linux/net/irda/irlap_event.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

2335 lines
65 KiB
C

/*********************************************************************
*
* Filename: irlap_event.c
* Version: 0.9
* Description: IrLAP state machine implementation
* Status: Experimental.
* Author: Dag Brattli <dag@brattli.net>
* Created at: Sat Aug 16 00:59:29 1997
* Modified at: Sat Dec 25 21:07:57 1999
* Modified by: Dag Brattli <dag@brattli.net>
*
* Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>,
* Copyright (c) 1998 Thomas Davis <ratbert@radiks.net>
* All Rights Reserved.
* Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Neither Dag Brattli nor University of Tromsø admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
********************************************************************/
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <net/irda/irda.h>
#include <net/irda/irlap_event.h>
#include <net/irda/timer.h>
#include <net/irda/irlap.h>
#include <net/irda/irlap_frame.h>
#include <net/irda/qos.h>
#include <net/irda/parameters.h>
#include <net/irda/irlmp.h> /* irlmp_flow_indication(), ... */
#include <net/irda/irda_device.h>
#ifdef CONFIG_IRDA_FAST_RR
int sysctl_fast_poll_increase = 50;
#endif
static int irlap_state_ndm (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_query (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_reply (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_conn (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_setup (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_nrm_p (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_reset (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_nrm_s (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event,
struct sk_buff *, struct irlap_info *);
#ifdef CONFIG_IRDA_DEBUG
static const char *irlap_event[] = {
"DISCOVERY_REQUEST",
"CONNECT_REQUEST",
"CONNECT_RESPONSE",
"DISCONNECT_REQUEST",
"DATA_REQUEST",
"RESET_REQUEST",
"RESET_RESPONSE",
"SEND_I_CMD",
"SEND_UI_FRAME",
"RECV_DISCOVERY_XID_CMD",
"RECV_DISCOVERY_XID_RSP",
"RECV_SNRM_CMD",
"RECV_TEST_CMD",
"RECV_TEST_RSP",
"RECV_UA_RSP",
"RECV_DM_RSP",
"RECV_RD_RSP",
"RECV_I_CMD",
"RECV_I_RSP",
"RECV_UI_FRAME",
"RECV_FRMR_RSP",
"RECV_RR_CMD",
"RECV_RR_RSP",
"RECV_RNR_CMD",
"RECV_RNR_RSP",
"RECV_REJ_CMD",
"RECV_REJ_RSP",
"RECV_SREJ_CMD",
"RECV_SREJ_RSP",
"RECV_DISC_CMD",
"SLOT_TIMER_EXPIRED",
"QUERY_TIMER_EXPIRED",
"FINAL_TIMER_EXPIRED",
"POLL_TIMER_EXPIRED",
"DISCOVERY_TIMER_EXPIRED",
"WD_TIMER_EXPIRED",
"BACKOFF_TIMER_EXPIRED",
"MEDIA_BUSY_TIMER_EXPIRED",
};
#endif /* CONFIG_IRDA_DEBUG */
const char *irlap_state[] = {
"LAP_NDM",
"LAP_QUERY",
"LAP_REPLY",
"LAP_CONN",
"LAP_SETUP",
"LAP_OFFLINE",
"LAP_XMIT_P",
"LAP_PCLOSE",
"LAP_NRM_P",
"LAP_RESET_WAIT",
"LAP_RESET",
"LAP_NRM_S",
"LAP_XMIT_S",
"LAP_SCLOSE",
"LAP_RESET_CHECK",
};
static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info) =
{
irlap_state_ndm,
irlap_state_query,
irlap_state_reply,
irlap_state_conn,
irlap_state_setup,
irlap_state_offline,
irlap_state_xmit_p,
irlap_state_pclose,
irlap_state_nrm_p,
irlap_state_reset_wait,
irlap_state_reset,
irlap_state_nrm_s,
irlap_state_xmit_s,
irlap_state_sclose,
irlap_state_reset_check,
};
/*
* Function irda_poll_timer_expired (data)
*
* Poll timer has expired. Normally we must now send a RR frame to the
* remote device
*/
static void irlap_poll_timer_expired(void *data)
{
struct irlap_cb *self = (struct irlap_cb *) data;
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
}
/*
* Calculate and set time before we will have to send back the pf bit
* to the peer. Use in primary.
* Make sure that state is XMIT_P/XMIT_S when calling this function
* (and that nobody messed up with the state). - Jean II
*/
static void irlap_start_poll_timer(struct irlap_cb *self, int timeout)
{
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
#ifdef CONFIG_IRDA_FAST_RR
/*
* Send out the RR frames faster if our own transmit queue is empty, or
* if the peer is busy. The effect is a much faster conversation
*/
if ((skb_queue_len(&self->txq) == 0) || (self->remote_busy)) {
if (self->fast_RR == TRUE) {
/*
* Assert that the fast poll timer has not reached the
* normal poll timer yet
*/
if (self->fast_RR_timeout < timeout) {
/*
* FIXME: this should be a more configurable
* function
*/
self->fast_RR_timeout +=
(sysctl_fast_poll_increase * HZ/1000);
/* Use this fast(er) timeout instead */
timeout = self->fast_RR_timeout;
}
} else {
self->fast_RR = TRUE;
/* Start with just 0 ms */
self->fast_RR_timeout = 0;
timeout = 0;
}
} else
self->fast_RR = FALSE;
IRDA_DEBUG(3, "%s(), timeout=%d (%ld)\n", __FUNCTION__, timeout, jiffies);
#endif /* CONFIG_IRDA_FAST_RR */
if (timeout == 0)
irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
else
irda_start_timer(&self->poll_timer, timeout, self,
irlap_poll_timer_expired);
}
/*
* Function irlap_do_event (event, skb, info)
*
* Rushes through the state machine without any delay. If state == XMIT
* then send queued data frames.
*/
void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret;
if (!self || self->magic != LAP_MAGIC)
return;
IRDA_DEBUG(3, "%s(), event = %s, state = %s\n", __FUNCTION__,
irlap_event[event], irlap_state[self->state]);
ret = (*state[self->state])(self, event, skb, info);
/*
* Check if there are any pending events that needs to be executed
*/
switch (self->state) {
case LAP_XMIT_P: /* FALLTHROUGH */
case LAP_XMIT_S:
/*
* We just received the pf bit and are at the beginning
* of a new LAP transmit window.
* Check if there are any queued data frames, and do not
* try to disconnect link if we send any data frames, since
* that will change the state away form XMIT
*/
IRDA_DEBUG(2, "%s() : queue len = %d\n", __FUNCTION__,
skb_queue_len(&self->txq));
if (skb_queue_len(&self->txq)) {
/* Prevent race conditions with irlap_data_request() */
self->local_busy = TRUE;
/* Theory of operation.
* We send frames up to when we fill the window or
* reach line capacity. Those frames will queue up
* in the device queue, and the driver will slowly
* send them.
* After each frame that we send, we poll the higher
* layer for more data. It's the right time to do
* that because the link layer need to perform the mtt
* and then send the first frame, so we can afford
* to send a bit of time in kernel space.
