forked from Minki/linux
4fc932c6d8
Rather than leaving the DAC and ADC active whenever the system is running manage their power with DAPM. Signed-off-by: Mark Brown <broonie@linaro.org>
174 lines
4.4 KiB
C
174 lines
4.4 KiB
C
/*
|
|
* ALSA Soc PCM3008 codec support
|
|
*
|
|
* Author: Hugo Villeneuve
|
|
* Copyright (C) 2008 Lyrtech inc
|
|
*
|
|
* Based on AC97 Soc codec, original copyright follow:
|
|
* Copyright 2005 Wolfson Microelectronics PLC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Generic PCM3008 support.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "pcm3008.h"
|
|
|
|
static int pcm3008_dac_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol,
|
|
int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
struct pcm3008_setup_data *setup = codec->dev->platform_data;
|
|
|
|
gpio_set_value_cansleep(setup->pdda_pin,
|
|
SND_SOC_DAPM_EVENT_ON(event));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcm3008_adc_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol,
|
|
int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
struct pcm3008_setup_data *setup = codec->dev->platform_data;
|
|
|
|
gpio_set_value_cansleep(setup->pdad_pin,
|
|
SND_SOC_DAPM_EVENT_ON(event));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget pcm3008_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("VINL"),
|
|
SND_SOC_DAPM_INPUT("VINR"),
|
|
|
|
SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, pcm3008_dac_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0, pcm3008_adc_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
SND_SOC_DAPM_OUTPUT("VOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("VOUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route pcm3008_dapm_routes[] = {
|
|
{ "PCM3008 Capture", NULL, "ADC" },
|
|
{ "ADC", NULL, "VINL" },
|
|
{ "ADC", NULL, "VINR" },
|
|
|
|
{ "DAC", NULL, "PCM3008 Playback" },
|
|
{ "VOUTL", NULL, "DAC" },
|
|
{ "VOUTR", NULL, "DAC" },
|
|
};
|
|
|
|
#define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000)
|
|
|
|
static struct snd_soc_dai_driver pcm3008_dai = {
|
|
.name = "pcm3008-hifi",
|
|
.playback = {
|
|
.stream_name = "PCM3008 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = PCM3008_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.stream_name = "PCM3008 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = PCM3008_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
};
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_pcm3008 = {
|
|
.dapm_widgets = pcm3008_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(pcm3008_dapm_widgets),
|
|
.dapm_routes = pcm3008_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(pcm3008_dapm_routes),
|
|
};
|
|
|
|
static int pcm3008_codec_probe(struct platform_device *pdev)
|
|
{
|
|
struct pcm3008_setup_data *setup = pdev->dev.platform_data;
|
|
int ret;
|
|
|
|
if (!setup)
|
|
return -EINVAL;
|
|
|
|
/* DEM1 DEM0 DE-EMPHASIS_MODE
|
|
* Low Low De-emphasis 44.1 kHz ON
|
|
* Low High De-emphasis OFF
|
|
* High Low De-emphasis 48 kHz ON
|
|
* High High De-emphasis 32 kHz ON
|
|
*/
|
|
|
|
/* Configure DEM0 GPIO (turning OFF DAC De-emphasis). */
|
|
ret = devm_gpio_request_one(&pdev->dev, setup->dem0_pin,
|
|
GPIOF_OUT_INIT_HIGH, "codec_dem0");
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* Configure DEM1 GPIO (turning OFF DAC De-emphasis). */
|
|
ret = devm_gpio_request_one(&pdev->dev, setup->dem1_pin,
|
|
GPIOF_OUT_INIT_LOW, "codec_dem1");
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* Configure PDAD GPIO. */
|
|
ret = devm_gpio_request_one(&pdev->dev, setup->pdad_pin,
|
|
GPIOF_OUT_INIT_LOW, "codec_pdad");
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* Configure PDDA GPIO. */
|
|
ret = devm_gpio_request_one(&pdev->dev, setup->pdda_pin,
|
|
GPIOF_OUT_INIT_LOW, "codec_pdda");
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
return snd_soc_register_codec(&pdev->dev,
|
|
&soc_codec_dev_pcm3008, &pcm3008_dai, 1);
|
|
}
|
|
|
|
static int pcm3008_codec_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_codec(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:pcm3008-codec");
|
|
|
|
static struct platform_driver pcm3008_codec_driver = {
|
|
.probe = pcm3008_codec_probe,
|
|
.remove = pcm3008_codec_remove,
|
|
.driver = {
|
|
.name = "pcm3008-codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(pcm3008_codec_driver);
|
|
|
|
MODULE_DESCRIPTION("Soc PCM3008 driver");
|
|
MODULE_AUTHOR("Hugo Villeneuve");
|
|
MODULE_LICENSE("GPL");
|