forked from Minki/linux
c8ecd27da7
Since family 11h processors, AMD is exclusively using 7-bit VID codes transmitted using a serial protocol over two pins (clock and data.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: David Hubbard <david.c.hubbard@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
318 lines
10 KiB
C
318 lines
10 KiB
C
/*
|
|
* hwmon-vid.c - VID/VRM/VRD voltage conversions
|
|
*
|
|
* Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
|
|
*
|
|
* Partly imported from i2c-vid.h of the lm_sensors project
|
|
* Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
* With assistance from Trent Piepho <xyzzy@speakeasy.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/hwmon-vid.h>
|
|
|
|
/*
|
|
* Common code for decoding VID pins.
|
|
*
|
|
* References:
|
|
*
|
|
* For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
|
|
* available at http://developer.intel.com/.
|
|
*
|
|
* For VRD 10.0 and up, "VRD x.y Design Guide",
|
|
* available at http://developer.intel.com/.
|
|
*
|
|
* AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
|
|
* http://support.amd.com/us/Processor_TechDocs/26094.PDF
|
|
* Table 74. VID Code Voltages
|
|
* This corresponds to an arbitrary VRM code of 24 in the functions below.
|
|
* These CPU models (K8 revision <= E) have 5 VID pins. See also:
|
|
* Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
|
|
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
|
|
*
|
|
* AMD NPT Family 0Fh Processors, AMD Publication 32559,
|
|
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
|
|
* Table 71. VID Code Voltages
|
|
* This corresponds to an arbitrary VRM code of 25 in the functions below.
|
|
* These CPU models (K8 revision >= F) have 6 VID pins. See also:
|
|
* Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
|
|
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
|
|
*
|
|
* The 17 specification is in fact Intel Mobile Voltage Positioning -
|
|
* (IMVP-II). You can find more information in the datasheet of Max1718
|
|
* http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
|
|
*
|
|
* The 13 specification corresponds to the Intel Pentium M series. There
|
|
* doesn't seem to be any named specification for these. The conversion
|
|
* tables are detailed directly in the various Pentium M datasheets:
|
|
* http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
|
|
*
|
|
* The 14 specification corresponds to Intel Core series. There
|
|
* doesn't seem to be any named specification for these. The conversion
|
|
* tables are detailed directly in the various Pentium Core datasheets:
|
|
* http://www.intel.com/design/mobile/datashts/309221.htm
|
|
*
|
|
* The 110 (VRM 11) specification corresponds to Intel Conroe based series.
|
|
* http://www.intel.com/design/processor/applnots/313214.htm
|
|
*/
|
|
|
|
/*
|
|
* vrm is the VRM/VRD document version multiplied by 10.
|
|
* val is the 4-bit or more VID code.
|
|
* Returned value is in mV to avoid floating point in the kernel.
|
|
* Some VID have some bits in uV scale, this is rounded to mV.
|
|
*/
|
|
int vid_from_reg(int val, u8 vrm)
|
|
{
|
|
int vid;
|
|
|
|