* The explicit flow indication allow to minimise
* buffers (== lower latency), to avoid higher layer
* polling via timers (== less context switches) and
* to implement a crude scheduler - Jean II */
/* Try to send away all queued data frames */
while ((skb = skb_dequeue(&self->txq)) != NULL) {
/* Send one frame */
ret = (*state[self->state])(self, SEND_I_CMD,
skb, NULL);
/* Drop reference count.
* It will be increase as needed in
* irlap_send_data_xxx() */
kfree_skb(skb);
/* Poll the higher layers for one more frame */
irlmp_flow_indication(self->notify.instance,
FLOW_START);
if (ret == -EPROTO)
break; /* Try again later! */
}
/* Finished transmitting */
self->local_busy = FALSE;
} else if (self->disconnect_pending) {
self->disconnect_pending = FALSE;
ret = (*state[self->state])(self, DISCONNECT_REQUEST,
NULL, NULL);
}
break;
/* case LAP_NDM: */
/* case LAP_CONN: */
/* case LAP_RESET_WAIT: */
/* case LAP_RESET_CHECK: */
default:
break;
}
}
/*
* Function irlap_next_state (self, state)
*
* Switches state and provides debug information
*
*/
static inline void irlap_next_state(struct irlap_cb *self, IRLAP_STATE state)
{
/*
if (!self || self->magic != LAP_MAGIC)
return;
IRDA_DEBUG(4, "next LAP state = %s\n", irlap_state[state]);
*/
self->state = state;
}
/*
* Function irlap_state_ndm (event, skb, frame)
*
* NDM (Normal Disconnected Mode) state
*
*/
static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
discovery_t *discovery_rsp;
int ret = 0;
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case CONNECT_REQUEST:
IRDA_ASSERT(self->netdev != NULL, return -1;);
if (self->media_busy) {
/* Note : this will never happen, because we test
* media busy in irlap_connect_request() and
* postpone the event... - Jean II */
IRDA_DEBUG(0, "%s(), CONNECT_REQUEST: media busy!\n",
__FUNCTION__);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_MEDIA_BUSY);
} else {
irlap_send_snrm_frame(self, &self->qos_rx);
/* Start Final-bit timer */
irlap_start_final_timer(self, self->final_timeout);
self->retry_count = 0;
irlap_next_state(self, LAP_SETUP);
}
break;
case RECV_SNRM_CMD:
/* Check if the frame contains and I field */
if (info) {
self->daddr = info->daddr;
self->caddr = info->caddr;
irlap_next_state(self, LAP_CONN);
irlap_connect_indication(self, skb);
} else {
IRDA_DEBUG(0, "%s(), SNRM frame does not "
"contain an I field!\n", __FUNCTION__);
}
break;
case DISCOVERY_REQUEST:
IRDA_ASSERT(info != NULL, return -1;);
if (self->media_busy) {
IRDA_DEBUG(1, "%s(), DISCOVERY_REQUEST: media busy!\n",
__FUNCTION__);
/* irlap->log.condition = MEDIA_BUSY; */
/* This will make IrLMP try again */
irlap_discovery_confirm(self, NULL);
/* Note : the discovery log is not cleaned up here,
* it will be done in irlap_discovery_request()
* Jean II */
return 0;
}
self->S = info->S;
self->s = info->s;
irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE,
info->discovery);
self->frame_sent = FALSE;
self->s++;
irlap_start_slot_timer(self, self->slot_timeout);
irlap_next_state(self, LAP_QUERY);
break;
case RECV_DISCOVERY_XID_CMD:
IRDA_ASSERT(info != NULL, return -1;);
/* Assert that this is not the final slot */
if (info->s <= info->S) {
self->slot = irlap_generate_rand_time_slot(info->S,
info->s);
if (self->slot == info->s) {
discovery_rsp = irlmp_get_discovery_response();
discovery_rsp->data.daddr = info->daddr;
irlap_send_discovery_xid_frame(self, info->S,
self->slot,
FALSE,
discovery_rsp);
self->frame_sent = TRUE;
} else
self->frame_sent = FALSE;
/*
* Go to reply state until end of discovery to
* inhibit our own transmissions. Set the timer
* to not stay forever there... Jean II
*/
irlap_start_query_timer(self, info->S, info->s);
irlap_next_state(self, LAP_REPLY);
} else {
/* This is the final slot. How is it possible ?
* This would happen is both discoveries are just slightly
* offset (if they are in sync, all packets are lost).
* Most often, all the discovery requests will be received
* in QUERY state (see my comment there), except for the
* last frame that will come here.
* The big trouble when it happen is that active discovery
* doesn't happen, because nobody answer the discoveries
* frame of the other guy, so the log shows up empty.
* What should we do ?
* Not much. It's too late to answer those discovery frames,
* so we just pass the info to IrLMP who will put it in the
* log (and post an event).
* Another cause would be devices that do discovery much
* slower than us, however the latest fixes should minimise
* those cases...
* Jean II
*/
IRDA_DEBUG(1, "%s(), Receiving final discovery request, missed the discovery slots :-(\n", __FUNCTION__);
/* Last discovery request -> in the log */
irlap_discovery_indication(self, info->discovery);
}
break;
case MEDIA_BUSY_TIMER_EXPIRED:
/* A bunch of events may be postponed because the media is
* busy (usually immediately after we close a connection),
* or while we are doing discovery (state query/reply).
* In all those cases, the media busy flag will be cleared
* when it's OK for us to process those postponed events.
* This event is not mentioned in the state machines in the
* IrLAP spec. It's because they didn't consider Ultra and
* postponing connection request is optional.
* Jean II */
#ifdef CONFIG_IRDA_ULTRA
/* Send any pending Ultra frames if any */
if (!skb_queue_empty(&self->txq_ultra)) {
/* We don't send the frame, just post an event.
* Also, previously this code was in timer.c...
* Jean II */
ret = (*state[self->state])(self, SEND_UI_FRAME,
NULL, NULL);
}
#endif /* CONFIG_IRDA_ULTRA */
/* Check if we should try to connect.
* This code was previously in irlap_do_event() */
if (self->connect_pending) {
self->connect_pending = FALSE;
/* This one *should* not pend in this state, except
* if a socket try to connect and immediately
* disconnect. - clear - Jean II */
if (self->disconnect_pending)
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
else
ret = (*state[self->state])(self,
CONNECT_REQUEST,
NULL, NULL);
self->disconnect_pending = FALSE;
}
/* Note : one way to test if this code works well (including
* media busy and small busy) is to create a user space
* application generating an Ultra packet every 3.05 sec (or
* 2.95 sec) and to see how it interact with discovery.
* It's fairly easy to check that no packet is lost, that the
* packets are postponed during discovery and that after
* discovery indication you have a 100ms "gap".
* As connection request and Ultra are now processed the same
* way, this avoid the tedious job of trying IrLAP connection
* in all those cases...
