forked from Minki/linux
302946dee9
NAND uses wait pin only to indicate device readiness after a block/page operation. It is not use to extend individual read/write cycle and so read/write wait pin monitoring must be disabled for NAND. This patch also gets rid of the below warning when NAND is accessed for the first time. omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable) Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Pekon Gupta <pekon@pek-sem.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
514 lines
13 KiB
Plaintext
514 lines
13 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/* AM437x GP EVM */
|
|
|
|
/dts-v1/;
|
|
|
|
#include "am4372.dtsi"
|
|
#include <dt-bindings/pinctrl/am43xx.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "TI AM437x GP EVM";
|
|
compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
|
|
|
|
aliases {
|
|
display0 = &lcd0;
|
|
};
|
|
|
|
vmmcsd_fixed: fixedregulator-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vtt_fixed: fixedregulator-vtt {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vtt_fixed";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 51 53 56 62 75 101 152 255>;
|
|
default-brightness-level = <8>;
|
|
};
|
|
|
|
matrix_keypad: matrix_keypad@0 {
|
|
compatible = "gpio-matrix-keypad";
|
|
debounce-delay-ms = <5>;
|
|
col-scan-delay-us = <2>;
|
|
|
|
row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
|
|
&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
|
|
&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
|
|
|
|
col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
|
|
&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
|
|
|
|
linux,keymap = <0x00000201 /* P1 */
|
|
0x00010202 /* P2 */
|
|
0x01000067 /* UP */
|
|
0x0101006a /* RIGHT */
|
|
0x02000069 /* LEFT */
|
|
0x0201006c>; /* DOWN */
|
|
};
|
|
|
|
lcd0: display {
|
|
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
|
|
label = "lcd";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_pins>;
|
|
|
|
/*
|
|
* SelLCDorHDMI, LOW to select HDMI. This is not really the
|
|
* panel's enable GPIO, but we don't have HDMI driver support nor
|
|
* support to switch between two displays, so using this gpio as
|
|
* panel's enable should be safe.
|
|
*/
|
|
enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
|
|
|
|
panel-timing {
|
|
clock-frequency = <33000000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hfront-porch = <210>;
|
|
hback-porch = <16>;
|
|
hsync-len = <30>;
|
|
vback-porch = <10>;
|
|
vfront-porch = <22>;
|
|
vsync-len = <13>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
|
|
port {
|
|
lcd_in: endpoint {
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&am43xx_pinmux {
|
|
i2c0_pins: i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
|
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
|
|
0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
|
>;
|
|
};
|
|
|
|
ecap0_pins: backlight_pins {
|
|
pinctrl-single,pins = <
|
|
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
|
|
>;
|
|
};
|
|
|
|
pixcir_ts_pins: pixcir_ts_pins {
|
|
pinctrl-single,pins = <
|
|
0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
|
|
>;
|
|
};
|
|
|
|
cpsw_default: cpsw_default {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 */
|
|
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
|
|
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
|
|
0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
|
|
0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
|
|
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
|
|
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
|
|
0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
|
|
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
|
|
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
|
|
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
|
|
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
|
|
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
|
|
>;
|
|
};
|
|
|
|
cpsw_sleep: cpsw_sleep {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 reset value */
|
|
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_default: davinci_mdio_default {
|
|
pinctrl-single,pins = <
|
|
/* MDIO */
|
|
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
|
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_sleep: davinci_mdio_sleep {
|
|
pinctrl-single,pins = <
|
|
/* MDIO reset value */
|
|
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
nand_flash_x8: nand_flash_x8 {
|
|
pinctrl-single,pins = <
|
|
0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */
|
|
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
|
0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
|
0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
|
0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
|
0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
|
0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
|
0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
|
0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
|
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
|
