linux/arch/arm/mach-mvebu/pmsu.c
Linus Torvalds 56e0464980 ARM: SoC platform updates for v4.4
New and/or improved SoC support for this release:
 
  - Marvell Berlin:
    * Enable standard DT-based cpufreq
    * Add CPU hotplug support
  - Freescale:
    * Ethernet init for i.MX7D
    * Suspend/resume support for i.MX6UL
  - Allwinner:
    * Support for R8 chipset (used on NTC's $9 C.H.I.P board)
  - Mediatek:
    * SMP support for some platforms
  - Uniphier:
    * L2 support
    * Cleaned up SMP support, etc.
 
 + A handful of other patches around above functionality, and a few other
 smaller changes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQCmaAAoJEIwa5zzehBx3F/0QAKIYmvmJM3sUanNEEwhRilx+
 3xhSgld7e25suLGwrNapTkd8VzVB4b8GnJhNShNk+l5WqfqICHCB4Aru2NmJHY8V
 yPj5vBrgJTVMnIiH7CRDPz9IlwAkWM4MmWi4PgFuhrk1T/0wPKPNMc40OWOloTeD
 gA5YmbbX1hNOqKoI/z+DK7CEdp1lHrEjeYIbnQ0SldFzkY9NKhrI784gtcz3si6E
 19pFQ9LA7EtEv7aRcFOA0sazeooa2wiJ9P9L31Mn5APZBJj5H8HjyKdvOmJ8neQn
 +b77Tya11Q70U57uDq69l0rl58fpy650uTwYaLNGWmUdTgOiGMWN05lvIVNrQd/R
 gP+VEQDGsTH6kqOCy9gyLCmn9q9I7l0t9lwcu5TP52Xy9vqVq9rb388MkcPcsWk8
 cYPvD8RcSaywZUV3YJgbYozBfVuf5rLVus6D54pMXe3N12KGaNBt8kk4co4jBwvh
 b//1urA82cdlEAZ/kiqHXjRMq/ht+dxtb6sSVOJ9frxPLuc7g1z4ORC+Z0PTS5WC
 zB0hMzPnTwXeqHcYpV4wP/vGtgZGpLevBkK7pKVdqKZykV8BS4FiT4HFp6Rghxs3
 dxAz7JjQUle6KOX7YfuHdpLnyZFWQvLYyTn946xGKpw2QH/iWLwECpet2I87QzVs
 QkEkGygPhK4QcGccxz9N
 =h5xk
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "New and/or improved SoC support for this release:

  Marvell Berlin:
     - Enable standard DT-based cpufreq
     - Add CPU hotplug support

  Freescale:
     - Ethernet init for i.MX7D
     - Suspend/resume support for i.MX6UL

  Allwinner:
     - Support for R8 chipset (used on NTC's $9 C.H.I.P board)

  Mediatek:
     - SMP support for some platforms

  Uniphier:
     - L2 support
     - Cleaned up SMP support, etc.

  plus a handful of other patches around above functionality, and a few
  other smaller changes"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM: uniphier: rework SMP operations to use trampoline code
  ARM: uniphier: add outer cache support
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: mvebu: add broken-idle option
  ARM: orion5x: use mac_pton() helper
  ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
  ARM: sunxi: Add R8 support
  ARM: digicolor: select pinctrl/gpio driver
  arm: berlin: add CPU hotplug support
  arm: berlin: use non-self-cleared reset register to reset cpu
  ARM: mediatek: add smp bringup code
  ARM: mediatek: enable gpt6 on boot up to make arch timer working
  soc: mediatek: Fix random hang up issue while kernel init
  soc: ti: qmss: make acc queue support optional in the driver
  soc: ti: add firmware file name as part of the driver
  Documentation: dt: soc: Add description for knav qmss driver
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ...
2015-11-10 14:56:23 -08:00