* Jean II */
break;
#ifdef CONFIG_IRDA_ULTRA
case SEND_UI_FRAME:
{
int i;
/* Only allowed to repeat an operation twice */
for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) {
skb = skb_dequeue(&self->txq_ultra);
if (skb)
irlap_send_ui_frame(self, skb, CBROADCAST,
CMD_FRAME);
else
break;
/* irlap_send_ui_frame() won't increase skb reference
* count, so no dev_kfree_skb() - Jean II */
}
if (i == 2) {
/* Force us to listen 500 ms again */
irda_device_set_media_busy(self->netdev, TRUE);
}
break;
}
case RECV_UI_FRAME:
/* Only accept broadcast frames in NDM mode */
if (info->caddr != CBROADCAST) {
IRDA_DEBUG(0, "%s(), not a broadcast frame!\n",
__FUNCTION__);
} else
irlap_unitdata_indication(self, skb);
break;
#endif /* CONFIG_IRDA_ULTRA */
case RECV_TEST_CMD:
/* Remove test frame header */
skb_pull(skb, sizeof(struct test_frame));
/*
* Send response. This skb will not be sent out again, and
* will only be used to send out the same info as the cmd
*/
irlap_send_test_frame(self, CBROADCAST, info->daddr, skb);
break;
case RECV_TEST_RSP:
IRDA_DEBUG(0, "%s() not implemented!\n", __FUNCTION__);
break;
default:
IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_query (event, skb, info)
*
* QUERY state
*
*/
static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case RECV_DISCOVERY_XID_RSP:
IRDA_ASSERT(info != NULL, return -1;);
IRDA_ASSERT(info->discovery != NULL, return -1;);
IRDA_DEBUG(4, "%s(), daddr=%08x\n", __FUNCTION__,
info->discovery->data.daddr);
if (!self->discovery_log) {
IRDA_WARNING("%s: discovery log is gone! "
"maybe the discovery timeout has been set"
" to short?\n", __FUNCTION__);
break;
}
hashbin_insert(self->discovery_log,
(irda_queue_t *) info->discovery,
info->discovery->data.daddr, NULL);
/* Keep state */
/* irlap_next_state(self, LAP_QUERY); */
break;
case RECV_DISCOVERY_XID_CMD:
/* Yes, it is possible to receive those frames in this mode.
* Note that most often the last discovery request won't
* occur here but in NDM state (see my comment there).
* What should we do ?
* Not much. We are currently performing our own discovery,
* therefore we can't answer those frames. We don't want
* to change state either. We just pass the info to
* IrLMP who will put it in the log (and post an event).
* Jean II
*/
IRDA_ASSERT(info != NULL, return -1;);
IRDA_DEBUG(1, "%s(), Receiving discovery request (s = %d) while performing discovery :-(\n", __FUNCTION__, info->s);
/* Last discovery request ? */
if (info->s == 0xff)
irlap_discovery_indication(self, info->discovery);
break;
case SLOT_TIMER_EXPIRED:
/*
* Wait a little longer if we detect an incoming frame. This
* is not mentioned in the spec, but is a good thing to do,
* since we want to work even with devices that violate the
* timing requirements.
*/
if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
IRDA_DEBUG(2, "%s(), device is slow to answer, "
"waiting some more!\n", __FUNCTION__);
irlap_start_slot_timer(self, msecs_to_jiffies(10));
self->add_wait = TRUE;
return ret;
}
self->add_wait = FALSE;
if (self->s < self->S) {
irlap_send_discovery_xid_frame(self, self->S,
self->s, TRUE,
self->discovery_cmd);
self->s++;
irlap_start_slot_timer(self, self->slot_timeout);
/* Keep state */
irlap_next_state(self, LAP_QUERY);
} else {
/* This is the final slot! */
irlap_send_discovery_xid_frame(self, self->S, 0xff,
TRUE,
self->discovery_cmd);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
/*
* We are now finished with the discovery procedure,
* so now we must return the results
*/
irlap_discovery_confirm(self, self->discovery_log);
/* IrLMP should now have taken care of the log */
self->discovery_log = NULL;
}
break;
default:
IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_reply (self, event, skb, info)
*
* REPLY, we have received a XID discovery frame from a device and we
* are waiting for the right time slot to send a response XID frame
*
*/
static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
discovery_t *discovery_rsp;
int ret=0;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case QUERY_TIMER_EXPIRED:
IRDA_DEBUG(0, "%s(), QUERY_TIMER_EXPIRED <%ld>\n",
__FUNCTION__, jiffies);
irlap_next_state(self, LAP_NDM);
break;
case RECV_DISCOVERY_XID_CMD:
IRDA_ASSERT(info != NULL, return -1;);
/* Last frame? */
if (info->s == 0xff) {
del_timer(&self->query_timer);
/* info->log.condition = REMOTE; */
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_discovery_indication(self, info->discovery);
} else {
/* If it's our slot, send our reply */
if ((info->s >= self->slot) && (!self->frame_sent)) {
discovery_rsp = irlmp_get_discovery_response();
discovery_rsp->data.daddr = info->daddr;
irlap_send_discovery_xid_frame(self, info->S,
self->slot,
FALSE,
discovery_rsp);
self->frame_sent = TRUE;
}
/* Readjust our timer to accomodate devices
* doing faster or slower discovery than us...
* Jean II */
irlap_start_query_timer(self, info->S, info->s);
/* Keep state */
//irlap_next_state(self, LAP_REPLY);
}
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__,
event, irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_conn (event, skb, info)
*
* CONN, we have received a SNRM command and is waiting for the upper
* layer to accept or refuse connection
*
*/
static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[ event]);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case CONNECT_RESPONSE:
skb_pull(skb, sizeof(struct snrm_frame));
IRDA_ASSERT(self->netdev != NULL, return -1;);
irlap_qos_negotiate(self, skb);
irlap_initiate_connection_state(self);
/*
* Applying the parameters now will make sure we change speed
* *after* we have sent the next frame
*/
irlap_apply_connection_parameters(self, FALSE);
/*
* Sending this frame will force a speed change after it has
* been sent (i.e. the frame will be sent at 9600).
*/
irlap_send_ua_response_frame(self, &self->qos_rx);
#if 0
/*
* We are allowed to send two frames, but this may increase
* the connect latency, so lets not do it for now.
*/
/* This is full of good intentions, but doesn't work in
* practice.
* After sending the first UA response, we switch the
* dongle to the negotiated speed, which is usually
* different than 9600 kb/s.
* From there, there is two solutions :
* 1) The other end has received the first UA response :
* it will set up the connection, move to state LAP_NRM_P,
* and will ignore and drop the second UA response.
* Actually, it's even worse : the other side will almost
* immediately send a RR that will likely collide with the
* UA response (depending on negotiated turnaround).
* 2) The other end has not received the first UA response,
* will stay at 9600 and will never see the second UA response.
* Jean II */
irlap_send_ua_response_frame(self, &self->qos_rx);
#endif
/*
* The WD-timer could be set to the duration of the P-timer
* for this case, but it is recommended to use twice the
* value (note 3 IrLAP p. 60).
*/
irlap_start_wd_timer(self, self->wd_timeout);
irlap_next_state(self, LAP_NRM_S);
break;
case RECV_DISCOVERY_XID_CMD:
IRDA_DEBUG(3, "%s(), event RECV_DISCOVER_XID_CMD!\n",
__FUNCTION__);
irlap_next_state(self, LAP_NDM);
break;
case DISCONNECT_REQUEST:
IRDA_DEBUG(0, "%s(), Disconnect request!\n", __FUNCTION__);
irlap_send_dm_frame(self);
irlap_next_state( self, LAP_NDM);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__,
event, irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_setup (event, skb, frame)
*
* SETUP state, The local layer has transmitted a SNRM command frame to
* a remote peer layer and is awaiting a reply .