switch (vrm) {
|
|
|
|
case 100: /* VRD 10.0 */
|
|
/* compute in uV, round to mV */
|
|
val &= 0x3f;
|
|
if ((val & 0x1f) == 0x1f)
|
|
return 0;
|
|
if ((val & 0x1f) <= 0x09 || val == 0x0a)
|
|
vid = 1087500 - (val & 0x1f) * 25000;
|
|
else
|
|
vid = 1862500 - (val & 0x1f) * 25000;
|
|
if (val & 0x20)
|
|
vid -= 12500;
|
|
return (vid + 500) / 1000;
|
|
|
|
case 110: /* Intel Conroe */
|
|
/* compute in uV, round to mV */
|
|
val &= 0xff;
|
|
if (val < 0x02 || val > 0xb2)
|
|
return 0;
|
|
return (1600000 - (val - 2) * 6250 + 500) / 1000;
|
|
|
|
case 24: /* Athlon64 & Opteron */
|
|
val &= 0x1f;
|
|
if (val == 0x1f)
|
|
return 0;
|
|
/* fall through */
|
|
case 25: /* AMD NPT 0Fh */
|
|
val &= 0x3f;
|
|
return (val < 32) ? 1550 - 25 * val
|
|
: 775 - (25 * (val - 31)) / 2;
|
|
|
|
case 26: /* AMD family 10h to 15h, serial VID */
|
|
val &= 0x7f;
|
|
if (val >= 0x7c)
|
|
return 0;
|
|
return DIV_ROUND_CLOSEST(15500 - 125 * val, 10);
|
|
|
|
case 91: /* VRM 9.1 */
|
|
case 90: /* VRM 9.0 */
|
|
val &= 0x1f;
|
|
return val == 0x1f ? 0 :
|
|
1850 - val * 25;
|
|
|
|
case 85: /* VRM 8.5 */
|
|
val &= 0x1f;
|
|
return (val & 0x10 ? 25 : 0) +
|
|
((val & 0x0f) > 0x04 ? 2050 : 1250) -
|
|
((val & 0x0f) * 50);
|
|
|
|
case 84: /* VRM 8.4 */
|
|
val &= 0x0f;
|
|
/* fall through */
|
|
case 82: /* VRM 8.2 */
|
|
val &= 0x1f;
|
|
return val == 0x1f ? 0 :
|
|
val & 0x10 ? 5100 - (val) * 100 :
|
|
2050 - (val) * 50;
|
|
case 17: /* Intel IMVP-II */
|
|
val &= 0x1f;
|
|
return val & 0x10 ? 975 - (val & 0xF) * 25 :
|
|
1750 - val * 50;
|
|
case 13:
|
|
case 131:
|
|
val &= 0x3f;
|
|
/* Exception for Eden ULV 500 MHz */
|
|
if (vrm == 131 && val == 0x3f)
|
|
val++;
|
|
return 1708 - val * 16;
|
|
case 14: /* Intel Core */
|
|
/* compute in uV, round to mV */
|
|
val &= 0x7f;
|
|
return val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000;
|
|
default: /* report 0 for unknown */
|
|
if (vrm)
|
|
pr_warn("Requested unsupported VRM version (%u)\n",
|
|
(unsigned int)vrm);
|
|
return 0;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(vid_from_reg);
|
|
|
|
/*
|
|
* After this point is the code to automatically determine which
|
|
* VRM/VRD specification should be used depending on the CPU.
|
|
*/
|
|
|
|
struct vrm_model {
|
|
u8 vendor;
|
|
u8 family;
|
|
u8 model_from;
|
|
u8 model_to;
|
|
u8 stepping_to;
|
|
u8 vrm_type;
|
|
};
|
|
|
|
#define ANY 0xFF
|
|
|
|
#ifdef CONFIG_X86
|
|
|
|
/*
|
|
* The stepping_to parameter is highest acceptable stepping for current line.
|
|
* The model match must be exact for 4-bit values. For model values 0x10
|
|
* and above (extended model), all models below the parameter will match.
|
|
*/
|
|
|
|
static struct vrm_model vrm_models[] = {
|
|
{X86_VENDOR_AMD, 0x6, 0x0, ANY, ANY, 90}, /* Athlon Duron etc */
|
|
{X86_VENDOR_AMD, 0xF, 0x0, 0x3F, ANY, 24}, /* Athlon 64, Opteron */
|
|
/*
|
|
* In theory, all NPT family 0Fh processors have 6 VID pins and should
|
|
* thus use vrm 25, however in practice not all mainboards route the
|
|
* 6th VID pin because it is never needed. So we use the 5 VID pin
|
|
* variant (vrm 24) for the models which exist today.
