forked from Minki/linux
9480e307cd
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
359 lines
8.7 KiB
C
359 lines
8.7 KiB
C
/*
|
|
* omap_cf.c -- OMAP 16xx CompactFlash controller driver
|
|
*
|
|
* Copyright (c) 2005 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/tc.h>
|
|
|
|
|
|
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
|
|
* hard-wired timings to support Compact Flash memory cards; they won't work
|
|
* with various other devices (like WLAN adapters) without some external
|
|
* logic to help out.
|
|
*
|
|
* NOTE: CF controller docs disagree with address space docs as to where
|
|
* CF_BASE really lives; this is a doc erratum.
|
|
*/
|
|
#define CF_BASE 0xfffe2800
|
|
|
|
/* status; read after IRQ */
|
|
#define CF_STATUS_REG __REG16(CF_BASE + 0x00)
|
|
# define CF_STATUS_BAD_READ (1 << 2)
|
|
# define CF_STATUS_BAD_WRITE (1 << 1)
|
|
# define CF_STATUS_CARD_DETECT (1 << 0)
|
|
|
|
/* which chipselect (CS0..CS3) is used for CF (active low) */
|
|
#define CF_CFG_REG __REG16(CF_BASE + 0x02)
|
|
|
|
/* card reset */
|
|
#define CF_CONTROL_REG __REG16(CF_BASE + 0x04)
|
|
# define CF_CONTROL_RESET (1 << 0)
|
|
|
|
#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT))
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static const char driver_name[] = "omap_cf";
|
|
|
|
struct omap_cf_socket {
|
|
struct pcmcia_socket socket;
|
|
|
|
struct timer_list timer;
|
|
unsigned present:1;
|
|
unsigned active:1;
|
|
|
|
struct platform_device *pdev;
|
|
unsigned long phys_cf;
|
|
u_int irq;
|
|
};
|
|
|
|
#define POLL_INTERVAL (2 * HZ)
|
|
|
|
#define SZ_2K (2 * SZ_1K)
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int omap_cf_ss_init(struct pcmcia_socket *s)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* the timer is primarily to kick this socket's pccardd */
|
|
static void omap_cf_timer(unsigned long _cf)
|
|
{
|
|
struct omap_cf_socket *cf = (void *) _cf;
|
|
unsigned present = omap_cf_present();
|
|
|
|
if (present != cf->present) {
|
|
cf->present = present;
|
|
pr_debug("%s: card %s\n", driver_name,
|
|
present ? "present" : "gone");
|
|
pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
}
|
|
|
|
if (cf->active)
|
|
mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
|
|
}
|
|
|
|
/* This irq handler prevents "irqNNN: nobody cared" messages as drivers
|
|
* claim the card's IRQ. It may also detect some card insertions, but
|
|
* not removals; it can't always eliminate timer irqs.
|
|
*/
|
|
static irqreturn_t omap_cf_irq(int irq, void *_cf, struct pt_regs *r)
|
|
{
|
|
omap_cf_timer((unsigned long)_cf);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_cf_get_status(struct pcmcia_socket *s, u_int *sp)
|
|
{
|
|
if (!sp)
|
|
return -EINVAL;
|
|
|
|
/* FIXME power management should probably be board-specific:
|
|
* - 3VCARD vs XVCARD (OSK only handles 3VCARD)
|
|
* - POWERON (switched on/off by set_socket)
|
|
*/
|
|
if (omap_cf_present()) {
|
|
struct omap_cf_socket *cf;
|
|
|
|
*sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD;
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
s->irq.AssignedIRQ = cf->irq;
|
|
} else
|
|
*sp = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
|
|
{
|
|
u16 control;
|
|
|
|
/* FIXME some non-OSK boards will support power switching */
|
|
switch (s->Vcc) {
|
|
case 0:
|
|
case 33:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
control = CF_CONTROL_REG;
|
|
if (s->flags & SS_RESET)
|
|
CF_CONTROL_REG = CF_CONTROL_RESET;
|
|
else
|
|
CF_CONTROL_REG = 0;
|
|
|
|
pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
|
|
driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_cf_ss_suspend(struct pcmcia_socket *s)
|
|
{
|
|
pr_debug("%s: %s\n", driver_name, __FUNCTION__);
|
|
return omap_cf_set_socket(s, &dead_socket);
|
|
}
|
|
|
|
/* regions are 2K each: mem, attrib, io (and reserved-for-ide) */
|
|
|
|
static int
|
|
omap_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
|
|
{
|
|
struct omap_cf_socket *cf;
|
|
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
io->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
|
|
io->start = cf->phys_cf + SZ_4K;
|
|
io->stop = io->start + SZ_2K - 1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
omap_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
|
|
{
|
|
struct omap_cf_socket *cf;
|
|
|
|
if (map->card_start)
|
|
return -EINVAL;
|
|
cf = container_of(s, struct omap_cf_socket, socket);
|
|
map->static_start = cf->phys_cf;
|
|
map->flags &= MAP_ACTIVE|MAP_ATTRIB|MAP_16BIT;
|
|
if (map->flags & MAP_ATTRIB)
|
|
map->static_start += SZ_2K;
|
|
return 0;
|
|
}
|
|
|
|
static struct pccard_operations omap_cf_ops = {
|
|
.init = omap_cf_ss_init,
|
|
.suspend = omap_cf_ss_suspend,
|
|
.get_status = omap_cf_get_status,
|
|
.set_socket = omap_cf_set_socket,
|
|
.set_io_map = omap_cf_set_io_map,
|
|
.set_mem_map = omap_cf_set_mem_map,
|
|
};
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* NOTE: right now the only board-specific platform_data is
|
|
* "what chipselect is used". Boards could want more.