*
*/
static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case FINAL_TIMER_EXPIRED:
if (self->retry_count < self->N3) {
/*
* Perform random backoff, Wait a random number of time units, minimum
* duration half the time taken to transmitt a SNRM frame, maximum duration
* 1.5 times the time taken to transmit a SNRM frame. So this time should
* between 15 msecs and 45 msecs.
*/
irlap_start_backoff_timer(self, msecs_to_jiffies(20 +
(jiffies % 30)));
} else {
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_FOUND_NONE);
}
break;
case BACKOFF_TIMER_EXPIRED:
irlap_send_snrm_frame(self, &self->qos_rx);
irlap_start_final_timer(self, self->final_timeout);
self->retry_count++;
break;
case RECV_SNRM_CMD:
IRDA_DEBUG(4, "%s(), SNRM battle!\n", __FUNCTION__);
IRDA_ASSERT(skb != NULL, return 0;);
IRDA_ASSERT(info != NULL, return 0;);
/*
* The device with the largest device address wins the battle
* (both have sent a SNRM command!)
*/
if (info &&(info->daddr > self->saddr)) {
del_timer(&self->final_timer);
irlap_initiate_connection_state(self);
IRDA_ASSERT(self->netdev != NULL, return -1;);
skb_pull(skb, sizeof(struct snrm_frame));
irlap_qos_negotiate(self, skb);
/* Send UA frame and then change link settings */
irlap_apply_connection_parameters(self, FALSE);
irlap_send_ua_response_frame(self, &self->qos_rx);
irlap_next_state(self, LAP_NRM_S);
irlap_connect_confirm(self, skb);
/*
* The WD-timer could be set to the duration of the
* P-timer for this case, but it is recommended
* to use twice the value (note 3 IrLAP p. 60).
*/
irlap_start_wd_timer(self, self->wd_timeout);
} else {
/* We just ignore the other device! */
irlap_next_state(self, LAP_SETUP);
}
break;
case RECV_UA_RSP:
/* Stop F-timer */
del_timer(&self->final_timer);
/* Initiate connection state */
irlap_initiate_connection_state(self);
/* Negotiate connection parameters */
IRDA_ASSERT(skb->len > 10, return -1;);
skb_pull(skb, sizeof(struct ua_frame));
IRDA_ASSERT(self->netdev != NULL, return -1;);
irlap_qos_negotiate(self, skb);
/* Set the new link setting *now* (before the rr frame) */
irlap_apply_connection_parameters(self, TRUE);
self->retry_count = 0;
/* Wait for turnaround time to give a chance to the other
* device to be ready to receive us.
* Note : the time to switch speed is typically larger
* than the turnaround time, but as we don't have the other
* side speed switch time, that's our best guess...
* Jean II */
irlap_wait_min_turn_around(self, &self->qos_tx);
/* This frame will actually be sent at the new speed */
irlap_send_rr_frame(self, CMD_FRAME);
/* The timer is set to half the normal timer to quickly
* detect a failure to negociate the new connection
* parameters. IrLAP 6.11.3.2, note 3.
* Note that currently we don't process this failure
* properly, as we should do a quick disconnect.
* Jean II */
irlap_start_final_timer(self, self->final_timeout/2);
irlap_next_state(self, LAP_NRM_P);
irlap_connect_confirm(self, skb);
break;
case RECV_DM_RSP: /* FALLTHROUGH */
case RECV_DISC_CMD:
del_timer(&self->final_timer);
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__,
event, irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_offline (self, event, skb, info)
*
* OFFLINE state, not used for now!
*
*/
static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
IRDA_DEBUG( 0, "%s(), Unknown event\n", __FUNCTION__);
return -1;
}
/*
* Function irlap_state_xmit_p (self, event, skb, info)
*
* XMIT, Only the primary station has right to transmit, and we
* therefore do not expect to receive any transmissions from other
* stations.
*
*/
static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
switch (event) {
case SEND_I_CMD:
/*
* Only send frame if send-window > 0.
*/
if ((self->window > 0) && (!self->remote_busy)) {
int nextfit;
#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
struct sk_buff *skb_next;
/* With DYNAMIC_WINDOW, we keep the window size
* maximum, and adapt on the packets we are sending.
* At 115k, we can send only 2 packets of 2048 bytes
* in a 500 ms turnaround. Without this option, we
* would always limit the window to 2. With this
* option, if we send smaller packets, we can send
* up to 7 of them (always depending on QoS).
* Jean II */
/* Look at the next skb. This is safe, as we are
* the only consumer of the Tx queue (if we are not,
* we have other problems) - Jean II */
skb_next = skb_peek(&self->txq);
/* Check if a subsequent skb exist and would fit in
* the current window (with respect to turnaround
* time).
* This allow us to properly mark the current packet
* with the pf bit, to avoid falling back on the
* second test below, and avoid waiting the
* end of the window and sending a extra RR.
* Note : (skb_next != NULL) <=> (skb_queue_len() > 0)
* Jean II */
nextfit = ((skb_next != NULL) &&
((skb_next->len + skb->len) <=
self->bytes_left));
/*
* The current packet may not fit ! Because of test
* above, this should not happen any more !!!
* Test if we have transmitted more bytes over the
* link than its possible to do with the current
* speed and turn-around-time.