|
|
*/
|
|
{X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24}, /* NPT family 0Fh */
|
|
{X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25}, /* future fam. 0Fh */
|
|
{X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25}, /* NPT family 10h */
|
|
{X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26}, /* family 11h */
|
|
{X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26}, /* family 12h */
|
|
{X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26}, /* family 14h */
|
|
{X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26}, /* family 15h */
|
|
|
|
{X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82}, /* Pentium Pro,
|
|
* Pentium II, Xeon,
|
|
* Mobile Pentium,
|
|
* Celeron */
|
|
{X86_VENDOR_INTEL, 0x6, 0x7, 0x7, ANY, 84}, /* Pentium III, Xeon */
|
|
{X86_VENDOR_INTEL, 0x6, 0x8, 0x8, ANY, 82}, /* Pentium III, Xeon */
|
|
{X86_VENDOR_INTEL, 0x6, 0x9, 0x9, ANY, 13}, /* Pentium M (130 nm) */
|
|
{X86_VENDOR_INTEL, 0x6, 0xA, 0xA, ANY, 82}, /* Pentium III Xeon */
|
|
{X86_VENDOR_INTEL, 0x6, 0xB, 0xB, ANY, 85}, /* Tualatin */
|
|
{X86_VENDOR_INTEL, 0x6, 0xD, 0xD, ANY, 13}, /* Pentium M (90 nm) */
|
|
{X86_VENDOR_INTEL, 0x6, 0xE, 0xE, ANY, 14}, /* Intel Core (65 nm) */
|
|
{X86_VENDOR_INTEL, 0x6, 0xF, ANY, ANY, 110}, /* Intel Conroe and
|
|
* later */
|
|
{X86_VENDOR_INTEL, 0xF, 0x0, 0x0, ANY, 90}, /* P4 */
|
|
{X86_VENDOR_INTEL, 0xF, 0x1, 0x1, ANY, 90}, /* P4 Willamette */
|
|
{X86_VENDOR_INTEL, 0xF, 0x2, 0x2, ANY, 90}, /* P4 Northwood */
|
|
{X86_VENDOR_INTEL, 0xF, 0x3, ANY, ANY, 100}, /* Prescott and above
|
|
* assume VRD 10 */
|
|
|
|
{X86_VENDOR_CENTAUR, 0x6, 0x7, 0x7, ANY, 85}, /* Eden ESP/Ezra */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x8, 0x7, 85}, /* Ezra T */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, 0x7, 85}, /* Nehemiah */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, ANY, 17}, /* C3-M, Eden-N */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, 0x7, 0}, /* No information */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, ANY, 13}, /* C7-M, C7,
|
|
* Eden (Esther) */
|
|
{X86_VENDOR_CENTAUR, 0x6, 0xD, 0xD, ANY, 134}, /* C7-D, C7-M, C7,
|
|
* Eden (Esther) */
|
|
};
|
|
|
|
/*
|
|
* Special case for VIA model D: there are two different possible
|
|
* VID tables, so we have to figure out first, which one must be
|
|
* used. This resolves temporary drm value 134 to 14 (Intel Core
|
|
* 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID
|
|
* + quirk for Eden ULV 500 MHz).
|
|
* Note: something similar might be needed for model A, I'm not sure.
|
|
*/
|
|
static u8 get_via_model_d_vrm(void)
|
|
{
|
|
unsigned int vid, brand, dummy;
|
|
static const char *brands[4] = {
|
|
"C7-M", "C7", "Eden", "C7-D"
|
|
};
|
|
|
|
rdmsr(0x198, dummy, vid);
|
|
vid &= 0xff;
|
|
|
|
rdmsr(0x1154, brand, dummy);
|
|
brand = ((brand >> 4) ^ (brand >> 2)) & 0x03;
|
|
|
|
if (vid > 0x3f) {
|
|
pr_info("Using %d-bit VID table for VIA %s CPU\n",
|
|
7, brands[brand]);
|
|
return 14;
|
|
} else {
|
|
pr_info("Using %d-bit VID table for VIA %s CPU\n",
|
|
6, brands[brand]);
|
|
/* Enable quirk for Eden */
|
|
return brand == 2 ? 131 : 13;
|
|
}
|
|
}
|
|
|
|
static u8 find_vrm(u8 family, u8 model, u8 stepping, u8 vendor)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vrm_models); i++) {
|
|
if (vendor == vrm_models[i].vendor &&
|
|
family == vrm_models[i].family &&
|
|
model >= vrm_models[i].model_from &&
|
|
model <= vrm_models[i].model_to &&
|
|
stepping <= vrm_models[i].stepping_to)
|
|
return vrm_models[i].vrm_type;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 vid_which_vrm(void)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(0);
|
|
u8 vrm_ret;
|
|
|
|
if (c->x86 < 6) /* Any CPU with family lower than 6 */
|
|
return 0; /* doesn't have VID */
|
|
|
|
vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor);
|
|
if (vrm_ret == 134)
|
|
vrm_ret = get_via_model_d_vrm();
|
|
if (vrm_ret == 0)
|
|
pr_info("Unknown VRM version of your x86 CPU\n");
|
|
return vrm_ret;
|
|
}
|
|
|
|
/* and now for something completely different for the non-x86 world */
|
|
#else
|
|
u8 vid_which_vrm(void)
|
|
{
|
|
pr_info("Unknown VRM version of your CPU\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
EXPORT_SYMBOL(vid_which_vrm);
|
|
|
|
MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
|
|
|
|
MODULE_DESCRIPTION("hwmon-vid driver");
|
|
MODULE_LICENSE("GPL");
|