694 lines
18 KiB
C

/*
* Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
*
* Copyright (C) 2012 Marvell
*
* Yehuda Yitschak <yehuday@marvell.com>
* Gregory Clement <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* The Armada 370 and Armada XP SOCs have a power management service
* unit which is responsible for powering down and waking up CPUs and
* other SOC units
*/
#define pr_fmt(fmt) "mvebu-pmsu: " fmt
#include <linux/clk.h>
#include <linux/cpu_pm.h>
#include <linux/cpufreq-dt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/resource.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
#include "common.h"
#define PMSU_BASE_OFFSET 0x100
#define PMSU_REG_SIZE 0x1000
/* PMSU MP registers */
#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
#define PMSU_EVENT_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x120)
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE BIT(1)
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK BIT(17)
#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
/* PMSU fabric registers */
#define L2C_NFABRIC_PM_CTL 0x4
#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
/* PMSU delay registers */
#define PMSU_POWERDOWN_DELAY 0xF04
#define PMSU_POWERDOWN_DELAY_PMU BIT(1)
#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE
#define PMSU_DFLT_ARMADA38X_DELAY 0x64
/* CA9 MPcore SoC Control registers */
#define MPCORE_RESET_CTL 0x64
#define MPCORE_RESET_CTL_L2 BIT(0)
#define MPCORE_RESET_CTL_DEBUG BIT(16)
#define SRAM_PHYS_BASE 0xFFFF0000
#define BOOTROM_BASE 0xFFF00000
#define BOOTROM_SIZE 0x100000
#define ARMADA_370_CRYPT0_ENG_TARGET 0x9
#define ARMADA_370_CRYPT0_ENG_ATTR 0x1
extern void ll_disable_coherency(void);
extern void ll_enable_coherency(void);
extern void armada_370_xp_cpu_resume(void);
extern void armada_38x_cpu_resume(void);
static phys_addr_t pmsu_mp_phys_base;
static void __iomem *pmsu_mp_base;
static void *mvebu_cpu_resume;
static const struct of_device_id of_pmsu_table[] = {
{ .compatible = "marvell,armada-370-pmsu", },
{ .compatible = "marvell,armada-370-xp-pmsu", },
{ .compatible = "marvell,armada-380-pmsu", },
{ /* end of list */ },
};
void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
{
writel(virt_to_phys(boot_addr), pmsu_mp_base +
PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
}
extern unsigned char mvebu_boot_wa_start;
extern unsigned char mvebu_boot_wa_end;
/*
* This function sets up the boot address workaround needed for SMP
* boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the
* BootROM Mbus window, and instead remaps a crypto SRAM into which a
* custom piece of code is copied to replace the problematic BootROM.
*/
int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
unsigned int crypto_eng_attribute,
phys_addr_t resume_addr_reg)
{
void __iomem *sram_virt_base;
u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start;
mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,
SRAM_PHYS_BASE, SZ_64K);
sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
if (!sram_virt_base) {
pr_err("Unable to map SRAM to setup the boot address WA\n");
return -ENOMEM;
}
memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len);
/*
* The last word of the code copied in SRAM must contain the
* physical base address of the PMSU register. We
* intentionally store this address in the native endianness
* of the system.
*/
__raw_writel((unsigned long)resume_addr_reg,
sram_virt_base + code_len - 4);
iounmap(sram_virt_base);
return 0;
}
static int __init mvebu_v7_pmsu_init(void)
{
struct device_node *np;
struct resource res;
int ret = 0;
np = of_find_matching_node(NULL, of_pmsu_table);
if (!np)
return 0;
pr_info("Initializing Power Management Service Unit\n");
if (of_address_to_resource(np, 0, &res)) {
pr_err("unable to get resource\n");
ret = -ENOENT;
goto out;
}
if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
pr_warn(FW_WARN "deprecated pmsu binding\n");
res.start = res.start - PMSU_BASE_OFFSET;
res.end = res.start + PMSU_REG_SIZE - 1;
}
if (!request_mem_region(res.start, resource_size(&res),
np->full_name)) {
pr_err("unable to request region\n");
ret = -EBUSY;
goto out;
}
pmsu_mp_phys_base = res.start;
pmsu_mp_base = ioremap(res.start, resource_size(&res));
if (!pmsu_mp_base) {
pr_err("unable to map registers\n");
release_mem_region(res.start, resource_size(&res));
ret = -ENOMEM;
goto out;
}
out:
of_node_put(np);
return ret;
}
static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void)
{
u32 reg;
if (pmsu_mp_base == NULL)
return;
/* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
}
enum pmsu_idle_prepare_flags {
PMSU_PREPARE_NORMAL = 0,
PMSU_PREPARE_DEEP_IDLE = BIT(0),
PMSU_PREPARE_SNOOP_DISABLE = BIT(1),
};
/* No locking is needed because we only access per-CPU registers */
static int mvebu_v7_pmsu_idle_prepare(unsigned long flags)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