*/
if((!nextfit) && (skb->len > self->bytes_left)) {
IRDA_DEBUG(0, "%s(), Not allowed to transmit"
" more bytes!\n", __FUNCTION__);
/* Requeue the skb */
skb_queue_head(&self->txq, skb_get(skb));
/*
* We should switch state to LAP_NRM_P, but
* that is not possible since we must be sure
* that we poll the other side. Since we have
* used up our time, the poll timer should
* trigger anyway now, so we just wait for it
* DB
*/
/*
* Sorry, but that's not totally true. If
* we send 2000B packets, we may wait another
* 1000B until our turnaround expire. That's
* why we need to be proactive in avoiding
* coming here. - Jean II
*/
return -EPROTO;
}
/* Substract space used by this skb */
self->bytes_left -= skb->len;
#else /* CONFIG_IRDA_DYNAMIC_WINDOW */
/* Window has been adjusted for the max packet
* size, so much simpler... - Jean II */
nextfit = (skb_queue_len(&self->txq) > 0);
#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
/*
* Send data with poll bit cleared only if window > 1
* and there is more frames after this one to be sent
*/
if ((self->window > 1) && (nextfit)) {
/* More packet to send in current window */
irlap_send_data_primary(self, skb);
irlap_next_state(self, LAP_XMIT_P);
} else {
/* Final packet of window */
irlap_send_data_primary_poll(self, skb);
irlap_next_state(self, LAP_NRM_P);
/*
* Make sure state machine does not try to send
* any more frames
*/
ret = -EPROTO;
}
#ifdef CONFIG_IRDA_FAST_RR
/* Peer may want to reply immediately */
self->fast_RR = FALSE;
#endif /* CONFIG_IRDA_FAST_RR */
} else {
IRDA_DEBUG(4, "%s(), Unable to send! remote busy?\n",
__FUNCTION__);
skb_queue_head(&self->txq, skb_get(skb));
/*
* The next ret is important, because it tells
* irlap_next_state _not_ to deliver more frames
*/
ret = -EPROTO;
}
break;
case POLL_TIMER_EXPIRED:
IRDA_DEBUG(3, "%s(), POLL_TIMER_EXPIRED <%ld>\n",
__FUNCTION__, jiffies);
irlap_send_rr_frame(self, CMD_FRAME);
/* Return to NRM properly - Jean II */
self->window = self->window_size;
#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
/* Allowed to transmit a maximum number of bytes again. */
self->bytes_left = self->line_capacity;
#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
irlap_start_final_timer(self, self->final_timeout);
irlap_next_state(self, LAP_NRM_P);
break;
case DISCONNECT_REQUEST:
del_timer(&self->poll_timer);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_disc_frame(self);
irlap_flush_all_queues(self);
irlap_start_final_timer(self, self->final_timeout);
self->retry_count = 0;
irlap_next_state(self, LAP_PCLOSE);
break;
case DATA_REQUEST:
/* Nothing to do, irlap_do_event() will send the packet
* when we return... - Jean II */
break;
default:
IRDA_DEBUG(0, "%s(), Unknown event %s\n",
__FUNCTION__, irlap_event[event]);
ret = -EINVAL;
break;
}
return ret;
}
/*
* Function irlap_state_pclose (event, skb, info)
*
* PCLOSE state
*/
static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case RECV_UA_RSP: /* FALLTHROUGH */
case RECV_DM_RSP:
del_timer(&self->final_timer);
/* Set new link parameters */
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
case FINAL_TIMER_EXPIRED:
if (self->retry_count < self->N3) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_disc_frame(self);
irlap_start_final_timer(self, self->final_timeout);
self->retry_count++;
/* Keep state */
} else {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_NO_RESPONSE);
}
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d\n", __FUNCTION__, event);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_nrm_p (self, event, skb, info)
*
* NRM_P (Normal Response Mode as Primary), The primary station has given
* permissions to a secondary station to transmit IrLAP resonse frames
* (by sending a frame with the P bit set). The primary station will not
* transmit any frames and is expecting to receive frames only from the
* secondary to which transmission permissions has been given.
*/
static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
int ns_status;
int nr_status;
switch (event) {
case RECV_I_RSP: /* Optimize for the common case */
/* FIXME: must check for remote_busy below */
#ifdef CONFIG_IRDA_FAST_RR
/*
* Reset the fast_RR so we can use the fast RR code with
* full speed the next time since peer may have more frames
* to transmitt
*/
self->fast_RR = FALSE;
#endif /* CONFIG_IRDA_FAST_RR */
IRDA_ASSERT( info != NULL, return -1;);
ns_status = irlap_validate_ns_received(self, info->ns);
nr_status = irlap_validate_nr_received(self, info->nr);
/*
* Check for expected I(nformation) frame
*/
if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
/* Update Vr (next frame for us to receive) */
self->vr = (self->vr + 1) % 8;
/* Update Nr received, cleanup our retry queue */
irlap_update_nr_received(self, info->nr);
/*
* Got expected NR, so reset the
* retry_count. This is not done by IrLAP spec,
* which is strange!
*/
self->retry_count = 0;
self->ack_required = TRUE;
/* poll bit cleared? */
if (!info->pf) {
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_P);
irlap_data_indication(self, skb, FALSE);
} else {
/* No longer waiting for pf */
del_timer(&self->final_timer);
irlap_wait_min_turn_around(self, &self->qos_tx);
/* Call higher layer *before* changing state
* to give them a chance to send data in the
* next LAP frame.
* Jean II */
irlap_data_indication(self, skb, FALSE);
/* XMIT states are the most dangerous state
* to be in, because user requests are
* processed directly and may change state.
* On the other hand, in NDM_P, those
* requests are queued and we will process
* them when we return to irlap_do_event().
* Jean II
*/
irlap_next_state(self, LAP_XMIT_P);
/* This is the last frame.
* Make sure it's always called in XMIT state.
* - Jean II */
irlap_start_poll_timer(self, self->poll_timeout);
}
break;
}
/* Unexpected next to send (Ns) */
if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
{
if (!info->pf) {
irlap_update_nr_received(self, info->nr);
/*
* Wait until the last frame before doing
* anything
*/
/* Keep state */
irlap_next_state(self, LAP_NRM_P);
} else {
IRDA_DEBUG(4,
"%s(), missing or duplicate frame!\n",
__FUNCTION__);
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, CMD_FRAME);
self->ack_required = FALSE;
irlap_start_final_timer(self, self->final_timeout);
irlap_next_state(self, LAP_NRM_P);
}
break;
}
/*
* Unexpected next to receive (Nr)
*/
if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
{
if (info->pf) {
self->vr = (self->vr + 1) % 8;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
/* Resend rejected frames */
irlap_resend_rejected_frames(self, CMD_FRAME);
self->ack_required = FALSE;
/* Make sure we account for the time
* to transmit our frames. See comemnts
* in irlap_send_data_primary_poll().
* Jean II */
irlap_start_final_timer(self, 2 * self->final_timeout);
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_P);
irlap_data_indication(self, skb, FALSE);
} else {
/*
* Do not resend frames until the last
* frame has arrived from the other
* device. This is not documented in
* IrLAP!!
*/
self->vr = (self->vr + 1) % 8;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
self->ack_required = FALSE;
/* Keep state, do not move this line!*/
irlap_next_state(self, LAP_NRM_P);
irlap_data_indication(self, skb, FALSE);
}
break;
}
/*
* Unexpected next to send (Ns) and next to receive (Nr)
* Not documented by IrLAP!
*/
if ((ns_status == NS_UNEXPECTED) &&
(nr_status == NR_UNEXPECTED))
{
IRDA_DEBUG(4, "%s(), unexpected nr and ns!\n",
__FUNCTION__);
if (info->pf) {
/* Resend rejected frames */
irlap_resend_rejected_frames(self, CMD_FRAME);
/* Give peer some time to retransmit!
* But account for our own Tx. */
irlap_start_final_timer(self, 2 * self->final_timeout);
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_P);
} else {
/* Update Nr received */
/* irlap_update_nr_received( info->nr); */
self->ack_required = FALSE;
}
break;
}
/*
* Invalid NR or NS
*/
if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) {
if (info->pf) {
del_timer(&self->final_timer);
irlap_next_state(self, LAP_RESET_WAIT);
irlap_disconnect_indication(self, LAP_RESET_INDICATION);
self->xmitflag = TRUE;
} else {
del_timer(&self->final_timer);
irlap_disconnect_indication(self, LAP_RESET_INDICATION);
self->xmitflag = FALSE;
}
break;
}
IRDA_DEBUG(1, "%s(), Not implemented!\n", __FUNCTION__);
IRDA_DEBUG(1, "%s(), event=%s, ns_status=%d, nr_status=%d\n",
__FUNCTION__, irlap_event[event], ns_status, nr_status);
break;
case RECV_UI_FRAME:
/* Poll bit cleared? */
if (!info->pf) {
irlap_data_indication(self, skb, TRUE);
irlap_next_state(self, LAP_NRM_P);
} else {
del_timer(&self->final_timer);
irlap_data_indication(self, skb, TRUE);
irlap_next_state(self, LAP_XMIT_P);
IRDA_DEBUG(1, "%s: RECV_UI_FRAME: next state %s\n", __FUNCTION__, irlap_state[self->state]);
irlap_start_poll_timer(self, self->poll_timeout);
}
break;
case RECV_RR_RSP:
/*
* If you get a RR, the remote isn't busy anymore,
* no matter what the NR
*/
self->remote_busy = FALSE;
/*
* Nr as expected?
