify_1(DK_CXLFLASH_ATTACH);
case DK_CXLFLASH_USER_DIRECT:
return __stringify_1(DK_CXLFLASH_USER_DIRECT);
case DK_CXLFLASH_USER_VIRTUAL:
return __stringify_1(DK_CXLFLASH_USER_VIRTUAL);
case DK_CXLFLASH_VLUN_RESIZE:
return __stringify_1(DK_CXLFLASH_VLUN_RESIZE);
case DK_CXLFLASH_RELEASE:
return __stringify_1(DK_CXLFLASH_RELEASE);
case DK_CXLFLASH_DETACH:
return __stringify_1(DK_CXLFLASH_DETACH);
case DK_CXLFLASH_VERIFY:
return __stringify_1(DK_CXLFLASH_VERIFY);
case DK_CXLFLASH_VLUN_CLONE:
return __stringify_1(DK_CXLFLASH_VLUN_CLONE);
case DK_CXLFLASH_RECOVER_AFU:
return __stringify_1(DK_CXLFLASH_RECOVER_AFU);
case DK_CXLFLASH_MANAGE_LUN:
return __stringify_1(DK_CXLFLASH_MANAGE_LUN);
}
return "UNKNOWN";
}
/**
* cxlflash_disk_direct_open() - opens a direct (physical) disk
* @sdev: SCSI device associated with LUN.
* @arg: UDirect ioctl data structure.
*
* On successful return, the user is informed of the resource handle
* to be used to identify the direct lun and the size (in blocks) of
* the direct lun in last LBA format.
*
* Return: 0 on success, -errno on failure
*/
static int cxlflash_disk_direct_open(struct scsi_device *sdev, void *arg)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct llun_info *lli = sdev->hostdata;
struct glun_info *gli = lli->parent;
struct dk_cxlflash_udirect *pphys = (struct dk_cxlflash_udirect *)arg;
u64 ctxid = DECODE_CTXID(pphys->context_id),
rctxid = pphys->context_id;
u64 lun_size = 0;
u64 last_lba = 0;
u64 rsrc_handle = -1;
u32 port = CHAN2PORT(sdev->channel);
int rc = 0;
struct ctx_info *ctxi = NULL;
struct sisl_rht_entry *rhte = NULL;
pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
rc = cxlflash_lun_attach(gli, MODE_PHYSICAL, false);
if (unlikely(rc)) {
dev_dbg(dev, "%s: Failed to attach to LUN! (PHYSICAL)\n",
__func__);
goto out;
}
ctxi = get_context(cfg, rctxid, lli, 0);
if (unlikely(!ctxi)) {
dev_dbg(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);
rc = -EINVAL;
goto err1;
}
rhte = rhte_checkout(ctxi, lli);
if (unlikely(!rhte)) {
dev_dbg(dev, "%s: too many opens for this context\n", __func__);
rc = -EMFILE; /* too many opens */
goto err1;
}
rsrc_handle = (rhte - ctxi->rht_start);
rht_format1(rhte, lli->lun_id[sdev->channel], ctxi->rht_perms, port);
cxlflash_afu_sync(afu, ctxid, rsrc_handle, AFU_LW_SYNC);
last_lba = gli->max_lba;
pphys->hdr.return_flags = 0;
pphys->last_lba = last_lba;
pphys->rsrc_handle = rsrc_handle;
out:
if (likely(ctxi))
put_context(ctxi);
dev_dbg(dev, "%s: returning handle 0x%llx rc=%d llba %lld\n",
__func__, rsrc_handle, rc, last_lba);
return rc;
err1:
cxlflash_lun_detach(gli);
goto out;
}
/**
* ioctl_common() - common IOCTL handler for driver
* @sdev: SCSI device associated with LUN.
* @cmd: IOCTL command.
*
* Handles common fencing operations that are valid for multiple ioctls. Always
* allow through ioctls that are cleanup oriented in nature, even when operating
* in a failed/terminating state.
*
* Return: 0 on success, -errno on failure
*/
static int ioctl_common(struct scsi_device *sdev, int cmd)
{
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct llun_info *lli = sdev->hostdata;
int rc = 0;
if (unlikely(!lli)) {
dev_dbg(dev, "%s: Unknown LUN\n", __func__);
rc = -EINVAL;
goto out;
}
rc = check_state(cfg);
if (unlikely(rc) && (cfg->state == STATE_FAILTERM)) {
switch (cmd) {
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_DETACH:
dev_dbg(dev, "%s: Command override! (%d)\n",
__func__, rc);
rc = 0;
break;
}
}
out:
return rc;
}
/**
* cxlflash_ioctl() - IOCTL handler for driver
* @sdev: SCSI device associated with LUN.
* @cmd: IOCTL command.
* @arg: Userspace ioctl data structure.
*
* A read/write semaphore is used to implement a 'drain' of currently
* running ioctls. The read semaphore is taken at the beginning of each
* ioctl thread and released upon concluding execution. Additionally the
* semaphore should be released and then reacquired in any ioctl execution
* path which will wait for an event to occur that is outside the scope of
* the ioctl (i.e. an adapter reset). To drain the ioctls currently running,
* a thread simply needs to acquire the write semaphore.