0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
|
|
0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
|
0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
|
0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
|
0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
|
0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
|
>;
|
|
};
|
|
|
|
dss_pins: dss_pins {
|
|
pinctrl-single,pins = <
|
|
0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
|
|
0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
|
|
0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
|
|
0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
|
|
0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
|
|
0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
|
|
0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
|
|
0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
|
|
0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
|
|
|
|
>;
|
|
};
|
|
|
|
lcd_pins: lcd_pins {
|
|
pinctrl-single,pins = <
|
|
/* GPIO 5_8 to select LCD / HDMI */
|
|
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
clock-frequency = <100000>;
|
|
|
|
tps65218: tps65218@24 {
|
|
reg = <0x24>;
|
|
compatible = "ti,tps65218";
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
|
|
interrupt-parent = <&gic>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
dcdc1: regulator-dcdc1 {
|
|
compatible = "ti,tps65218-dcdc1";
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <1144000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc2: regulator-dcdc2 {
|
|
compatible = "ti,tps65218-dcdc2";
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <912000>;
|
|
regulator-max-microvolt = <1378000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc3: regulator-dcdc3 {
|
|
compatible = "ti,tps65218-dcdc3";
|
|
regulator-name = "vdcdc3";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
dcdc5: regulator-dcdc5 {
|
|
compatible = "ti,tps65218-dcdc5";
|
|
regulator-name = "v1_0bat";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
dcdc6: regulator-dcdc6 {
|
|
compatible = "ti,tps65218-dcdc6";
|
|
regulator-name = "v1_8bat";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo1: regulator-ldo1 {
|
|
compatible = "ti,tps65218-ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pixcir_ts@5c {
|
|
compatible = "pixcir,pixcir_tangoc";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pixcir_ts_pins>;
|
|
reg = <0x5c>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <22 0>;
|
|
|
|
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
|
|
|
touchscreen-size-x = <1024>;
|
|
touchscreen-size-y = <600>;
|
|
};
|
|
};
|
|
|
|
&epwmss0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ecap0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ecap0_pins>;
|
|
};
|
|
|
|
&gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio5 {
|
|
status = "okay";
|
|
ti,no-reset-on-init;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&mac {
|
|
slaves = <1>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cpsw_default>;
|
|
pinctrl-1 = <&cpsw_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
|
pinctrl-1 = <&davinci_mdio_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nand_flash_x8>;
|
|
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
|
|
nand@0,0 {
|
|
reg = <0 0 4>; /* device IO registers */
|
|
ti,nand-ecc-opt = "bch16";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <8>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <40>;
|
|
gpmc,cs-wr-off-ns = <40>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <25>;
|
|
gpmc,adv-wr-off-ns = <25>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <20>;
|
|
gpmc,oe-on-ns = <3>;
|
|
gpmc,oe-off-ns = <30>;
|
|
gpmc,access-ns = <30>;
|
|
gpmc,rd-cycle-ns = <40>;
|
|
gpmc,wr-cycle-ns = <40>;
|
|
gpmc,wait-pin = <0>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
/* MTD partition table */
|
|
/* All SPL-* partitions are sized to minimal length
|
|
* which can be independently programmable. For
|
|
* NAND flash this is equal to size of erase-block */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "NAND.SPL";
|
|
reg = <0x00000000 0x00040000>;
|
|
};
|
|
partition@1 {
|
|
label = "NAND.SPL.backup1";
|
|
reg = <0x00040000 0x00040000>;
|
|
};
|
|
partition@2 {
|
|
label = "NAND.SPL.backup2";
|
|
reg = <0x00080000 0x00040000>;
|
|
};
|
|
partition@3 {
|
|
label = "NAND.SPL.backup3";
|
|
reg = <0x000c0000 0x00040000>;
|
|
};
|
|
partition@4 {
|
|
label = "NAND.u-boot-spl-os";
|
|
reg = <0x00100000 0x00080000>;
|
|
};
|
|
partition@5 {
|
|
label = "NAND.u-boot";
|
|
reg = <0x00180000 0x00100000>;
|
|
};
|
|
partition@6 {
|
|
label = "NAND.u-boot-env";
|
|
reg = <0x00280000 0x00040000>;
|
|
};
|
|
partition@7 {
|
|
label = "NAND.u-boot-env.backup1";
|
|
reg = <0x002c0000 0x00040000>;
|
|
};
|
|
partition@8 {
|
|
label = "NAND.kernel";
|
|
reg = <0x00300000 0x00700000>;
|
|
};
|
|
partition@9 {
|
|
label = "NAND.file-system";
|
|
reg = <0x00a00000 0x1f600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dss_pins>;
|
|
|
|
port {
|
|
dpi_out: endpoint@0 {
|
|
remote-endpoint = <&lcd_in>;
|
|
data-lines = <24>;
|
|
};
|
|
};
|
|
};
|