*/
ret = irlap_validate_nr_received(self, info->nr);
if (ret == NR_EXPECTED) {
/* Stop final timer */
del_timer(&self->final_timer);
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
/*
* Got expected NR, so reset the retry_count. This
* is not done by the IrLAP standard , which is
* strange! DB.
*/
self->retry_count = 0;
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_next_state(self, LAP_XMIT_P);
/* Start poll timer */
irlap_start_poll_timer(self, self->poll_timeout);
} else if (ret == NR_UNEXPECTED) {
IRDA_ASSERT(info != NULL, return -1;);
/*
* Unexpected nr!
*/
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
IRDA_DEBUG(4, "RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, "
"vs=%d, vr=%d\n",
self->retry_count, info->nr, self->va,
self->vs, self->vr);
/* Resend rejected frames */
irlap_resend_rejected_frames(self, CMD_FRAME);
/* Final timer ??? Jean II */
irlap_next_state(self, LAP_NRM_P);
} else if (ret == NR_INVALID) {
IRDA_DEBUG(1, "%s(), Received RR with "
"invalid nr !\n", __FUNCTION__);
del_timer(&self->final_timer);
irlap_next_state(self, LAP_RESET_WAIT);
irlap_disconnect_indication(self, LAP_RESET_INDICATION);
self->xmitflag = TRUE;
}
break;
case RECV_RNR_RSP:
IRDA_ASSERT(info != NULL, return -1;);
/* Stop final timer */
del_timer(&self->final_timer);
self->remote_busy = TRUE;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
irlap_next_state(self, LAP_XMIT_P);
/* Start poll timer */
irlap_start_poll_timer(self, self->poll_timeout);
break;
case RECV_FRMR_RSP:
del_timer(&self->final_timer);
self->xmitflag = TRUE;
irlap_next_state(self, LAP_RESET_WAIT);
irlap_reset_indication(self);
break;
case FINAL_TIMER_EXPIRED:
/*
* We are allowed to wait for additional 300 ms if
* final timer expires when we are in the middle
* of receiving a frame (page 45, IrLAP). Check that
* we only do this once for each frame.
*/
if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
IRDA_DEBUG(1, "FINAL_TIMER_EXPIRED when receiving a "
"frame! Waiting a little bit more!\n");
irlap_start_final_timer(self, msecs_to_jiffies(300));
/*
* Don't allow this to happen one more time in a row,
* or else we can get a pretty tight loop here if
* if we only receive half a frame. DB.
*/
self->add_wait = TRUE;
break;
}
self->add_wait = FALSE;
/* N2 is the disconnect timer. Until we reach it, we retry */
if (self->retry_count < self->N2) {
/* Retry sending the pf bit to the secondary */
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, CMD_FRAME);
irlap_start_final_timer(self, self->final_timeout);
self->retry_count++;
IRDA_DEBUG(4, "irlap_state_nrm_p: FINAL_TIMER_EXPIRED:"
" retry_count=%d\n", self->retry_count);
/* Early warning event. I'm using a pretty liberal
* interpretation of the spec and generate an event
* every time the timer is multiple of N1 (and not
* only the first time). This allow application
* to know precisely if connectivity restart...
* Jean II */
if((self->retry_count % self->N1) == 0)
irlap_status_indication(self,
STATUS_NO_ACTIVITY);
/* Keep state */
} else {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_NO_RESPONSE);
}
break;
case RECV_REJ_RSP:
irlap_update_nr_received(self, info->nr);
if (self->remote_busy) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, CMD_FRAME);
} else
irlap_resend_rejected_frames(self, CMD_FRAME);
irlap_start_final_timer(self, 2 * self->final_timeout);
break;
case RECV_SREJ_RSP:
irlap_update_nr_received(self, info->nr);
if (self->remote_busy) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, CMD_FRAME);
} else
irlap_resend_rejected_frame(self, CMD_FRAME);
irlap_start_final_timer(self, 2 * self->final_timeout);
break;
case RECV_RD_RSP:
IRDA_DEBUG(1, "%s(), RECV_RD_RSP\n", __FUNCTION__);
irlap_flush_all_queues(self);
irlap_next_state(self, LAP_XMIT_P);
/* Call back the LAP state machine to do a proper disconnect */
irlap_disconnect_request(self);
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %s\n",
__FUNCTION__, irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_reset_wait (event, skb, info)
*
* We have informed the service user of a reset condition, and is
* awaiting reset of disconnect request.
*
*/
static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(3, "%s(), event = %s\n", __FUNCTION__, irlap_event[event]);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case RESET_REQUEST:
if (self->xmitflag) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_snrm_frame(self, NULL);
irlap_start_final_timer(self, self->final_timeout);
irlap_next_state(self, LAP_RESET);
} else {
irlap_start_final_timer(self, self->final_timeout);
irlap_next_state(self, LAP_RESET);
}
break;
case DISCONNECT_REQUEST:
irlap_wait_min_turn_around( self, &self->qos_tx);
irlap_send_disc_frame( self);
irlap_flush_all_queues( self);
irlap_start_final_timer( self, self->final_timeout);
self->retry_count = 0;
irlap_next_state( self, LAP_PCLOSE);
break;
default:
IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_reset (self, event, skb, info)
*
* We have sent a SNRM reset command to the peer layer, and is awaiting
* reply.
*
*/
static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(3, "%s(), event = %s\n", __FUNCTION__, irlap_event[event]);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case RECV_DISC_CMD:
del_timer(&self->final_timer);
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_NO_RESPONSE);
break;
case RECV_UA_RSP:
del_timer(&self->final_timer);
/* Initiate connection state */
irlap_initiate_connection_state(self);
irlap_reset_confirm();
self->remote_busy = FALSE;
irlap_next_state(self, LAP_XMIT_P);
irlap_start_poll_timer(self, self->poll_timeout);
break;
case FINAL_TIMER_EXPIRED:
if (self->retry_count < 3) {
irlap_wait_min_turn_around(self, &self->qos_tx);
IRDA_ASSERT(self->netdev != NULL, return -1;);
irlap_send_snrm_frame(self, self->qos_dev);
self->retry_count++; /* Experimental!! */
irlap_start_final_timer(self, self->final_timeout);
irlap_next_state(self, LAP_RESET);
} else if (self->retry_count >= self->N3) {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_NO_RESPONSE);
}
break;
case RECV_SNRM_CMD:
/*
* SNRM frame is not allowed to contain an I-field in this
* state
*/
if (!info) {
IRDA_DEBUG(3, "%s(), RECV_SNRM_CMD\n", __FUNCTION__);
irlap_initiate_connection_state(self);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_ua_response_frame(self, &self->qos_rx);
irlap_reset_confirm();
irlap_start_wd_timer(self, self->wd_timeout);
irlap_next_state(self, LAP_NDM);
} else {
IRDA_DEBUG(0,
"%s(), SNRM frame contained an I field!\n",
__FUNCTION__);
}
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %s\n",
__FUNCTION__, irlap_event[event]);
ret = -1;
break;
}
return ret;
}
/*
* Function irlap_state_xmit_s (event, skb, info)
*
* XMIT_S, The secondary station has been given the right to transmit,
* and we therefor do not expect to receive any transmissions from other
* stations.