*
* Return: 0 on success, -errno on failure
*/
int cxlflash_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
typedef int (*sioctl) (struct scsi_device *, void *);
struct cxlflash_cfg *cfg = (struct cxlflash_cfg *)sdev->host->hostdata;
struct device *dev = &cfg->dev->dev;
struct afu *afu = cfg->afu;
struct dk_cxlflash_hdr *hdr;
char buf[sizeof(union cxlflash_ioctls)];
size_t size = 0;
bool known_ioctl = false;
int idx;
int rc = 0;
struct Scsi_Host *shost = sdev->host;
sioctl do_ioctl = NULL;
static const struct {
size_t size;
sioctl ioctl;
} ioctl_tbl[] = { /* NOTE: order matters here */
{sizeof(struct dk_cxlflash_attach), (sioctl)cxlflash_disk_attach},
{sizeof(struct dk_cxlflash_udirect), cxlflash_disk_direct_open},
{sizeof(struct dk_cxlflash_release), (sioctl)cxlflash_disk_release},
{sizeof(struct dk_cxlflash_detach), (sioctl)cxlflash_disk_detach},
{sizeof(struct dk_cxlflash_verify), (sioctl)cxlflash_disk_verify},
{sizeof(struct dk_cxlflash_recover_afu), (sioctl)cxlflash_afu_recover},
{sizeof(struct dk_cxlflash_manage_lun), (sioctl)cxlflash_manage_lun},
{sizeof(struct dk_cxlflash_uvirtual), cxlflash_disk_virtual_open},
{sizeof(struct dk_cxlflash_resize), (sioctl)cxlflash_vlun_resize},
{sizeof(struct dk_cxlflash_clone), (sioctl)cxlflash_disk_clone},
};
/* Hold read semaphore so we can drain if needed */
down_read(&cfg->ioctl_rwsem);
/* Restrict command set to physical support only for internal LUN */
if (afu->internal_lun)
switch (cmd) {
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_USER_VIRTUAL:
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_VLUN_CLONE:
dev_dbg(dev, "%s: %s not supported for lun_mode=%d\n",
__func__, decode_ioctl(cmd), afu->internal_lun);
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
switch (cmd) {
case DK_CXLFLASH_ATTACH:
case DK_CXLFLASH_USER_DIRECT:
case DK_CXLFLASH_RELEASE:
case DK_CXLFLASH_DETACH:
case DK_CXLFLASH_VERIFY:
case DK_CXLFLASH_RECOVER_AFU:
case DK_CXLFLASH_USER_VIRTUAL:
case DK_CXLFLASH_VLUN_RESIZE:
case DK_CXLFLASH_VLUN_CLONE:
dev_dbg(dev, "%s: %s (%08X) on dev(%d/%d/%d/%llu)\n",
__func__, decode_ioctl(cmd), cmd, shost->host_no,
sdev->channel, sdev->id, sdev->lun);
rc = ioctl_common(sdev, cmd);
if (unlikely(rc))
goto cxlflash_ioctl_exit;
/* fall through */
case DK_CXLFLASH_MANAGE_LUN:
known_ioctl = true;
idx = _IOC_NR(cmd) - _IOC_NR(DK_CXLFLASH_ATTACH);
size = ioctl_tbl[idx].size;
do_ioctl = ioctl_tbl[idx].ioctl;
if (likely(do_ioctl))
break;
/* fall through */
default:
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
if (unlikely(copy_from_user(&buf, arg, size))) {
dev_err(dev, "%s: copy_from_user() fail! "
"size=%lu cmd=%d (%s) arg=%p\n",
__func__, size, cmd, decode_ioctl(cmd), arg);
rc = -EFAULT;
goto cxlflash_ioctl_exit;
}
hdr = (struct dk_cxlflash_hdr *)&buf;
if (hdr->version != DK_CXLFLASH_VERSION_0) {
dev_dbg(dev, "%s: Version %u not supported for %s\n",
__func__, hdr->version, decode_ioctl(cmd));
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
if (hdr->rsvd[0] || hdr->rsvd[1] || hdr->rsvd[2] || hdr->return_flags) {
dev_dbg(dev, "%s: Reserved/rflags populated!\n", __func__);
rc = -EINVAL;
goto cxlflash_ioctl_exit;
}
rc = do_ioctl(sdev, (void *)&buf);
if (likely(!rc))
if (unlikely(copy_to_user(arg, &buf, size))) {
dev_err(dev, "%s: copy_to_user() fail! "
"size=%lu cmd=%d (%s) arg=%p\n",
__func__, size, cmd, decode_ioctl(cmd), arg);
rc = -EFAULT;
}
/* fall through to exit */
cxlflash_ioctl_exit:
up_read(&cfg->ioctl_rwsem);
if (unlikely(rc && known_ioctl))
dev_err(dev, "%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
"returned rc %d\n", __func__,
decode_ioctl(cmd), cmd, shost->host_no,
sdev->channel, sdev->id, sdev->lun, rc);
else
dev_dbg(dev, "%s: ioctl %s (%08X) on dev(%d/%d/%d/%llu) "
"returned rc %d\n", __func__, decode_ioctl(cmd),
cmd, shost->host_no, sdev->channel, sdev->id,
sdev->lun, rc);
return rc;
}