if (pmsu_mp_base == NULL)
return -EINVAL;
/*
* Adjust the PMSU configuration to wait for WFI signal, enable
* IRQ and FIQ as wakeup events, set wait for snoop queue empty
* indication and mask IRQ and FIQ from CPU
*/
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
PMSU_STATUS_AND_MASK_IRQ_MASK |
PMSU_STATUS_AND_MASK_FIQ_MASK;
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
/* ask HW to power down the L2 Cache if needed */
if (flags & PMSU_PREPARE_DEEP_IDLE)
reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
/* request power down */
reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
if (flags & PMSU_PREPARE_SNOOP_DISABLE) {
/* Disable snoop disable by HW - SW is taking care of it */
reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
}
return 0;
}
int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
{
unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE;
int ret;
if (deepidle)
flags |= PMSU_PREPARE_DEEP_IDLE;
ret = mvebu_v7_pmsu_idle_prepare(flags);
if (ret)
return ret;
v7_exit_coherency_flush(all);
ll_disable_coherency();
dsb();
wfi();
/* If we are here, wfi failed. As processors run out of
* coherency for some time, tlbs might be stale, so flush them
*/
local_flush_tlb_all();
ll_enable_coherency();
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, %0 \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
: : "Ir" (CR_C) : "r0");
pr_debug("Failed to suspend the system\n");
return 0;
}
static int armada_370_xp_cpu_suspend(unsigned long deepidle)
{
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
int armada_38x_do_cpu_suspend(unsigned long deepidle)
{
unsigned long flags = 0;
if (deepidle)
flags |= PMSU_PREPARE_DEEP_IDLE;
mvebu_v7_pmsu_idle_prepare(flags);
/*
* Already flushed cache, but do it again as the outer cache
* functions dirty the cache with spinlocks
*/
v7_exit_coherency_flush(louis);
scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF);
cpu_do_idle();
return 1;
}
static int armada_38x_cpu_suspend(unsigned long deepidle)
{
return cpu_suspend(false, armada_38x_do_cpu_suspend);
}
/* No locking is needed because we only access per-CPU registers */
void mvebu_v7_pmsu_idle_exit(void)
{
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
u32 reg;
if (pmsu_mp_base == NULL)
return;
/* cancel ask HW to power down the L2 Cache if possible */
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
/* cancel Enable wakeup events and mask interrupts */
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
}
static int mvebu_v7_cpu_pm_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
if (action == CPU_PM_ENTER) {
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume);
} else if (action == CPU_PM_EXIT) {
mvebu_v7_pmsu_idle_exit();
}
return NOTIFY_OK;
}
static struct notifier_block mvebu_v7_cpu_pm_notifier = {
.notifier_call = mvebu_v7_cpu_pm_notify,
};
static struct platform_device mvebu_v7_cpuidle_device;
static int broken_idle(struct device_node *np)
{
if (of_property_read_bool(np, "broken-idle")) {
pr_warn("CPU idle is currently broken: disabling\n");
return 1;
}
return 0;
}
static __init int armada_370_cpuidle_init(void)
{
struct device_node *np;
phys_addr_t redirect_reg;
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
if (broken_idle(np))
goto end;
/*
* On Armada 370, there is "a slow exit process from the deep
* idle state due to heavy L1/L2 cache cleanup operations
* performed by the BootROM software". To avoid this, we
* replace the restart code of the bootrom by a a simple jump
* to the boot address. Then the code located at this boot
* address will take care of the initialization.
*/
redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0);
mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET,
ARMADA_370_CRYPT0_ENG_ATTR,
redirect_reg);
mvebu_cpu_resume = armada_370_xp_cpu_resume;
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
end:
of_node_put(np);
return 0;
}
static __init int armada_38x_cpuidle_init(void)
{
struct device_node *np;
void __iomem *mpsoc_base;
u32 reg;
pr_warn("CPU idle is currently broken on Armada 38x: disabling\n");
return 0;
np = of_find_compatible_node(NULL, NULL,
"marvell,armada-380-coherency-fabric");
if (!np)
return -ENODEV;
if (broken_idle(np))
goto end;
of_node_put(np);
np = of_find_compatible_node(NULL, NULL,
"marvell,armada-380-mpcore-soc-ctrl");
if (!np)
return -ENODEV;
mpsoc_base = of_iomap(np, 0);
BUG_ON(!mpsoc_base);
/* Set up reset mask when powering down the cpus */
reg = readl(mpsoc_base + MPCORE_RESET_CTL);
reg |= MPCORE_RESET_CTL_L2;
reg |= MPCORE_RESET_CTL_DEBUG;
writel(reg, mpsoc_base + MPCORE_RESET_CTL);
iounmap(mpsoc_base);
/* Set up delay */
reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY);
reg &= ~PMSU_POWERDOWN_DELAY_MASK;
reg |= PMSU_DFLT_ARMADA38X_DELAY;
reg |= PMSU_POWERDOWN_DELAY_PMU;
writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY);