*/
static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[event]);
IRDA_ASSERT(self != NULL, return -ENODEV;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
switch (event) {
case SEND_I_CMD:
/*
* Send frame only if send window > 0
*/
if ((self->window > 0) && (!self->remote_busy)) {
int nextfit;
#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
struct sk_buff *skb_next;
/*
* Same deal as in irlap_state_xmit_p(), so see
* the comments at that point.
* We are the secondary, so there are only subtle
* differences. - Jean II
*/
/* Check if a subsequent skb exist and would fit in
* the current window (with respect to turnaround
* time). - Jean II */
skb_next = skb_peek(&self->txq);
nextfit = ((skb_next != NULL) &&
((skb_next->len + skb->len) <=
self->bytes_left));
/*
* Test if we have transmitted more bytes over the
* link than its possible to do with the current
* speed and turn-around-time.
*/
if((!nextfit) && (skb->len > self->bytes_left)) {
IRDA_DEBUG(0, "%s(), Not allowed to transmit"
" more bytes!\n", __FUNCTION__);
/* Requeue the skb */
skb_queue_head(&self->txq, skb_get(skb));
/*
* Switch to NRM_S, this is only possible
* when we are in secondary mode, since we
* must be sure that we don't miss any RR
* frames
*/
self->window = self->window_size;
self->bytes_left = self->line_capacity;
irlap_start_wd_timer(self, self->wd_timeout);
irlap_next_state(self, LAP_NRM_S);
/* Slight difference with primary :
* here we would wait for the other side to
* expire the turnaround. - Jean II */
return -EPROTO; /* Try again later */
}
/* Substract space used by this skb */
self->bytes_left -= skb->len;
#else /* CONFIG_IRDA_DYNAMIC_WINDOW */
/* Window has been adjusted for the max packet
* size, so much simpler... - Jean II */
nextfit = (skb_queue_len(&self->txq) > 0);
#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
/*
* Send data with final bit cleared only if window > 1
* and there is more frames to be sent
*/
if ((self->window > 1) && (nextfit)) {
irlap_send_data_secondary(self, skb);
irlap_next_state(self, LAP_XMIT_S);
} else {
irlap_send_data_secondary_final(self, skb);
irlap_next_state(self, LAP_NRM_S);
/*
* Make sure state machine does not try to send
* any more frames
*/
ret = -EPROTO;
}
} else {
IRDA_DEBUG(2, "%s(), Unable to send!\n", __FUNCTION__);
skb_queue_head(&self->txq, skb_get(skb));
ret = -EPROTO;
}
break;
case DISCONNECT_REQUEST:
irlap_send_rd_frame(self);
irlap_flush_all_queues(self);
irlap_start_wd_timer(self, self->wd_timeout);
irlap_next_state(self, LAP_SCLOSE);
break;
case DATA_REQUEST:
/* Nothing to do, irlap_do_event() will send the packet
* when we return... - Jean II */
break;
default:
IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
irlap_event[event]);
ret = -EINVAL;
break;
}
return ret;
}
/*
* Function irlap_state_nrm_s (event, skb, info)
*
* NRM_S (Normal Response Mode as Secondary) state, in this state we are
* expecting to receive frames from the primary station
*
*/
static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ns_status;
int nr_status;
int ret = 0;
IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[ event]);
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
switch (event) {
case RECV_I_CMD: /* Optimize for the common case */
/* FIXME: must check for remote_busy below */
IRDA_DEBUG(4, "%s(), event=%s nr=%d, vs=%d, ns=%d, "
"vr=%d, pf=%d\n", __FUNCTION__,
irlap_event[event], info->nr,
self->vs, info->ns, self->vr, info->pf);
self->retry_count = 0;
ns_status = irlap_validate_ns_received(self, info->ns);
nr_status = irlap_validate_nr_received(self, info->nr);
/*
* Check for expected I(nformation) frame
*/
if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
/* Update Vr (next frame for us to receive) */
self->vr = (self->vr + 1) % 8;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
/*
* poll bit cleared?
*/
if (!info->pf) {
self->ack_required = TRUE;
/*
* Starting WD-timer here is optional, but
* not recommended. Note 6 IrLAP p. 83
*/
#if 0
irda_start_timer(WD_TIMER, self->wd_timeout);
#endif
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_S);
irlap_data_indication(self, skb, FALSE);
break;
} else {
/*
* We should wait before sending RR, and
* also before changing to XMIT_S
* state. (note 1, IrLAP p. 82)
*/
irlap_wait_min_turn_around(self, &self->qos_tx);
/*
* Give higher layers a chance to
* immediately reply with some data before
* we decide if we should send a RR frame
* or not
*/
irlap_data_indication(self, skb, FALSE);
/* Any pending data requests? */
if ((skb_queue_len(&self->txq) > 0) &&
(self->window > 0))
{
self->ack_required = TRUE;
del_timer(&self->wd_timer);
irlap_next_state(self, LAP_XMIT_S);
} else {
irlap_send_rr_frame(self, RSP_FRAME);
irlap_start_wd_timer(self,
self->wd_timeout);
/* Keep the state */
irlap_next_state(self, LAP_NRM_S);
}
break;
}
}
/*
* Check for Unexpected next to send (Ns)
*/
if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
{
/* Unexpected next to send, with final bit cleared */
if (!info->pf) {
irlap_update_nr_received(self, info->nr);
irlap_start_wd_timer(self, self->wd_timeout);
} else {
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, RSP_FRAME);
irlap_start_wd_timer(self, self->wd_timeout);
}
break;
}
/*
* Unexpected Next to Receive(NR) ?
*/
if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
{
if (info->pf) {
IRDA_DEBUG(4, "RECV_I_RSP: frame(s) lost\n");
self->vr = (self->vr + 1) % 8;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
/* Resend rejected frames */
irlap_resend_rejected_frames(self, RSP_FRAME);
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_S);
irlap_data_indication(self, skb, FALSE);
irlap_start_wd_timer(self, self->wd_timeout);
break;
}
/*
* This is not documented in IrLAP!! Unexpected NR
* with poll bit cleared
*/
if (!info->pf) {
self->vr = (self->vr + 1) % 8;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
/* Keep state, do not move this line */
irlap_next_state(self, LAP_NRM_S);
irlap_data_indication(self, skb, FALSE);
irlap_start_wd_timer(self, self->wd_timeout);
}
break;
}
if (ret == NR_INVALID) {
IRDA_DEBUG(0, "NRM_S, NR_INVALID not implemented!\n");
}
if (ret == NS_INVALID) {
IRDA_DEBUG(0, "NRM_S, NS_INVALID not implemented!\n");
}
break;
case RECV_UI_FRAME:
/*
* poll bit cleared?
*/
if (!info->pf) {
irlap_data_indication(self, skb, TRUE);
irlap_next_state(self, LAP_NRM_S); /* Keep state */
} else {
/*
* Any pending data requests?