|
|
*/
|
|
|
|
static int __init omap_cf_probe(struct device *dev)
|
|
{
|
|
unsigned seg;
|
|
struct omap_cf_socket *cf;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
int irq;
|
|
int status;
|
|
|
|
seg = (int) dev->platform_data;
|
|
if (seg == 0 || seg > 3)
|
|
return -ENODEV;
|
|
|
|
/* either CFLASH.IREQ (INT_1610_CF) or some GPIO */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!irq)
|
|
return -EINVAL;
|
|
|
|
cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
|
|
if (!cf)
|
|
return -ENOMEM;
|
|
init_timer(&cf->timer);
|
|
cf->timer.function = omap_cf_timer;
|
|
cf->timer.data = (unsigned long) cf;
|
|
|
|
cf->pdev = pdev;
|
|
dev_set_drvdata(dev, cf);
|
|
|
|
/* this primarily just shuts up irq handling noise */
|
|
status = request_irq(irq, omap_cf_irq, SA_SHIRQ,
|
|
driver_name, cf);
|
|
if (status < 0)
|
|
goto fail0;
|
|
cf->irq = irq;
|
|
cf->socket.pci_irq = irq;
|
|
|
|
switch (seg) {
|
|
/* NOTE: CS0 could be configured too ... */
|
|
case 1:
|
|
cf->phys_cf = OMAP_CS1_PHYS;
|
|
break;
|
|
case 2:
|
|
cf->phys_cf = OMAP_CS2_PHYS;
|
|
break;
|
|
case 3:
|
|
cf->phys_cf = omap_cs3_phys();
|
|
break;
|
|
default:
|
|
goto fail1;
|
|
}
|
|
|
|
/* pcmcia layer only remaps "real" memory */
|
|
cf->socket.io_offset = (unsigned long)
|
|
ioremap(cf->phys_cf + SZ_4K, SZ_2K);
|
|
if (!cf->socket.io_offset)
|
|
goto fail1;
|
|
|
|
if (!request_mem_region(cf->phys_cf, SZ_8K, driver_name))
|
|
goto fail1;
|
|
|
|
/* NOTE: CF conflicts with MMC1 */
|
|
omap_cfg_reg(W11_1610_CF_CD1);
|
|
omap_cfg_reg(P11_1610_CF_CD2);
|
|
omap_cfg_reg(R11_1610_CF_IOIS16);
|
|
omap_cfg_reg(V10_1610_CF_IREQ);
|
|
omap_cfg_reg(W10_1610_CF_RESET);
|
|
|
|
CF_CFG_REG = ~(1 << seg);
|
|
|
|
pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
|
|
|
|
/* NOTE: better EMIFS setup might support more cards; but the
|
|
* TRM only shows how to affect regular flash signals, not their
|
|
* CF/PCMCIA variants...
|
|
*/
|
|
pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
|
|
seg, EMIFS_CCS(seg), EMIFS_ACS(seg));
|
|
EMIFS_CCS(seg) = 0x0004a1b3; /* synch mode 4 etc */
|
|
EMIFS_ACS(seg) = 0x00000000; /* OE hold/setup */
|
|
|
|
/* CF uses armxor_ck, which is "always" available */
|
|
|
|
pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
|
|
CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG,
|
|
omap_cf_present() ? "present" : "(not present)");
|
|
|
|
cf->socket.owner = THIS_MODULE;
|
|
cf->socket.dev.dev = dev;
|
|
cf->socket.ops = &omap_cf_ops;
|
|
cf->socket.resource_ops = &pccard_static_ops;
|
|
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
|
|
| SS_CAP_MEM_ALIGN;
|
|
cf->socket.map_size = SZ_2K;
|
|
|
|
status = pcmcia_register_socket(&cf->socket);
|
|
if (status < 0)
|
|
goto fail2;
|
|
|
|
cf->active = 1;
|
|
mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
|
|
return 0;
|
|
|
|
fail2:
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
release_mem_region(cf->phys_cf, SZ_8K);
|
|
fail1:
|
|
free_irq(irq, cf);
|
|
fail0:
|
|
kfree(cf);
|
|
return status;
|
|
}
|
|
|
|
static int __devexit omap_cf_remove(struct device *dev)
|
|
{
|
|
struct omap_cf_socket *cf = dev_get_drvdata(dev);
|
|
|
|
cf->active = 0;
|
|
pcmcia_unregister_socket(&cf->socket);
|
|
del_timer_sync(&cf->timer);
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
release_mem_region(cf->phys_cf, SZ_8K);
|
|
free_irq(cf->irq, cf);
|
|
kfree(cf);
|
|
return 0;
|
|
}
|
|
|
|
static struct device_driver omap_cf_driver = {
|
|
.name = (char *) driver_name,
|
|
.bus = &platform_bus_type,
|
|
.probe = omap_cf_probe,
|
|
.remove = __devexit_p(omap_cf_remove),
|
|
.suspend = pcmcia_socket_dev_suspend,
|
|
.resume = pcmcia_socket_dev_resume,
|
|
};
|
|
|
|
static int __init omap_cf_init(void)
|
|
{
|
|
if (cpu_is_omap16xx())
|
|
driver_register(&omap_cf_driver);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit omap_cf_exit(void)
|
|
{
|
|
if (cpu_is_omap16xx())
|
|
driver_unregister(&omap_cf_driver);
|
|
}
|
|
|
|
module_init(omap_cf_init);
|
|
module_exit(omap_cf_exit);
|
|
|
|
MODULE_DESCRIPTION("OMAP CF Driver");
|
|
MODULE_LICENSE("GPL");
|