mvebu_cpu_resume = armada_38x_cpu_resume;
mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
end:
of_node_put(np);
return 0;
}
static __init int armada_xp_cpuidle_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
if (broken_idle(np))
goto end;
mvebu_cpu_resume = armada_370_xp_cpu_resume;
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
end:
of_node_put(np);
return 0;
}
static int __init mvebu_v7_cpu_pm_init(void)
{
struct device_node *np;
int ret;
np = of_find_matching_node(NULL, of_pmsu_table);
if (!np)
return 0;
of_node_put(np);
/*
* Currently the CPU idle support for Armada 38x is broken, as
* the CPU hotplug uses some of the CPU idle functions it is
* broken too, so let's disable it
*/
if (of_machine_is_compatible("marvell,armada380")) {
cpu_hotplug_disable();
pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n");
}
if (of_machine_is_compatible("marvell,armadaxp"))
ret = armada_xp_cpuidle_init();
else if (of_machine_is_compatible("marvell,armada370"))
ret = armada_370_cpuidle_init();
else if (of_machine_is_compatible("marvell,armada380"))
ret = armada_38x_cpuidle_init();
else
return 0;
if (ret)
return ret;
mvebu_v7_pmsu_enable_l2_powerdown_onidle();
if (mvebu_v7_cpuidle_device.name)
platform_device_register(&mvebu_v7_cpuidle_device);
cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
return 0;
}
arch_initcall(mvebu_v7_cpu_pm_init);
early_initcall(mvebu_v7_pmsu_init);
static void mvebu_pmsu_dfs_request_local(void *data)
{
u32 reg;
u32 cpu = smp_processor_id();
unsigned long flags;
local_irq_save(flags);
/* Prepare to enter idle */
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
PMSU_STATUS_AND_MASK_IRQ_MASK |
PMSU_STATUS_AND_MASK_FIQ_MASK;
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
/* Request the DFS transition */
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ;
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
/* The fact of entering idle will trigger the DFS transition */
wfi();
/*
* We're back from idle, the DFS transition has completed,
* clear the idle wait indication.
*/
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
local_irq_restore(flags);
}
int mvebu_pmsu_dfs_request(int cpu)
{
unsigned long timeout;
int hwcpu = cpu_logical_map(cpu);
u32 reg;
/* Clear any previous DFS DONE event */
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE;
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
/* Mask the DFS done interrupt, since we are going to poll */
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
/* Trigger the DFS on the appropriate CPU */
smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local,
NULL, false);
/* Poll until the DFS done event is generated */
timeout = jiffies + HZ;
while (time_before(jiffies, timeout)) {
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE)
break;
udelay(10);
}
if (time_after(jiffies, timeout))
return -ETIME;
/* Restore the DFS mask to its original state */
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
return 0;
}
struct cpufreq_dt_platform_data cpufreq_dt_pd = {
.independent_clocks = true,
};
static int __init armada_xp_pmsu_cpufreq_init(void)
{
struct device_node *np;
struct resource res;
int ret, cpu;
if (!of_machine_is_compatible("marvell,armadaxp"))
return 0;
/*
* In order to have proper cpufreq handling, we need to ensure
* that the Device Tree description of the CPU clock includes
* the definition of the PMU DFS registers. If not, we do not
* register the clock notifier and the cpufreq driver. This
* piece of code is only for compatibility with old Device
* Trees.
*/
np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
if (!np)
return 0;
ret = of_address_to_resource(np, 1, &res);
if (ret) {
pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
of_node_put(np);
return 0;
}
of_node_put(np);
/*
* For each CPU, this loop registers the operating points
* supported (which are the nominal CPU frequency and half of
* it), and registers the clock notifier that will take care
* of doing the PMSU part of a frequency transition.
*/
for_each_possible_cpu(cpu) {
struct device *cpu_dev;
struct clk *clk;
int ret;
cpu_dev = get_cpu_device(cpu);
if (!cpu_dev) {
pr_err("Cannot get CPU %d\n", cpu);
continue;
}
clk = clk_get(cpu_dev, 0);
if (IS_ERR(clk)) {
pr_err("Cannot get clock for CPU %d\n", cpu);
return PTR_ERR(clk);
}
/*
* In case of a failure of dev_pm_opp_add(), we don't
* bother with cleaning up the registered OPP (there's
* no function to do so), and simply cancel the
* registration of the cpufreq device.
*/
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
if (ret) {
clk_put(clk);
return ret;
}
ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
if (ret) {
clk_put(clk);
return ret;
}
}
platform_device_register_data(NULL, "cpufreq-dt", -1,
&cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
return 0;
}
device_initcall(armada_xp_pmsu_cpufreq_init);