*/
if ((skb_queue_len(&self->txq) > 0) &&
(self->window > 0) && !self->remote_busy)
{
irlap_data_indication(self, skb, TRUE);
del_timer(&self->wd_timer);
irlap_next_state(self, LAP_XMIT_S);
} else {
irlap_data_indication(self, skb, TRUE);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, RSP_FRAME);
self->ack_required = FALSE;
irlap_start_wd_timer(self, self->wd_timeout);
/* Keep the state */
irlap_next_state(self, LAP_NRM_S);
}
}
break;
case RECV_RR_CMD:
self->retry_count = 0;
/*
* Nr as expected?
*/
nr_status = irlap_validate_nr_received(self, info->nr);
if (nr_status == NR_EXPECTED) {
if ((skb_queue_len( &self->txq) > 0) &&
(self->window > 0)) {
self->remote_busy = FALSE;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
del_timer(&self->wd_timer);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_next_state(self, LAP_XMIT_S);
} else {
self->remote_busy = FALSE;
/* Update Nr received */
irlap_update_nr_received(self, info->nr);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_start_wd_timer(self, self->wd_timeout);
/* Note : if the link is idle (this case),
* we never go in XMIT_S, so we never get a
* chance to process any DISCONNECT_REQUEST.
* Do it now ! - Jean II */
if (self->disconnect_pending) {
/* Disconnect */
irlap_send_rd_frame(self);
irlap_flush_all_queues(self);
irlap_next_state(self, LAP_SCLOSE);
} else {
/* Just send back pf bit */
irlap_send_rr_frame(self, RSP_FRAME);
irlap_next_state(self, LAP_NRM_S);
}
}
} else if (nr_status == NR_UNEXPECTED) {
self->remote_busy = FALSE;
irlap_update_nr_received(self, info->nr);
irlap_resend_rejected_frames(self, RSP_FRAME);
irlap_start_wd_timer(self, self->wd_timeout);
/* Keep state */
irlap_next_state(self, LAP_NRM_S);
} else {
IRDA_DEBUG(1, "%s(), invalid nr not implemented!\n",
__FUNCTION__);
}
break;
case RECV_SNRM_CMD:
/* SNRM frame is not allowed to contain an I-field */
if (!info) {
del_timer(&self->wd_timer);
IRDA_DEBUG(1, "%s(), received SNRM cmd\n", __FUNCTION__);
irlap_next_state(self, LAP_RESET_CHECK);
irlap_reset_indication(self);
} else {
IRDA_DEBUG(0,
"%s(), SNRM frame contained an I-field!\n",
__FUNCTION__);
}
break;
case RECV_REJ_CMD:
irlap_update_nr_received(self, info->nr);
if (self->remote_busy) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, RSP_FRAME);
} else
irlap_resend_rejected_frames(self, RSP_FRAME);
irlap_start_wd_timer(self, self->wd_timeout);
break;
case RECV_SREJ_CMD:
irlap_update_nr_received(self, info->nr);
if (self->remote_busy) {
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, RSP_FRAME);
} else
irlap_resend_rejected_frame(self, RSP_FRAME);
irlap_start_wd_timer(self, self->wd_timeout);
break;
case WD_TIMER_EXPIRED:
/*
* Wait until retry_count * n matches negotiated threshold/
* disconnect time (note 2 in IrLAP p. 82)
*
* Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED
* Note : self->wd_timeout = (self->final_timeout * 2),
* which explain why we use (self->N2 / 2) here !!!
* Jean II
*/
IRDA_DEBUG(1, "%s(), retry_count = %d\n", __FUNCTION__,
self->retry_count);
if (self->retry_count < (self->N2 / 2)) {
/* No retry, just wait for primary */
irlap_start_wd_timer(self, self->wd_timeout);
self->retry_count++;
if((self->retry_count % (self->N1 / 2)) == 0)
irlap_status_indication(self,
STATUS_NO_ACTIVITY);
} else {
irlap_apply_default_connection_parameters(self);
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_disconnect_indication(self, LAP_NO_RESPONSE);
}
break;
case RECV_DISC_CMD:
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
/* Send disconnect response */
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_ua_response_frame(self, NULL);
del_timer(&self->wd_timer);
irlap_flush_all_queues(self);
/* Set default link parameters */
irlap_apply_default_connection_parameters(self);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
case RECV_DISCOVERY_XID_CMD:
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rr_frame(self, RSP_FRAME);
self->ack_required = TRUE;
irlap_start_wd_timer(self, self->wd_timeout);
irlap_next_state(self, LAP_NRM_S);
break;
case RECV_TEST_CMD:
/* Remove test frame header (only LAP header in NRM) */
skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_start_wd_timer(self, self->wd_timeout);
/* Send response (info will be copied) */
irlap_send_test_frame(self, self->caddr, info->daddr, skb);
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
event, irlap_event[event]);
ret = -EINVAL;
break;
}
return ret;
}
/*
* Function irlap_state_sclose (self, event, skb, info)
*/
static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
IRDA_ASSERT(self != NULL, return -ENODEV;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
switch (event) {
case RECV_DISC_CMD:
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
/* Send disconnect response */
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_ua_response_frame(self, NULL);
del_timer(&self->wd_timer);
/* Set default link parameters */
irlap_apply_default_connection_parameters(self);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
case RECV_DM_RSP:
/* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames
* shall take us down into default NDM state, like DM_RSP
*/
case RECV_RR_RSP:
case RECV_RNR_RSP:
case RECV_REJ_RSP:
case RECV_SREJ_RSP:
case RECV_I_RSP:
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
del_timer(&self->wd_timer);
irlap_apply_default_connection_parameters(self);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
case WD_TIMER_EXPIRED:
/* Always switch state before calling upper layers */
irlap_next_state(self, LAP_NDM);
irlap_apply_default_connection_parameters(self);
irlap_disconnect_indication(self, LAP_DISC_INDICATION);
break;
default:
/* IrLAP-1.1 p.82: in SCLOSE, basically any received frame
* with pf=1 shall restart the wd-timer and resend the rd:rsp
*/
if (info != NULL && info->pf) {
del_timer(&self->wd_timer);
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rd_frame(self);
irlap_start_wd_timer(self, self->wd_timeout);
break; /* stay in SCLOSE */
}
IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
event, irlap_event[event]);
ret = -EINVAL;
break;
}
return -1;
}
static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb,
struct irlap_info *info)
{
int ret = 0;
IRDA_DEBUG(1, "%s(), event=%s\n", __FUNCTION__, irlap_event[event]);
IRDA_ASSERT(self != NULL, return -ENODEV;);
IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
switch (event) {
case RESET_RESPONSE:
irlap_send_ua_response_frame(self, &self->qos_rx);
irlap_initiate_connection_state(self);
irlap_start_wd_timer(self, WD_TIMEOUT);
irlap_flush_all_queues(self);
irlap_next_state(self, LAP_NRM_S);
break;
case DISCONNECT_REQUEST:
irlap_wait_min_turn_around(self, &self->qos_tx);
irlap_send_rd_frame(self);
irlap_start_wd_timer(self, WD_TIMEOUT);
irlap_next_state(self, LAP_SCLOSE);
break;
default:
IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
event, irlap_event[event]);
ret = -EINVAL;
break;
}
return ret;
}