Johannes Berg da6a4352e7 mac80211: separate encoding/bandwidth from flags ... We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>		2017-04-28 10:41:45 +02:00
..
ahb.c	net: ath5k: fix build errors when linux/phy*.h is removed from net/dsa.h	2017-02-10 13:51:04 -05:00
ani.c	cfg80211: remove enum ieee80211_band	2016-04-12 15:56:15 +02:00
ani.h
ath5k.h	average: change to declare precision, not factor	2017-03-02 08:32:46 +01:00
attach.c	cfg80211: remove enum ieee80211_band	2016-04-12 15:56:15 +02:00
base.c	mac80211: separate encoding/bandwidth from flags	2017-04-28 10:41:45 +02:00
base.h
caps.c
debug.c	ath5k: drop duplicate header vmalloc.h	2016-12-01 13:23:19 +02:00
debug.h
desc.c
desc.h
dma.c
eeprom.c
eeprom.h
gpio.c
initvals.c
Kconfig	ath5k: use DECLARE_EWMA	2015-08-20 14:10:22 -07:00
led.c	ath5k: Change led pin configuration for compaq c700 laptop	2016-04-04 17:03:22 +03:00
mac80211-ops.c	ath5k: drop bogus warning on drv_set_key with unsupported cipher	2017-01-12 12:56:37 +02:00
Makefile	ath5k: revert AHB bus support removing	2014-11-24 07:45:28 +01:00
pci.c	PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use	2014-08-12 12:15:14 -06:00
pcu.c	ath5k: fix misplaced default label in sifs switch	2016-06-14 15:18:09 +03:00
phy.c	cfg80211: remove enum ieee80211_band	2016-04-12 15:56:15 +02:00
qcu.c	cfg80211: remove enum ieee80211_band	2016-04-12 15:56:15 +02:00
reg.h
reset.c	cfg80211: remove enum ieee80211_band	2016-04-12 15:56:15 +02:00
rfbuffer.h
rfgain.h
rfkill.c
sysfs.c
trace.h